Lid Stay Hinge in Satin Nickel MOYODOR Folding Lid Hinge with Soft Close, Perfect for Toy Box/Kitchen/Wardrobe/Cabinet Door, 35lb (Modern Style 1pair)

Pros: Looks nice installed, Easy to adjust tension on rod. You can figure out where to install the brackets for both arms Cons: No instructions for attaching arms to brackets. Attaching the arms to the brackets takes some work, since there are no instructions that cover that step. You can use the 2 plastic tabs to space arm connector to the bracket, facing the narrow part of each tab towards the bracket hole on either side of the arm connection. The hinge works smoothly and looks nice. I'd recommend it since you have a lot of flexibility on how to configure it, and you don't need to measure as you can work out where to drill the holes easily.

These brackets perfectly solved a problem with a cabinet door in my 5th wheel camper. Was easy to adjust the tension and appears very sturdy. Only issue, as others have noted, was the instructions - not very instructive at all. Regardless, I would not hesitate buying more sets of these for other cabinet doors - I like these better than the gas struts on the rest of my cabinets.

The hinge's friction tension is adjustable, allowing it to be tightened or loosened depending on the weight of your lid and the speed you want it to close. I installed it on my wife's 60-year od toy chest, that we now use for our grandkids when they visit. My wife mentioned that she feared the lid could be accidentally closed on one of our young grandkid's finders, causing great pain. On one of the pictures, you'll see the lid has been closed to about half-way, and it stys there until you add more pressure to have it close. This hinge checks all the boxes: attractive, fairly easy to install (after a wooden brace was secured for the bottom of each bracket), adjustable, and unobtrusive (from the outside). Well worth the money.

I was in need of something QUICK because the locking hinge on my wooden storage chest failed, smacking me in the head. This product offered Same Day Delivery, so I bought. When you remove it from the package, it looks okay. Hardware, screws, and allan wrench are included. The instructions look like a terrible grade B movie that was translated from Chinese to English. The written text makes no sense whatsoever. The drawings aren't much better. If you buy these hinges, search You Tube for guidance. I watched You Tube video and chucked all the instructions. I might have sent these back if I were not in danger of a concussion from the lid falling on my head again. So, since I had it in hand, I installed and will use these hinges for as long as they last. The biggest problem is that you cannot get it as tight as you might like with the cheap allan wrench and the allan screw. As I tighted it with the allan the head of the screw and the cheap alan begain to fail. Because of this, I cannot get it any tighter than it is right now. The metal on the allan and the alan bolt head must be made of cheap soft metal. As it is now, It will remain open up to about a 45-50 degree angl from horizontal. As you continue to lower the lid the hinges do not offer any real resistance. I am not going to test this, but I'm pretty sure that you could suffer smashed fingers. If this does not get any worse, this will serve my purpose because I ONLY want it to hold the lid fully OPEN. Even though this seems to release the lid as it gets past 45 degrees, this is not a big concern to me. But, should open/close move the allan bolt, it's unlikely that I will be able to tighten it back up because the allan wrench will no longer get a good grip on the allan bolt. At that point, I'll be looking to replace these hinges with something of better quality. As a recommendation, I'd categorize this as a DO NOT BUY. Even if I had to pay a little more, I would purchase a higher quality product as I'm pretty sure this will not last

This device is garbage. The "Modern" iteration of this device relies on a flimsy little gray plastic claw to keep the hinge on the axis. One of the four cracked during installation. I contacted the seller and was told they did not have parts available to send me but if I wanted to buy another they would try to make it free. Manoj, the Amazon texting helper, disagreed. I used heat to make a flange out of the broken piece. It's just a matter of time before it fails again. I did notice that others utilize a screw to keep the pieces together. Go with those. I can't imagine why I did not see any other users experiencing the same problem I had.

Works great. Closes nice it does stop a inch or two from closing and stays in place for almost a minute then closes by itself.

I did not have the installation that they had planned for but I was able to work out an installation. For these to work they require a very precise installation.

Instructions are horrible. Pictures aren't great, translations are bad. Figured it out. First one went on fine. Hardware for the second was bad. Hinge pin screw only engages 1/4 turn. One not enough to hold lid up and second rattles and seems like it is going to fall out.

Attention au sens d'installation de la quincaillerie car sans le faire a l'endroit les pièces vont usées prématurément.. voir photo pour installation correcte, le manuel est clair pour les dimensions mais n'indique aucunement le sens des pièces de plastique et métal ... le bout en angle et droit peuvent etre inversé en haut ou en bas mais pas le sens de la vis... le bout du filletage doit etre vers l'extérieur (bout qui ressort comme une bosse)

Very happy

Works as described

My 13 year old son put it together...its perfect for my storage ottoman!!! I'd buy this brand again...!

Exactement ce que je m'attendais. Chez Rona $23 pour une seule charnière, pour $35 vous en avez 4 chez Amazon.