Prime-Line M 6258 Frameless Shower Door Bottom Seal for 3/8 In. Thick Glass Doors – Stop Shower Leaks and Create a Water Barrier, 36 In., Clear Vinyl (Single Pack)

This shower sweep works really well for stopping water from leaking out of the shower. It fits securely, is easy to install, and helps keep the bathroom floor dry. Good quality and holds up over time.

It was longer than I needed, took a hacksaw and cut to the correct length and installed on the shower door. Worked exactly as expected. Be sure to measure the thickness of your glass door so that you order the correct fit since there are several to choose from.

This is the second replacement for my shower door. They seem to last about 3 years, which ma,especially it durable. The plastic is strong, making a very sharp knife necessary to cut the strip to the proper length. It prevents the water getting out of the shower. The only concern is cleaning the plastic since it is a very tight fit over the glass door. Removing the strip on a regular basis to clean is not really a viable option. Otherwise it is a great product and will continue to purchase when necessary. The quality is excellent

I fit great on the glass width and is very sturdy! My girl math made me not take into consideration the bottom part, so I did have to cut the entire bottom part off because my shower is raised a bit, so it wouldn't fully close. After I cut it a bunch of times with kitchen scissors, it worked! I did have to heat up a spoon to push the sturdy plastic down, so my door could close a bit better. If the company is reading these comments, can you please make one that doesn't have the bottom flaps that touches the floor and possibly the corner make it so the plastic is a bit more flexible. I love that it's SUPER sturdy but my door doesn't close all the way because it's sturdy and it angles out. But again, my fault because I'm not great at measuring. I've had it on for a couple of weeks now and no water is coming out.

Fits perfect on my 3/8 in glass door. Easy to install and keeps the water inside the shower.

This fixed our problem almost 100%. We just built a new house and decided to have frameless shower doors because we had seen some in a nice hotel we stayed in and we loved the look. I also loved how there was no u-shaped metal track on the bottom of the shower for the door to sit in, which can turn into a hard to clean place for dirt to collect, not to mention it can be ouchy on your feet if you step on it or stub your toe. However, the shower in the hotel did not have a sweep like this, and after using it, we ended up with quite the puddle of water on the hotel bathroom floor. I figured it was just poor design of the tile ledge that the door hangs over, and if we simply had our builders make sure that the ledge was sloped enough, the water would run down the door and continue down to the drain. However, after our beautiful bathroom was completed and we moved into our house, we quickly discovered that we too were having water escape under the glass door and all over the floor. I Googled the problem and discovered these clear shower sweeps that people were raving about and decided to give it a try. It's not very expensive and it installs simply by sliding into place with no glue or adhesive, so there was really not much risk involved. (The lack of glue also means it is easy to remove for cleaning purposes.) With super fast 2-day shipping, it came, we clipped it on the door, and immediately our problem was solved! We had almost zero water escaping the shower. The remaining escaping water is caused because we also have a slight gap along the side of the shower door where the occasional well aimed drop or two can find its way out, but it is minimal enough that we have not opted to also install an additional h-jamb along the side of the door because the h-jamb will not allow the door to continue to open either into the shower or out into the bathroom space (you have to pick which way you want the door to open, instead of having both options). But, if we decided in the future that those extra escaping drops were overly problematic, then I would not hesitate to install an h-jamb as well (http://smile.amazon.com/Polycarbonate-Jamb-Hard-Degree-Glass/dp/B001G12TZQ/ref=pd_bxgy_60_2?ie=UTF8&refRID=0YWV6MKMT2YTW3EZS2S7). We are very happy. So happy, that we got a second sweep for the downstairs bathroom as well. Although, one word of caution; it appears that how tightly the sweep seals between the bottom of the door and the shower base ledge depends on how exactly hung the door was originally. Our basement sweep fits slightly more snug than our upstairs sweep because the door in the basement was hung just a fraction lower than the upstairs door. This make for a tighter seal, but it also make the door slightly more stubborn to open and close. Perhaps, with wear, the plastic will become less stiff and allow the door to swing more freely.

I was so hopeful for this. Our original seal that came with our shower years ago was seriously worn so wanted to get a new one. Everything with this looked right for our door. The 3/8 size, the style, etc. The only issue was this one was too long but I figured I could just cut it to size. When I received this one, it was extremely stiff so I had worries it wouldn’t create a nice flexible seal like it should, causing leakage. Sadly, didn’t even get that far because this claims to fit a 3/8 inch door but was way too big. It didn’t fit snuggly onto the door at all, just fell right off. Can’t even return it because I had to cut it down shorter to attempt to fit it. Thankfully this wasn’t a huge monetary set back but still disappointing.

Shower door sweeps are one of the most common items that I replace for my clients. If you have a glass shower door, you can bet that the sweep will start failing at about the two-year mark. When this happens, water will start leaking out on your floor, this is frustrating and, in some cases, can cause damage to the sub floor. These seals are easy to install, all you need is a sharp razor blade, some glass cleaner and a little time (maybe 10 minutes). Make sure to measure the thickness of the door so you can order the correct size needed (unless you have some off brand, budget grade door that the builder installed because they wanted to save a penny or two, see the "heading title"). The old sweep should slip off the door, downwards. It may take a little force because of calcium build up but will come off. Using the "new" sharp razor, BE CAREFUL, and shave the calcium debris off the door, then clean the glass so the new seal will slip into place. Make sure to install the sweep with the water diverter facing into the shower enclosure. The seal should fit snugly, and it may take a little force to get it place. Start from the hinge side of the door and work towards the outside edge. Once installed, you can use the razor blade to trim the seal to length, and you're done.

Installed it on bottom of glass door and now provides a very good seal at bottom of glass shower door. No water leakages any more. Great quality product! Would buy again!!

Fit my shower door like it should. And hasn't cracked in a couple of years

Product tore under normal use after just 3 weeks of use. Have contacted the company for a replacement unit, awaiting a response. Will update my review to share an update once they respond.

This bottom door seal worked perfectly for me. I cut it to length and slid it onto the bottom of the door and it provides an excellent seal. Perfect!

Se coloca fácilmente y se ajusta de manera exacta en el cristal de la puerta y además impide eficazmente que el agua se filtre y salga el agua. Excelente producto !!!