Dash Cam Hardwire Kit, Pelsee Full Set Hard Wire Kit Fuse for P1 Duo Dash Cam Only, 12V-24V to 5V Car Dash Camera Charger Power Cord, 4 Fuse Cable and Installation Tool

At the price Point it is, I was a bit shocked considering the alternative available cables for a single and double camera start at as little as £7.99. The cable itself is fantastic and works well but do your research first about how to tap it in, the fuse taps have a plus and a minus terminal and you don't want to get them in the wrong way. Also keep the cables away from your airbags !.Otherwise I'd give it a 5☆(Even at the price point as it is the only one available).Simply put if you have a P1 duo and want a hardwire this I'd the cable you need so buy it and fit it if you can or get someone else too do it that does.Great Cable 4☆Length 5☆Fitment 3☆ (You need to no how don't just assume 🤦)Quality 5☆ (It is the only one available for the P1 Duo)Overall for me 5☆

great for having finishing the set up of the dash cam

Very good thanks

Good kit, came with enough parts to ensure I could get it fitted without scrounging for bits. The ground is a bit wonky but I found a good grounding nut and with it screwed down, it wont come loose. For some reason the rear camera lead comes all the way to the front and near to the front camera mount so I had to fit that cable into the headliner. probably would have been better closer to the leads so it could be hidden near the fuse box. But I don't know much about these things, there is probably a reason its built like this. Its a good quality cable, it was long enough to be routed and once wired in, the cameras worked.

From Amazon Warehouse. Box torn open and squashed, no push tool with it. All fuses provided are 15amp, so had to buy more fuses to fit this to electric central locking circuit (7.5 amp) for constant and a 10amp fuse for the electric power steering, ACC.I bought this for the Pelsee P1 Duo dash cam so that the camera would record 24/7. It does, sometimes.Now, I haven't fathomed out yet if its the camera or the hardwire kit but, the camera records for hours on end and then quits recording for 3 or 4 hours and then starts recording again. I might be missing something here, so if anyone has one of these cameras hard wired and can give me any insights, I would be grateful.

Sometimes works others not

Yellow wire to constant supply, red wire to ignition on supply and black wire to ground, all checked with multimeter as working. The camera turns on with the ignition and works as normal when the ignition is on, however, when the ignition and engine are turned off, the camera turns off. The camera is supposed to go into parking mode and stay on using the always on yellow wire and volt limit transformer, it does not, it stays off and monitors nothing, even though the yellow wire is supplying 12 volts to the camera. If the yellow wire is disconnected for a few seconds and then re-connected, the camera starts up, but short of fitting a switch inline with the yellow wire, this is impractical.

Price is bit high, other than a very good products. Easy to install…