Air LiftWirelessOne 2nd Generation + EZ Mount On-Board Air Compressor with Mobile App - 25980EZ

So I bought this unit because its a bolt on kit and its a wireless control. I didn’t want to run a ton of wire in the cab, find a location to put in a switch and gauge, dill my dash, ect. These guys really had this figured out to make it a simple and as easy as possible.the unit works as advertised. It came with all the hardware to pretty much install it anywhere. I would say the hardest part was picking a location for it that isn’t going to stick out to far down past the frame. Couple of things I don’t like about this kit is the pre made harness doesn't come loomed, the ground wire for the compressor has to be bolted to the frame (I much rather have the ground wire be the same size as the power wire for the compressor so its a direct route back to the battery), and the compressor is kinda noisy. But all in all its seems to work fine I have a loaded truck and the unit filled the bags up fairly quickly. So I had to buy some loom but I'm happy with the purchase. let’s see what it does for longevity.

I purchased this to inflate and deflate my LoadLifter 7500 XL air bags. The EZ mount did make the installation much easier than it would have been if I had to drill holes into my truck frame. Running the airlines and power cable take longer than mounting the compressor. All in all, it was a very straight forward and easy installation. The supplied air filter on the air intake side has a snap fitting for a specific size hole that you drill in your frame. My frame thickness was such that I could not get the filter to snap in, and it kept falling out. I just relocated it to a hole on the compressor's EZ mount bracket and that worked perfectly.Pairing the remote control was also easy and straight forward as well as the android app they provide. Although the app shows the current pressure while inflating or deflating, it does not show the current pressure after that, but rather your set pressure. I would be nice to know both so that you can see if your actual pressure and your set pressure match. Other than that, I am very happy with the purchase. I enjoy the convenience of being able to adjust the pressure in my air bags based on road conditions from within my cab as I travel if needed.

Many times loading a truck or SUV the rear will sag and not only does this affect the ride but also changes the headlight aim. Leveling your tow vehicle will not only made the ride better but also allow your headlights to work correctly. This system does not increase your tow or haul amount. It simply allows it to be level. Installation is very easy as the company gives plenty of wire. It takes some time to find the right spot sometimes. Be sure to allow room for the breather. This one came with a remote and the ability to use Bluetooth and your phone. Simply download the APP. I have three settings pre programmed on my phone for quick reference. As for winter use, I have had this system installed on a truck that does not get garaged and is used often and have had no issues.

Couldn’t ask for a more compact and complete setup. Super easy to install.Very heavy duty frame

Easy installWorks as expected. Low noise level, keeps truck level as needed while driving

Not cheap, but after trying an overseas copy that did not work properly this is a no brainer. It is installed on the aft right frame of my F-250SD and the remote works with no issues form the drivers seat. The app also works with no issues and was very quick and easy to set up. It comes with good wire, although I just spliced it to the 12 gauge wire I already had run for the other compressor.I do wonder why a cover is not included with this compressor to help keep dirt and water off of it. It would seem that it would be pretty easy for Air Lift to design an inexpensive plastic cover. I may at least make a shield to place in front of it to give it a little protection.Not cheap but it works perfectly. Recommended.

Installed on a 2008 F350. Now that its installed it works great so far. No more reaching under the truck with a compressor hose and pressure gage to constantly adjust my suspension to match the load. I followed one reviewers recommendation to place it over the spare tire. I liked the thought of protecting it from the elements, but also I could not find anywhere suitable elsewhere. It either didn't quite fit, was too close to the drive shaft or exhaust, too exposed to the elements or impeding ground clearance. The U bolt did not fit anywhere and was completely worthless. Dropping the spare tire and drilling were required and changing the air filter wont be very easy. I ran the wiring in flexible conduit supported with zip ties, that was easy enough. Overall it took 3-4 hrs. to install, worth every minute for the convenience it will bring.