QLLY 4 inch Adjustable Metal Furniture Legs, Replacement Leg for Sofa Couch Chair Ottoman Cabinet, Set of 4 (Black)

These legs worked as per the description. I would point out that some reviews indicate that it is difficult to screw the legs into the mounting plates, and it is true, because of paint (or similar) coating the threads that need to mate. But all I had to do was screw each one in about half a turn, remove, and brush away the paint that this took off the threads. Repeat, going a half turn or so further, and unscrew again. It took some time, but left me with legs solidly attached to the plates.

28 inch Adjustable Metal Desk Legs.1. I mounted onto a 2.5’x 3’ ¾” finished plywood. Each of the four legs and brackets had a decent black paint coating.2. Each leg was individually wrapped in a plastic sleeve. The four brackets were in one bag which also contained a smaller bag holding the mounting screws. The whole set was in a square long box with padding on each end.3. Mounting brackets were not warped so mounted flush. The threaded rod for the legs was the appropriate length (if threaded rod was too long, it would not allow leg to seat fully into bracket when mounted – one reviewer commented on poor fit of legs into bracket).4. The threaded rod for each leg had light coating of paint. So the rods threaded snugly into bracket without any wobble. I test fit each leg into a bracket to ensure a snug fit, being concerned over that one reviewer’s comment about not being snug. Recommend you do same as if they are not snug, you’ll want to know before you mount the brackets. You’ll probably need to remove the leg from the bracket before mounting the bracket to your table, unless you have Popeye wrists and install screws manually or have some special joint on your power drill. I used a 3/32” drill bit to pre-drill holes for the mounting screws. You’ll probably want to mark maximum depth on your drill bit so you don’t drill all the way through your table. I used painter’s tape.5. There are five screws per bracket. They are a smidge over 5/8” long with Phillips head. The set came with 21 screws (one spare provided which I appreciate). Screw heads were not rounded when I installed screws into brackets with a power driver.6. Each leg is adjustable after installation by means of a threaded foot on floor end.7. The set came with no instructions. Seems intuitive, however, you know what they say about assumptions.8. Price was reasonable compared to what I saw in the big box store, where they sold the legs and brackets separately and at higher cost.9. The finished table is quite stable. I wouldn’t stand on it, but it’s fine for a desk.10. The legs go straight down from mounting bracket.

Why did you pick this product vs others?:Nice quality legs although I returned because I ordered the wrong size. I reordered correct length next time.

Very fast response time in getting this order. The price point was spot-on for a set of 4 table legs; we received 4 legs and necessary hardware for what many companies were charging for 1. The legs are heavy duty and very stable to support table top. We only needed one for the end of a wall mounted RV table. We are keeping the others in case we need another support system in the future. We appreciate purchasing the product from a US small business. The only thing that could've made this product sale better would have been the option of purchasing legs individually to coordinate with our actual need for only one vs getting the set of 4.

Works perfect for my application. I had a table top for my craft room that needed legs, these are just what I needed. Very sturdy, easy to install. Height is correct without any adjustment but having the adjustment available is great if needed on a hard floor. My top is white with black edges so the black legs look great.

Great product durable and strong

They got the job done. Building a paint stand and it is a convenient and cost-effective solution.

Simple and adjustable but how they coated material, it go the threads and made it difficult to get started and not cross thread them. I had to attach them first to scrap wood and carefully twist them. After I got that right I attached them with the included screws to the desk.