Question 1

will this work on intell LGA1700 chips

Accepted Answer

Yes, I am typing this response on a computer where a 38mm x 38mm Kryosheet is installed.   I even had to reinstall the cooler with no harm to the sheet or change in cooling.   Processor, i7-13700KF.   Cooler iQue H170i Elite.

Question 2

what size would be best for a gtx 1080ti?

Accepted Answer

The die size of the 1080ti is 471 mm², and the square root of that is 21.7cm which would be the height and width if it were a perfectly square die. However, the die shape of the 1080ti is roughly a 5:4 aspect ratio so, at minimum, you'd likely need the 25x25 size pad.

Do keep in mind that there are a bunch of SMDs around the die, so you may want to cover them with something since kryosheet is electrically conductive ("electricians bundling tape" is my current go-to solution as it's like electrical tape but is less permanent and doesn't leave behind any stickiness much like painter's tape).

Also, protip: a single drop of Isopropyl alcohol on the die and then placing the KryoSheet on top of it will help keep the KryoSheet in place when reattaching the CPU heatsink.

Question 3

7840u would fit with the 24x12mm?

Accepted Answer

Indeed it should. In fact, the die-size should be a bit to somewhat smaller even, leaving you with some "overhang" on the KryoSheet.

The die size of the 7840u is 178 mm², and the square root of that is 13.34cm which would be the height and width if it were a perfectly square die. However, the die shape of the 7840u is roughly a 10:7 aspect ratio, meaning the shorter axis should actually be less than the KryoSheet's 12mm width and therefore should fit without issue.

Do keep in mind that there are a few SMDs near the die so, depending on how much "overhang" there is, you may or may not want to cover them with something since KryoSheet is electrically conductive ("electricians bundling tape" is my current go-to solution as it's like electrical tape but is less permanent and doesn't leave behind any stickiness much like painter's tape).

Also, protip: a single drop of Isopropyl alcohol on the die and then placing the KryoSheet on top of it will help keep the KryoSheet in place when reattaching the CPU heatsink.

Question 4

Is this a single use item, or can you reuse it similar to the Thermal Grizzly Carbonaut pad?

Accepted Answer

It is a solid piece of carbon nanotubes, and it can be re-used. I have cut the sheets to size, and scissors did not ruin the material.

ASIN	B0C61Q77B6
Amazon 売れ筋ランキング	パソコン・周辺機器 - 54,009位 ( パソコン・周辺機器の売れ筋ランキングを見る ) シリコングリス - 94位
GTIN (Global Trade Identification Number)	04260711990830
おすすめ度	4.4 5つ星のうち4.4 (2,856) var
カラー	グレー
メーカー名	Thermal Grizzly
メーカー型番	TG-KS-24-12
ユニット数	1.0 個
付属品総数	1
冷却方法	Thermal
品目寸法（L x W x H）	33長さ x 33幅 mm
商品外装素材	カーボン。
型番	TG-KS-24-12

Thermal Grizzly サーマルグリズリー KryoSheet クライオシートグラフェンサーマルパッド (33x33x0.2mm) – 高い熱伝導率 [TG-KS-33-33]

Details

Details

Description

Specifications

Common Questions

Thermal Grizzly サーマルグリズリー KryoSheet クライオシート グラフェンサーマルパッド (33x33x0.2mm) – 高い熱伝導率 [TG-KS-33-33]

Details

Details

Description

Specifications

Common Questions

Thermal Grizzly サーマルグリズリー KryoSheet クライオシートグラフェンサーマルパッド (33x33x0.2mm) – 高い熱伝導率 [TG-KS-33-33]