Creality Ender 3 V3 SE 3D Printer, 250mm/s Faster Print Speed CR Touch Auto Leveling Sprite Direct Extruder Dual Z-Axis Auto Filament Loading Ender 3 Upgrade 3D Printer Print Size 8.66x8.66x9.84 inch

The K2SE is an excellent printer for users who are still interested in learning and growing within the 3D-printing ecosystem, but who no longer want to spend the majority of their time troubleshooting basic hardware issues. While it may not be a flagship, top-tier machine by today’s standards, it represents a significant step forward—especially when compared side-by-side with older platforms like the Ender 3 Pro. Out of the box, the K2SE delivers a level of refinement that once required extensive upgrades on earlier printers. Features such as automatic bed leveling, filament runout detection, a sturdier frame with vibration-dampening feet, and a properly supported raised Z-axis bed all come standard. The addition of cloud access and a fluid web interface—complete with optional root access for advanced users—bridges the gap between a consumer-friendly machine and a system that still rewards technical curiosity. My first print, a simple Kirby model, was intentionally done with minimal tuning to get a baseline feel for the machine. The results were impressive, especially coming from years of compensating for aging components on my Ender 3. With that printer long overdue for a new extruder, I had grown accustomed to managing variables that simply don’t exist on the K2SE. The consistency and reliability here are immediately noticeable. Although I didn’t have the budget to add the multi-filament CRT system at launch, the printer’s upgrade path is clearly well thought out. Planned expansions like an enclosure, camera monitoring, and multi-material support make it easy to justify future investments. I would also welcome a firmware or hardware update that introduces Bowden extruder support, as it could further improve filament switching speeds and overall print performance. As someone who has stuck with the same Ender 3 since long before touchscreens, CR-Touch, and modern quality-of-life upgrades became commonplace, it’s refreshing to see Klipper remain a core component of the K2SE. For users who are on the fence about moving away from heavy DIY builds, this printer strikes a compelling balance—offering reliability and speed without sacrificing control. Perhaps the most underrated benefit is time savings. The K2SE is noticeably faster than older models, and its intuitive touchscreen interface makes it accessible even for non-technical users in my household. After setup, my wife and children can confidently start prints on their own, which speaks volumes about the usability of the system. Print quality alone justifies the upgrade for patient users. While some may find the stock cooling fans slightly underpowered, the machine compensates with excellent compatibility for multi-tool and threaded expansion systems—an advantage over many Bowden-dependent designs that require significant modification for production or multi-material workflows. And as a final bonus, despite being scheduled for February delivery, the K2SE arrived weeks early. Getting this machine ahead of schedule was the perfect way to confirm that the upgrade was absolutely worth it for the value price point.

TL;DR: A fantastic upgrade from older bed-slinger printers. Essentially a K1C without the camera or side panels — fast, accurate, and highly recommended. I upgraded from an Ender 3 V2 that had been giving me issues, and switching to the Creality K1 SE felt like magic — I was able to print my first job with zero manual setup. Everything from homing to auto leveling, nozzle cleaning, bed meshing, and input shaping worked right out of the box. I saw some reviews complaining about how to get prints onto the printer, but I had no issues at all. Using the stock firmware with Orca Slicer and connecting via local IP using Creality Print worked perfectly. One of the main reasons I chose this printer over others is that it's basically a K1C without the added extras (like the camera and side panels), offering the same build quality and performance. It’s also open in terms of firmware — no locked-down software or mandatory cloud printing if you don’t want it. You’re free to modify and customize as needed. So far, I’ve really enjoyed using the K1 SE. It's fantastic to be able to print without a hassle. I highly recommend it for anyone looking for a reliable, high-performance 3D printer at a reasonable price.

TL:DR - I like most of it. I purchased this to be my dedicated PLA printer so that my other enclosed 3D printer can be dedicated to the engineering plastics that need an enclosure like ABS and Nylon. I have had it for 5 days at the time of this review and have put 28 hours of print time on it. First Impression: The printer is "cute" compared to my two much larger Core-XY printers. It is smaller than what I am used to. Build quality is good and the design is pleasing to the eye. Fit and finish is good quality. It basically looks like a well-designed consumer appliance like a toaster oven. The frame has no flex, the belts are properly tensioned, the head movement is smooth. The accessory box is well thought out and organized. The mobile app and computer app works well enough. It is easy enough for an INTELIGENT child to use. Creality actually sends a quarter spool of filament with the machine, not a couple of feet. A freaking spool of filament! I was able to print two articulated dragons with the filament it came with. Setup: Setup was quick. Removed a few screws to that holds the bed in place during shipping, attach the spool holder, attach the touch screen. SET THE VOLTAGE TO 115v (US)<--- VERY IMPORTANT. Plug it in, Power it on. Go through the on-screen setup. Set up wifi. Install the app on my phone and my laptop. Sign up for Creality Cloud. Easy. Maybe 20 minutes for me. Prints: Print speed is fast. Head movement causes the entire machine to vibrate and I have noticed the entire machine moves a 2-3 mm from its starting position after it completes a 4-hour print. I 3D printed and glued "speed bumps" on the table so that the printer does not scoot itself off the table. Bed adhesion is good and first layer quality is great. The first layer is very smooth and even. I have had two failed prints due to poor bed adhesion, but I attribute that to bad slicing parameters, not the printer. Layer to layer quality is good. There is noticeable Ringing (AKA Ghosting) on the prints. That is disappointing because the printer went through an input shaping routine during setup. Input shaping is supposed to remove the ringing. This of course can be reduced by slowing the prints down. The Negatives: FIRST, My first attempt at sending a job from Orca Slicer to the K1 SE failed with errors. It seems that using Orca Slicer is not as easy as using the Creality Cloud app. A quick Google search is indicating that I may have to root the firmware to get seamless communication with Orca Slicer. If you are new to 3D printing and have no idea what I am talking about - this first negative can be ignored. But for me, my bigger machines talk to Orca Slicer. It would be nice to just use one slicer. SECOND, the printer is LOUD. It is mostly the print head’s fan sounding like a hair blow dryer or a small vacuum cleaner. It is possible to reduce the fan speed to lower the noise, but the design uses one fan to both cool the head and cool the part. I worry that if the fan is set too low, the print head would suffer from heat creep and clog. THIRD, the prints having ringing. The printer is sitting on a table with a 40 lbs cement base. The table is literally rock solid. With input shaping, there should be no resonance artifacts on the prints. The machine will need to be rooted to fix the firmware settings to remove the ringing. Or I can slow the prints down. FOURTH, Creality Cloud has a paid Premium. I am not sure if the artist and model designers who upload their 3d files into Creality Cloud gets a cut of that money. But something about it leaves a bad impression on me. Conclusion: Overall, the results are promising. As mentioned, this would be my dedicated PLA printer. It fits well for that purpose and this machine has a positive cost to features ratio. Hopefully, the machine has longevity. I have great plans for it.

Makkelijk te installeren. Zorg wel dat je als je alles weer in elkaar zet de x-as waterpas vast zet, dit voorkomt problemen met het bed.

Bra grejer

Die Teile sind alle passgenau und gut verarbeitet. Der Ein- bzw. Umbau ging gut von der Hand.

tout parfait, livraison rapide et soignée, conforme à la description 10/10 pour le vendeur

Muy bien presentado y muy buen funcionamiento, fácil de montar, se nota la calidad de la impresión