AKKON - For 06-08 BMW E90 3-Series 4 Doors Sedan Black Bezel Halogen Type [LED Halo] Ring Eye Lid Projector Headlights

I think they look awesome. But the first set were installed about a month and the driver side halo went out. So I thought it was probably a fluke and bout bought a 2nd set. I replaced the driver headlight and within a month the driver halo went out again. This isn't even my daily driver. The lights had barley been used within that month. I think they look awesome but taking the front clip off to replace the assembly is a pain. I recommend buying a different brand.

Edit: changed to 5 stars, not because of the headlights themselves, but because of the top notch service and support. I reported the problem, and seller sent a whole new set of headlights, no issues with those. Thanks for the great support! Build quality seems ok. the install process is straightforward. The connector worked perfectly. Problem is with the projector adjustment. the left side to be precise. After we installed the kit, on the first test, the low beam of both sides was low, with the left side being the worst offender. So I went and tried to adjust bot sides. Began with left side. It began to slowly rise (I DO like that the adjustment is precise, not blunt.). It slowly starts to go up... then it stopped. I assumed that was the highest setting, although it seemed odd that it was still lower than the right side. So I decided to match both, and then lowered the right side to match the left's height. Wento toa drive.... and the cutout is about 4 meters in the front of my car, clearly visible on the pavement! I mean, the fog lights aim higher than that! Went back, tried to re adjust it but it refuses to go higher (on the left side). Extremely dissapointed. Kinda hurts to throw $200 to the garbage.

Overall great product for the price the fitment was good and everything works as it should

I bought these as a replacement for my headlamps after a wreck destroyed the passenger one. The first bump in the road was that they did not come with low beam bulbs. The second bump in the road came when the driver's side lowbeam stopped working, and a bulb replacement and fuse replacement didn't fix it. The third bump in the road came when the passenger low beam EXPLODED in the assembly. The fourth and final bump came when I realized the entire layout of the assembly is different from OEM - I don't know too much about this stuff but I have discovered that the OEM low beam and hi beam are the same bulb with an extra filament that kicks in when the hi beams are activated. These, however, have a single halogen bulb. It's completely different and doesn't make any sense. I guess maybe I bought the wrong kind? But if so, I'm pissed that there was no way to know that. They've caused me nothing but problems since I got them. I'd love to return them, but I expect that the broken glass from the bulb that exploded makes that impossible. Who knows.

These headlight assemblies are fantastic for the price. Compared with a set of OEM headlight assemblies there is no noticeable difference in quality, while aesthetically the AKKON headlight assembly looks light years better than the OEM design even when they were new. As sun crazed as they are no there is no comparison. Some reviewers stated that these aren’t wired the same as the factory assemblies or are a different design than the factory and won’t work. This is patently false, they work perfectly and plug right in to the wiring harness. The only part of these they are NOT plug and play are the LED halo daytime running lights (DRLs). As the car didn’t probably have DRLs originally, of course they don’t plug in to a harness with no allowance for them. But they are easily spliced in at an expense of less than $10 at Autozone. The only detail not mentioned in the Amazon item listing is that the AKKON headlight assembly does not use all of the same bulbs as the factory assembly. If you intend to upgrade to LED bulbs at the same time you install the assembly you will need to know which bulbs the AKKON assembly requires. The AKKON assembly uses the same H7 low beam bulb as the stock headlight assembly uses, but it does not use a second H7 bulb for the high beam as Amazon states the factory assembly uses. The AKKON headlight assembly uses an H-1 for the high beam. And finally the turn signal /side marker bulb in the AKKON headlight assembly does not use the 194 bulb that the factory assembly uses. The AKKON headlight assembly uses the P21W amber light for the side marker/front turn signal as the stock assembly does. The bulbs required are: Low beam: H7 High Beam: H1 Turn signal / side marker: P21w Amber.

It does the job, bright stylish you can’t go wrong

As with others, I was skeptical at this price, I usually pay double this for replacement headlight assemblies. They install fairly easily, but you do need to remove the bumper. I have had these for about a month, been through the carwash a few times, and experienced pouring rain, no fogging. I also used Meguiar's headlight sealant to help preserve the clarity of the lights (helps prevent yellowing). They can be aimed, there are 2 8mm bolts sticking out the back of each housing, one is for vertical adjustment, and one for horizontal. I am using LED low beams and the pattern and output is very good. This is probably the best value I have found in aftermarket lights, in my 20 years of maintaining/modifying cars. The angel eyes do need to be wired, so I ordered miniature round switches, that I will put in my cigarette lighter cutout, to have manual control, from a stealth location. Overall, I am very happy with these lights, they are not difficult to install, even if you have not done this type of work before. I should have made a YT video for this, there are some out there, but none that I found were complete, but they will get you by if you need help. (Note - they aren't as streaky in person, my phone was stuck between night shot and standard mode)

To be fair, a 3 star for installation has nothing whatsoever to do with this product, it’s strictly a BMW design. Installation is not difficult but it’s tedious, requiring removal of the bumper cover. I am thrilled with this set! The cost for the pair was less than it would have cost me for a used single one at a junkyard. Pull yourself yards rarely have these cars and I needed it immediately for registration. Comparable quality with original BMW part. Perfect fit and they were properly aimed. Haven’t decided how I want the halos to work yet, but it’s an easy one wire splice. Comes with turn signal bulbs and standard halogen H1 bulbs for brights. Standard H7 for driving not included. Only wish included bulbs were LED.