Hon&Guan 8'' Soffit Exhaust Vent, 8 Inch Round Wall Vent Cover for Bathroom Office Home (ø200mm)

This is an easy item to install (finally an easy product) and it works like a charm!

These are pretty sturdy for being a plastic-type material, and they work as expected.

Good product, fit perfectly and work on my application just as it should have

It’s very Easy to install. Ít is working very well/(perfect) Price is very lower for what it does that well, 👍👍👍👍

Inner screen snapped in half first attempt at installing..replaced it with a piece of leftover screen i had from a window repair some time ago. Fixture fit perfectly in the hole as it should after making said hole with a 6” hole saw..one bump with the heel of my hand and it was installed and running like a swiss watch.

Used for exhaust fan vent works perfectly

Not actually 6 inch. More like 5.75

I needed a way to ventilate a small, cheap greenhouse with a poly cover and one door. I outlined the small end of the vent on cardboard which I then used to cut a 1/4 inch SMALLER circle. (So the vent would fit snugly when attached.) I then traced it onto the greenhouse plastic cover. I punched a small hole in the middle of the tracing using scissors then cut from the the middle out into what would look like a ‘plus’ sign, leaving the flaps attached. In between each previous cut, I made additional ones going toward the outside. (Like an asterisk.) So in the end, I had a 5 3/4 inch hole w a bunch of little flaps hanging off around it. The vent has 3 angled pieces of plastic on the part that would go on the inside. (Look at their provided pics closely) I am assuming is to help keep it attached to whatever it’s applied. I easily bent and broke them off. I then easily pushed the vent through and then from the inside, used GG Patch N Seal Waterproof Tape to hold the plastic flaps down and taped around the piece of the inside vent. If the flaps are a little too long, cut them down but leave enough to attach tape. I could’ve secured the vent from the the outside too w even more tape but chose not to so that it didn’t look too patchwork. This was so easy to install. I’m sure it would’ve been even nicer had I used something other tape to attach it but I didn’t have much choice. The inside screen should do a good job keeping bugs out too. I have absolutely no experience doing anything w tools, home repair, etc but installing this vent couldn’t have been easier. I’ve already ordered 3 more to add even more cross ventilation. (The clips were used simply to hold the greenhouse cover tight so I could apply the tape from the inside a bit more even. This was a job that had to be done completely alone. 😏

I decided to go with this vent because it's plastic. I think it will perform well in Quebec winters.

Fit perfectly. Arrived quickly. Couldn't find anything compatible or the right size in the local stores so I was skeptical about the quality and fitting prior to ordering, but was pleasantly surprised. So long as it doesn't melt when the furnace comes on, then it's all that's needed.

Made from very thin plastic, be careful

Fits 3 inch dryer hose. Need a wider diameter to fit in wall. I used 4 inch saw and it worked perfect.

Très satisfait