1.5 inch Hubcentric 5x4.5 Wheel Spacers (70.5mm Bore, 1/2x20 Studs) Compatible with Ford Mustang Edge Crown Victoria Ranger Explorer, Lincoln Town Car Mark 7 - Silver 5x114.3 Adapters, Pack of 4

Product was delivered very quickly, quality of the spacers is what is advertised, high quality aircraft aluminum. Placed them on my 2007 Mustang GT and they make the car have a very aggressive stance. Take your time on the installation, and check to make sure your spacer is flush with your rotor. Make sure that you clean old dirt and rust from the rotor prior to installaion to make sure that the spacer fits flush against the rotor. Remove the lug nuts provided with the spacer to secure it on your existing studs. Make sure that once the spacer is installed that the existing studs are either flush with the outside of the spacer or deeper. DO NOT allow the studs to stick out of the hub at any length it would be very dangerous if the spacer is not flush against the rotor. If they protrude any you will have to replace the studs with shorter. Make sure you torque each nut to manufacture specs 100 ft/lbs. Install your wheel onto the spacer studs and you are ready to rumble. Happy Motoring!!

These worked GREAT for mounting late model Grand Marquis wheels (2009) onto my 2000 Grand Marquis. Width was perfect for my application, hub size was perfect, and the quality and finish were so good it was a shame they got covered up and hidden by the wheels. Install was easy.

I installed these on my crown victoria to run some mustang cobra rims on it and man it looks good.the only problem i had was when i installed the wheels the hub on the spacer was slightly big if not the same size as the wheel opening...when i installed the wheel it like pressed the wheel onto the hub and it was a b**** to get off.when i finally got it off what i did was used a flat head screwdriver and a hammer and punched the hub part on the spacer in slightly all the way around so my wheel isn't pressed on the spacer hub:/... But its good now.wheel comes on and off no problem.

This Hub centric wheel spacer, easy to install, fairly priced for my budget, I drove 618 miles all highway drive, stop and go traffic, 90 mph for miles and wheels still on lol approximately 2000 miles I have on them, with abuse, bumpy roads, trashy railroad bumps, swerving, hard stops, drag races, and they are still on. Risked a lot for y’all. I would recommend.Just remember to check ‘em once in a while like you check your oil

These spacers will give your ride a nice aggressive look, and I have personally tested their durability to be proven strong. The wider stance will prove for more control over your vehicle in conditions like rain and snow also.

Works like it should. Great fit on my 2008 crown vic wirh a 3in lift and 32in tires

We are not car people but we took it to Ford and didn’t work out for my sons car so my review may not be very important but the return service was great

Shopped all over for these... were 2 to 3 times the money.. he says easy install.. he’s approved of the way they are made !