Walk Maker Reusable Concrete Molds Paving Lawn Patio Yard DIY Walkway Pavement (Cross Square)…

While I can't rate the "easy to use" option in the review as I did not end up using this for our outdoor project I can say that the product is heavy-duty, looks easy to use, and is large enough size to make your pathway project go quickly. As always, working with concrete may take a few times to get the mixture just right but watching some other videos online makes this look like a no-brainer and a great way to save money on not having to buy individual stones from the hardware store.

I made a simple pathway , straight. I used the mold to make 19 " stones " its not difficult but it is hard if that makes sense . Physical work . I used about 3/4 of a 60 pound bag of concrete per 1 mold . The tedious part is the prep . Leveling and compacting the dirt . Using the mold was the fun part . I was working solo, so it was slow and steady. I mixed my cement in a wheelbarrow . Mixing just enough for a singular mold. After making a stone I would take the mold to the wheelbarrow and rinse it off . Mix more concrete and repeat the process .A few tips I read and used was my mix worked best as the consistency of " oatmeal " when the mix was perfect i could lay the concrete in the mold , compact it with my hand tools and pull the mold up right away .I used basic no frills Quick rite concrete mix.I had one small bag of high end premium concert mix on hand already and it made a much smoother mold stone then the cheap concrete mix that had more rocks in it .I would recommend to decide on one type and stick with it to make sure your stones look the same .My best tip is to make 1 or 2 extra . In my case at the end of my walkway I didn't have room to fit another full mold so I was able to use the extra one for the 4 small pieces that I needed .Start with your extra ones first or start where that stone will be hidden or blended in.That gives you a buffer to get your mix and technique down before you make the stones that will be seen first.The mold washed up well after and is hanging in garage to be used again if neededTwo people and two molds work best.Pretty slow with only one but I was in no hurry .

This mould is thick and sturdy, but I wouldn't say it's easy to use. One 80lb bag of concrete mix makes exactly 3 of these. Depending on the area you're doing... That's a lot of 80lb bags. I did a couple test runs with different concrete mix before I decided that I did not want to use this, and instead just buy the flat square pavers from lowes. The pavers won't come out smooth as shown in the pictures, one thing to keep in mind.

This product is great and made of strong plastic. Very easy to maintain.With a rinse of water after every use it’s ready to be used for the next application.making a patio area around a bbq area with it at the moment and I am very satisfied with the results so far.

This is a nice product. Easy to use and sturdy. Easy to clean and reuse over and over. Thanks!

Only half of the mold arrived. What happened to the other half of the mold. This one only had five holes, there should have been eight holes.

Both of them broke on the first use. Why do they need to be in 2 pieces? They break as the seam where they snap together. Don't waste your money on these. Buy one that is a solid piece.

It does work, it just takes forever if you try actually using it as a mold. This kind of thing seems much more suited to being used to press into a premeasured concrete slab.