DeLonghi Steam Valve

fit my delonghi magnifica perfectly and works great now- also changed brew o rings. better price, service and delivery than a previous parts supplier.

Fits my Delongji Magnifica ESAM3300 perfectly. I have several of these workhorse machines and the steam wand is used for every drink. Eventually the seals wear out and liquid drips from the valve during startup or brewing. This is a low cost replacement with an OEM-equivalent quality that I’ve used for hundreds of drinks so far. Installation is easy and requires removing the rear and side panels. Pay attention to the order in which the front panel screws are attached to save time reassembling. You’ll need a pair of needle nose pliers to remove the positive & negative leads (note the positions of your existing valve and staples retaining the hose. IMPORTANT: You’ll need to remove the o-ring from your existing steam wand and use it with the replacement. It it seems stuck, carefully use a needle to loosen and remove. This repair shouldn’t take longer than 10 minutes, but while the machine is open I recommend checking for any leaks which may indicate an o-ring replacement is needed. Don’t forget to lubricate the infuser and if you haven’t done so, you may wish to replace the orange high pressure o-rings in the brew unit as well as the generator. Easy to do and restores pressure to the machine.

Forgot to get the o-ring out of the old one. Water all over the plave when I started it up. Pulled the side pannels and front panel again. Retrived the o-ring from the old one. I gently fished it out with a toothpick. Very concerned that I might damage it and the machine would be down until I got a replacement. Put it on the hose reattached to hose and clipped it in place. Once I buttoned up the machine and pushed to start button. No leak!If I had to do it over again I would get a new o-ring and steam knob and replace them all together.Glad I didn't have to send it off to fix.

Better price than other replacements websites. Fit perfectly and was easy to install

The media could not be loaded. The unit works great until it decides to activate itself without the nob being turned. When this happens, the pump and the heating element is activated....since the nob is not turned, it will not let the steam out and creates pressure. The first time this happened, it created a ton o pressure and the steam blew out super hard. I’m glad I was around, this could of been very dangerous. Amazon is sending me a replacement and hopefully this won’t happen again.

This is a direct replacement steam valve for a leaky steam valve on De'longhi magnifica esam3300 espresso machine.

It is a perfect replacement for the broken wand on my Delonghi Magnifica. It took me 10 minutes to replace it.I do have one complaint, it does not come with a gasket that goes from the hose to the wand. Fortunately, the old gasket worked just fine but, it would be better if it was included.

Perfect fitting replacement for my leaking steam wand.Installation was easy, until I turned on the machine and water leaked everywhere. Disassembled again and figured out that there was an O-ring missing where the water tube connects to the wand. I had already tossed the shipping package so I am not sure if it was not supplied or if it fell out of the spare steam valve assembly during transport, consequently I will not deduct points for this. I reused the old O-ring and everything worked fine afterwards.It's a fairly quick and easy repair and you can find a youtube video online on how to do it.