12" Haliant Surface Element fit for GE WB30T10130 AP4344395 PS2321564 AH2321564 fit for GE Glass Cooktop Burner Stove Replacement Parts Radiant Heating Element 12 inch 204V 1800W 2700W LUXRILIX

Price is great. See pic for mod and it works perfect. Need 2 1/4" pushons non insulated and crimper.Ohm Values: Whirlpool Old: 22-2600w 46-1250w GE New:28-1950w 58-1050wDo not forget to unplug the stove please! Switch will work with the lower wattage GE element.WB30T10130 12inch Haliant Dual Radiant Surface Element Compatible with GE Stove PartsReplace PS2321564 1474216 AP4344395 EAP2321564 On Amazon $80.001: Before putting the legs on, lay the new one face down with the older ontop. Mark were the holeswhere the legs will match closely and swap to the new element. It had aligning holes already.2: Change out both small Org and Blk pushons w/ newer large ends. Switch the original large Orgpushon wire around other side on the block for the 240 common leg feeds. The small Org will goin it's place for the hot indicator ckt. Red/Blk goes on the closest spade 28ohms (1950w element)and the Red/Wht to the farther spade 58ohms (1050w element).NOTE: Use non insulated 1/4" 14/16 awg pushon or remove the plastic on the 2 new pushon terminals!

The connectors on this were not the right size for my range (even though my range model # is included in list of compatible models). Replaced connectors in my stove to fit this unit. Then on very first test the outside coil on the element did not work. I took back apart and it appears the coils in the heating element were not sautered into spade connector during manufacture, just clamped into place, and the outside connector was BROKEN and not connected into clamp. I guess I will try to see if there is anything I can do to repair that broken connection. I'm just not sure how this company can get away with selling broken merchandise.

Installed the dual burner, connected the electrical and the stove top is now back to full functionality.

This elements works perfectly and as super easy to replace. The only reason I gave it 4 stars is the metal electrical tabs the stove wires slide onto were wider than the original tabs. I had to modify the tabs to be able to connect the wires. The other option would have been to get new push on connectors and that was more trouble that I was willing to deal with. Other than that the element was exact the same as the old one and works exactly as the old one did.Update: Element only lasted about 8 months and I am in need of a new one. Definitely going to have to do more thorough research on my next one. Did work fine while it lasted. Original burner that came with the stove lasted 6 year under heavy use.

Defective and not replaceable. Middle ceramic support missing. Three of five male spade contacts was the incorrect size. An apparent small black discoloring apparent. This part appeared to be a used or rejected part.

Everything was great so far except crimp type male connector to wide. A little bit of work with a dremel and got them ground down to fit. Don’t know if this is because stove is a bit older maybe and they have since upgraded it. Other than that so good so far if nothing catches fire

Perfect fit for GE range top. Working perfectly.

Half of the dual element burns out in 2 months the return window closes in a month. This is the 2nd time that I have replaced it.. works well at first till it burns out.