HiLetgo 10pcs 4 Channels IIC I2C Logic Level Converter Bi-Directional 3.3V-5V Shifter Module for Arduino

It is working as intended. The board is compact, cleanly assembled, and reliable for prototyping. It has earned the five-star rating from me.

HiLetgo Logic Level Shifter Very pleased with these and other components from HiLetgo, work as expected and easily soldered onto an LCD I2C adapter to connect to Arduino Nano ESP32.

These are great if you plan to drive 168 x25 stepper motors from a 3.3 v cpu like an ESP32. 9/16/2023 I need to revise my review. I was unable to drive 168 x25 stepper motors with these converters. However they will work fine for data logic level conversion.

If you're working on projects with Arduino or any other small board, you'll find that you need to use a voltage shifter like this from time to time. I've only used a couple of these but when you need them they're very handy to have. The only thing about these is that there are 4 channels on each board and I have yet to use more than 2. But, at this price, it's more about the size of the board and the space it takes up than the cost of a 4-channel vs 2-channel LLC. As stated in the description - these are two-way. It can take a 3.3v supply up to 5v and can take a 5v supply down to 3.3v. If you don't mind doing the soldering yourself these are great. I typically won't solder the headers onto the boards and just directly solder wire to the terminals I'm going to use. True it's a more permanent solution but considering the low cost of these, the reduction in height by not using the pin headers, and my ability to brush up on my fine soldering skills, i'm very happy to use them this way.

I used these to attach Arduino Mega to Raspberry Pi5. They worked fine.

I've attached a simple schematic showing one channel of one of these boards. Each board contains four identical circuits using BSS138 MOSFETs. The ground pins are not connected to the circuit in any way and are not needed for it to function, a low level output is sinked through the corresponding input signal (MCU GPIO pin). A high level output is sourced through the corresponding Vin pin (LV or HV) through a 10k resistor. These have been working well in my experiments so far. I have one using two channels for I2C and two channels driving 5v logic-level power MOSFETS from a 3.3v microcontroller. Note that if an input is left floating, the corresponding output will go high. If using unidirectionally you can put a strong pull down resistor (1k) on the input side. A pull down on the output side will cause malfunction.

Not good for high frequency. Starts to experience significant rise times on high side after about 30 Khz, rendering many of my use cases void. Just absolutely does not work @ 1 MHz+.

As part of my Arduino hobby, I bought the HiLetgo 10pcs 4 Channels IIC I2C Logic Level Converter. It works great for safely connecting different voltage devices. Really handy and reliable — a must-have for anyone working on electronics projects!

Questo piccolissimo dispositivo viene impiegato per convertire e soprattutto stabilizzare corrente DC da 5V a 3.3V. Nel mio caso è stato utilizzato per stabilizzare il segnale di un modulo NodeMCU verso una strip LED digitale. Risolvendo tutti i problemi di instabilità precedenti, i quali rendevano praticamente inutilizzabile la strip LED. La confezione contiene 10 pezzi ad un costo davvero irrisorio. Ad ogni stabilizzatore andranno saldate le due spine da 6 pin, l'articolo è davvero piccolissimo, quindi per queste saldature c'è bisogno di un'ottima manualità, nella foto è posto vicino ad una moneta da 50 centesimi per dare l'idea di quanto sia piccolo questo componente.

Funciona muito bem e é fácil de implementar. Perfeito.

Used to link Raspberry Pi to xy-lpwm signal generator. Very compact and works very well.

ottimo

Faltaban pines en la bolsa y unos fallan