AJ Sign WorldBest 1" Ultra-Thin Permanent Double-Sided Tape for Arts, Crafts, Photography, Scrapbooking, Tear-by-Hand, Paper Backing (1-Inch by 164-Feet/55 Yards)

Sticks very well. Easy to handle too

I repair, rebuild, and restore travel trailers. Once a travel trailer is more than a couple years old interior repairs are extremely difficult to accomplish because exact match interior vinyl-covered wallboard and seam tape is impossible to find. Fortunately, if you know where to look you can "recover" pieces of interior wallboard to use for repairs. This leaves the matching seam tape, which is used to cover the joints in the wallboard. With this product I can make my own seam tape from scraps of leftover interior wallboard. I rip 1" strips of wallboard on the table saw then peel the vinyl wall covering off of the cut strip. Cut a length of this double-sided tape, apply it to the back of the 1" vinyl strip and I have matching OEM-style interior wallboard seam tape. I am very, very pleased with this product!

Needed some thin double sided tape for basic mounting purposes. Small bits and pieces here and there, but nothing too important as I did not hold out to this tape being able to hold anything down. After a while I decided to see how this tape would hold up securing speakers, coaster carrying dragon statues and the like to my desk, and honestly I was a bit surprised. If I grab anything that I taped down using this and try to shake it off, my entire desk will move and 'wobble' before this even budges.Still wouldn't use it to support anything on a wall, ceiling or anything similar, but to keep most smaller objects from moving I'll be glad to have this around.

I am extremely satisfied with the product. This is the 1" size which I purchased recently but I previously (Feb 19th, 2021) wrote a thorough, detailed, long-winded review for the 2" size which says this about the product, here it is:This double sided adhesive is perfect. I am a demonstrator for a rubber stamping company and I mostly make hand stamped greeting cards. When I have fine, die-cut pieces I need to adhere to a card, glue can be very messy and I've found this double-sided adhesive to be quite excellent.You apply this product to the back of the cardstock piece that you will be cutting from. As you roll it off of the roll, you expose one side of the adhesive (just like a roll of tape) which you then stick to the back side of the cardstock you are going to cut. The other side of the tape has white paper backing that is left on until your piece is cut and ready to be adhered.You roll off and cut whatever size you want to place on the back of your cardstock. Then after you die cut your piece, you just remove the white backing to reveal the adhesive and stick the die-cut piece down. Easy Peasy.I've used several different brands of this type of product all of which have come as "sheets". For the sheets, you cut the sheet to fit the cardstock piece, peel back one white protective layer from the cut sheet revealing the adhesive and then attach it to the cardstock. Then after you die-cut your cardstock, to attach your die-cut piece you have to peel off a second layer of white backing from the other side, which creates an additional step.The sheets have areas at the edge of them that help you get the backing off but when dealing with left over pieces of the sheet that aren't near an edge it can be difficult to get the backing peeled up. The two layers of backing on the sheets are very thin and that makes it hard to remove it... and sometimes the adhesive wants to come up with the backing. So besides the additional step of peeling off an additional layer of backing, it can sometimes be frustrating getting the backing off properly when using the sheets.Additionally, the adhesive itself that the sheets use may not always the best quality. It can be stringy or thin causing it to peel up easily when removing the backing or it may not be very strong, giving a weak hold. Sometimes I've found it doesn't cut well when using dies (or at all) around fine details so you end up with adhesive where you don't want it like in small fine holes. Then it can end up just as or even more messy than if you'd just used glue.I have found that the 2 inch size of this product in tape form is so much easier to work with than the sheets, especially for smaller die cuts, and it seems to be the perfect size universally for what I need it for. But it does come in many different widths (including larger widths such as 3" and 5") and I do have occasions for smaller widths so I ordered another roll that is 1" wide .I have never had trouble getting the backing off of this product and the adhesive is perfect, just the right thickness and consistency and it bonds firmly and completely. Adhesive quality matters and I have been very satisfied with the quality of the adhesive this product uses.And you get a lot! It will last you a while and you will waste less of it. I ordered the 2" roll in January of 2020 and I still have a lot left (keep in mind too that I also use it when I prepare card kits for multiple people, so I use it a lot). You can use it frequently and it will last you a long time. That is something I really appreciate about this product because I'm tired of companies that price gouge crafters. When possible, I avoid buying any products from companies who take advantage of crafters.This product is also neater to use and store as you don't have all the little left over pieces in different sizes to deal with like you do with the sheets. Virtually none of it goes to waste. It is easy and convenient to use. It was also reasonably priced.Because of it's price, convenience, quality and functionality, I highly recommend this product and I will purchase it again. And to be clear, this is my own personal opinion which I was not asked for or offered anything for giving. I just like giving credit where credit is due and sharing what I think are good finds with other crafters!

I recently started making greeting cards out of photos. I needed something to stick the photo onto the card that would be thin not to raise it but strong enough to keep it on the paper. This did the trick. Highly recommend. The only reason I didn't give it a 5 star review because it would be PERFECT if there measurements on the roll that showed how much you are cutting off. I have to measure each time and that's a little annoying. So I hope the manufacturer reads this and adds that.

This tape just works, and it's nice and wide and easy to use. I had to put it along a door jam and them place foam over it to fill an air draft, and it performed perfectly. And there's plenty more tape in the roll to use on many other projects. Maybe more expensive tape would be better, but this worked perfectly.UPDATE MONTHS LATERJust used this for a much bigger door in our main entry where the rubber door seal was peeling off. It make the repair super easy and feels very strong. So far this tape is really helping with small repair projects.