T-Lock Perfect Level Master - Professional Anti Lippage Tile Leveling System - 500 Tile Leveling Clips (1/32" (1mm))

Best ever solution for a perfect tile job. I had a floor not completely even and flat, but these devices brought all the tiles up to be flush at the surface, and even leveled out the length of the floor (i used 12x24 tiles offset by 50%). THis job turned out way better than i expected, really due to these devices

Works great as advertised!

Works as intended if known how is therefore lol

The principle behind this product is impressive. Utilizing these along with the Wedges do make the floor MUCH easier to level. But there is a few important considerations:1) Make sure (extra sure) that the grout lines are free from the majority of floor cement - especially around the clip. Clean some of the lines cement away from the edge before putting down the next tile (many many good videos on YouTube)2) IF you need to stop for the evening before the floor is done - make sure you clean the cement from the side of the tile - AND - most important, install clips as if you were going to continue. This will make your life much much easier for when you start again.Overall they are a great product but keeping the grout lines clean and clear will save you all kinds of time of cleaning up before grouting!

This system works quite well, and after using it for the first time I was very happy with the results. Word of caution, make sure you use these during your layout, as not all products sold at 1/8" are the same. Also, do not allow for too much mortar to build up around them or else they will be tricky to remove after they have dried. The ones with the proper amount of mortar around/beneath them removed just as expected, but the other required more effort. For quick removal I recommend an oscillating tool with a wood blade. You can easily cut out the left over plastic and mortar without damaging the tile. The blade will be dead by the end, but well worth the time and energy saved.I will be using these again, but I am also going to try out other clips due to the pricing of these. These are the most expensive of the ones I have found, and the others seem to do the exact same thing.

I bought these to use for setting some large format tile (16x32). I've done some tile work before, but these are a game changer especially with the larger tile. They enabled me to get good clean lines and level tile without any unevenness with the large tile. They break off easily unlike some cheaper options I've used in the past. Although these are pricier than other options I think they are worth it and provide a better experience.

I have used this system enough now that I feel a great review is in order. I run my own Home Improvement business here in the Myrtle Beach, SC area and have used this system many times now. I do not claim to be a professional tile contractor but do know that I am picky when it comes to my work and know how to do it right. This Perfect Tilemaster Leveling System helps you to obtain professional results. I have seen work by self-proclaimed professionals that should be using this system for the "lippage" that is present in their finished work. Many would say what's the big deal with a little lippage, you have to look close to see it. Well why not provide your customers or yourself with the best job that you can when tiling a shower or a floor for it can be a considerable investment and you want it to look it's best. I have not used any other leveling systems out there to be able to compare for when I have prepared the subfloor and cement board properly this system has always worked fine for me.*Tip: There has been much said about making sure that you remove the thinset or mortar from around the clip if there is any present. If you do this as stated all clips will remove just fine.

We have been using these for years. I would not accept anything that does not work well. Tips: on marble you need the shims to be clean so you don't scratch the marble. If you mortar the clip in too much it wont break off as easily as it should. You will end up trying to cut it out with a knife. (not good). We try to use non modified mortar whenever possible because its much easier to keep the whole jobsite cleaner. Modified mortar is more sticky and harder to wipe things clean causing clips to get stuck way more often. Modified mortar is better but non modified is fine and has been around much longer. One other tip is if you don't do the whole floor in one day don't forget to install the clips at the end of the row and use a level to make sure that the last row is flat to the rest of the floor.