UVPoxy Table Top Coating & Art Epoxy Resin Kit - 67.63 FL Oz / 2L: Fast-Curing, UV/Yellowing Resistant, Water-Clear, Bio-Based Resin | Self-Leveling, High-Gloss Epoxy for Table Tops & Arts

I’m not the type to ever write reviews .. but this is the best resin i’ve used to date. Its CRYSTAL clear and it adds a nice thick layer to my work. I was nervous at first because the resin without the hardener seemed super thick .. but I ended up LOVING the results in the end! 10/10 would recommend and seems like the only resin i’ll be using moving forward.

Used for my river table bar top after pouring with the deep pour . Worked great, just follow directions, mix very thoroughly and don't scrape out the last drops from bucket, just pour out. If you scrape out the mixing pail you may get some unmixed that will not properly set.

The media could not be loaded. I have been working professionally with resin for 4 years. I have tried many brands. I tried ecopoxy (deep pour version) for a project and really liked it, so I decided to give ecopoxy uvpoxy kit (for coating) a try. The instructions say that the ratio is 1:1 volume, and that you should mix for 2 minutes, the first time I used it, I mixed for 7 minutes because I still noticed that it had not blended well, I did not like the result, it was slightly sticky when touch. The next time I mixed it for 3 minutes (stick to the instructions) and, as you can see in the video, this piece of resin that I sampled from the last batch, cured for 48 hours, is definitely not what was expected, it is not the texture that the resin should have and cannot be used. My work was damaged, to fix it I will have to buy another brand and put it on top. I will not return to buy it. I do not recommend it. Be careful with your work.

I have been using Ecopoxy for months now on small projects and it is reliable, mixes well and has a long set-to-cure time. It does like 70+ degrees, and can be counted on to be workable for many hours after mixing, so be sure your project doesn't leak. Otherwise, 3 days later it is set and ready for finish sanding.

I used this for the my first resin project ever.And it turn out great the miss ups in it are my fault for first time but works so well. Just mix 50/50 and pour. I used powder color and still worked perfectly

Overall it's fine. It just seems to turn a little yellow after curing. I made sure I followed the directions and did several small batches but they all had a yellow tint to them. Not a problem if you're adding color but disappointed if you're looking for something clear.

Amazing results on a 1/2” pour without any shrinkage. Was a little concerned that the outside temp was too cold for good results, but it just took longer. In hindsight, I would’ve mixed the two elements together in a warmer atmosphere before applying outside.

This product mixed up to the consistency of rubber cement. I followed all the directions. It just does not flow well enough to do table top type work. It might work for other applications. I had to sand it all off after it set up and then use a different product. I have used other Eco Poxy products in the past that have worked fantastic but not this one.