Bringsmart 60ktyz 10rpm Ac Motor Low Noise Gearbox Electric Motor Barbecue High Torque Low Speed 110V Synchronous AC Reduction Motor (110V 10rpm)

Works as advertised, replaced a 12v motor

Super quiet and strong little thing. Used as rocker motor for home made egg incubator.Motor is installed with a 2:1 reduction by use of #25 chain and sprockets to reduce rocking speed while doubling overall torque output with the 1rpm motor. Incubator holds up to 48 dozen chicken eggs and this little motor rocks them 35 degrees from one side to the other (70 degrees travel) with no problem, strong little motor. It cannot be heard running inside the incubator cabinet even with the door open, it is super quiet. 9 months use on the incubator now, motor has been fully loaded for weeks at a time and no issues with the motor which rocks egg trays from one side to the other every 2 hours. Wiring was no problem, husband said hot leg goes in the middle hole and neutral to top hole or bottom hole depending on which direction you want it to turn. Husband said he also ran a frame/case ground for safety. As a large cabinet incubator rocker motor it's doing the job wonderfully.

The media could not be loaded.  I purchased one motor for a prop, and it gets extremely hot! So I figured I would buy another that’s geared differently and see if that is why it gets so hot. When I got the new motor in today, it either won’t run or Vibrates and switches directions back-and-forth randomly.

Not powerful enough for the job we wanted to do

The media could not be loaded.  I was having torque issues like others have stated. I also am creating halloween decorations and wanted to try the flying ghosts over a large area. After I tried different rpm's I settled on the 60 rpm motor. The motor would work fine for a while and then start to slip. I was about ready to give up or redesign the whole project. Then I reversed the motor rotation and all was good (after a few adjustments). It appears I was trying to pull 2 sides uphill and pushing 1 side downhill. Even though the motor is now pulling the longest run uphill it does not slip.

The media could not be loaded.  Used as a cam drive motor on Christmas polar swing. Works great!

I have purchased three different RPMs types of this motor. I was able to make some VERY NICE halloween animatronics and they run for hours !

Can't go wrong with this beefy thing. I use it to turn my fishing lures as I paint and coat them with epoxy to allow for a smooth finish. This thing never hesitated to turn like some of the other smaller motors.

Se calienta mucho

Good motor

el producto puede ser bueno, el problema es que da 3 rpm, y para mi no cumple con lo que se necesita ya que lo temporizo y no queda en la posición que se requiere, se supone que es de 2.5 rpm. Al menos así lo especifica.De ser posible quisiera cambiarlo por uno de 1 rpm. es posible?