Fredbeck Double 24x84 inch White Barn Door with 8FT Barn Door Hardware Kit Included,with MDF and Wood,DIY Assembly,5-Panel,48inch barn Door,Fit 45in-47in Opening

We took our time putting the door together. It was surprisingly easy. The door glides like butter. The hardware was all there. The instructions were simple to follow and the measurements provided were precise. We bought two and were able to assemble the hardware and attach the door within a few hours. We assembled the door a few days before we completed our project which help with time management.

Beautiful sold wood with hardware, but no lock. Amazingly comes in two half lock together pieces. Dont worry it fits. I was terrified that I had ordered the wrong door because it comes in a box half the width of the door. We love it.

Very happy with the doors, but the instructions are very poor. If you are not experienced with installation you may need some help. Example, instructions state to use door length plus 1 11/16. Actually you need to add 1/2 inch for door bottom to clear carpet and guide. I bought an after market slow open and I am glad we did. On a dual door at 21 inches, having slow open and slow close does not work well, too tight. If the doors do not hang even you can loosen the door rollers, get them straight and then retighten. The doors take about 20 minutes to assemble for each door. I would purchase the doors again.

For the price, the door is going to be unmatched, this review is going to be for the (2) Doors - 24" Inch / 84" Inch. Mostly I'd like to impart some information that might save someone some time. I highly suggest you check every inch of this product before putting it together, one of the panels was screwed up and I had to call the company for one. There is absolutely no extra anything in the box.Needed: You absolutely need a buddy, a large level, drill with hex bits, and some patience.1. By a header board, I suggest a 8FT - 6" - 1" Thick OAK with about 10 Lug Screws. Screw those suckers into only STUDS after doing the recommended measurements. Prior to screwing that in, I suggest you measure out the railing on the board and ensuring it is level. Then screw the board in.2. Since you wisely measured out the rail and the six screw ins prior to installing the header board, you will be able to quickly put them up and level them out. I suggest only putting one rail up and then putting one door up to ensure the height is what you want. If it is, then repeat for the second rail. If it isn't, then move the rail down on the header board.3. The guiding fixture on the bottom (to prevent swing of back and forth) sucks. I went out and purchased (4) smaller black L Brackets. I put felt on the inside of the L Bracket and put two in the front and two in the back to prevent swing. Technically you are supposed to screw those fixtures or the L brackets into the floor. Screw that, just get some command strips so you don't ruin the floor.4. If you have a cat, dog, or curious child, these doors open really easily. You can easily screw in some type of hooking apparatus in the front (not pictured in my pictures) or what I did, put magnets on the inside of the doors by the handle so they keep closed or close easily.Anyone saying they screwed the rail directly into studs without a header board must have a perfect home. It can be done, but may luck be in your favor. Do yourself a favor, get some nice oak and put the header up. I will stain mine (easy to take down the doors once the whole thing is installed) and it will look good.

Get it!!!! Works amazing, looks so good and easy to install. Can’t believe what a good price point too!

Wouldn't have bought it if I knew you need to assemble the door itself comes in several small pieces. I figured 2 hours to hang now add a week to piece the doors together.

When we first received this door last summer 2024 it was super easy to put together install and it looked gorgeous. I would’ve given it five stars if I had done the review back then. It arrived on time there was no damage and it was a decent price. But now in less than a year, the right vertical panel has warped. It’s having a little trouble closing back-and-forth. It’s still gorgeous, but just know that it is possible for that panel to slightly warp. It’s in an area where you can’t really just look at it and tell, but you can tell when you open and close it and you look at it from the side. It’s not a bright white it’s kind of like a light gray but again it’s gorgeous in our new place.

I originally ordered just the hardware with no real plan for the door itself. Before the hardware arrived I found this barn door that came with all the hardware including the handle so I returned the original hardware only order. Best thing I could have done, the door was all set up with all the holes drilled and notched. Instructions were complete and easy to follow to build the door and install the hardware. I replaced a swing door that swung into a small hallway that interfered with the bedroom and closet doors with the barn door. It did exactly what I wanted it to do, now no interference with the other doors. Was well worth the money and convenience having the factory door with the exact hardware needed.