白光(HAKKO) ダイヤル式温度制御はんだこて FX600-02

温度設定できるハンダゴテ初めて買いました すごく便利 また、小手先が温まる時間がすごく速い オススメです

電源を入れてからの立ち上がりがとても早く、すぐに使えるのが便利です。パワーも十分で、作業中に物足りなさを感じることはありません。温度も安定していて、安心して使えます。 全体的に使いやすく、満足しています。

基板のはんだ付け用に、20年以上愛用したはんだごてを卒業して買ってみました。 加熱が早いのと、やはり温度調整は電子工作には必須機能ですね。ただあまり安くはないので、必要なければもっとシンプルなのでも十分と思います。これでコードレス版を出してくれたら最高なんですけどね〜。

単純な加熱コテに比べると、高額でした。しかし、その分、自動温度調整というのは、実に楽だと感じたので、良い製品と思われます。

流石の人気商品です。立ち上げ物凄く速いです。非常に握りやすく細かい作業も楽ちんです。温度調整も精度が高く、大変重宝しています。古いコテを使っている人はコチラに買い替えるとその素晴らしさに気が付きますよ！

温度立ち上がりの早さ、熱が奪われるマスが大きい対象も安心のパワー、設定温度に正確な制御、選択肢の多い別売りコテ先、部品供給に不安がない大手メーカー、軽量細身で持ちやすく持ち手が熱くなることもない、間違いない性能と安価の両立、迷ったらこれ！ クリアカラーに続き白光カラーも欲しくなって2本目です！

温度が可変で便利 白光製で安心 校正すると意外にズレてる

温度調節が出来て 綺麗に仕上がります。

I bought this soldering iron and I plugged it into the socket outlet which burnt out instantly. Unfortunately, nothing mentioned in the specifications regarding the voltage. It is only mentioned on the soldering iron itself. Despite that “Hakoo” is very good soldering iron brand, I put one star for the following reasons: 1. Noting mentioned in the specifications about the supply voltage. 2. I considered that all imported electrical items to UAE should be 220VAC.

I work as an aircraft component technician and Hakko is my new go to soldering iron after Weller went downhill in quality. This Hakko model is a fantastic soldering iron that is well made, quickly heats up to the desired heat setting and maintains it while working. This is something that is quite important when soldering so you can pick a desired heat setting so you won't over heat what you're working on. This is the Japanese version of the Hakko FX600 soldering iron which has a voltage rating of 100 volts, 50/60hz but will work in countries where the volage is 120 volts 60hz. There is a version of the Hakko FX600 which has a three prong cable(has grounding pin) but the internals are exactly the same. Based on reviews seen, the three pronged version is twice the price with a stiffer cable that a few individuals have complained to be an annoyance and a safety issue causing the iron to move around the work bench after placing it down or on a stand. The heating element quickly transfers heat inside the barrel into the tip. This is something of a marvel compared to other designs that are much less effective and efficient. You can change the tips by loosening the nut on the barrel and pulling out the tip replacing it with another. Just remember for this model FX600, the tips have to be the 18mm versions and not the 19mm which is for a similar looking Hakko soldering iron (which has a higher heating range). There is also more heating tip options for the Hakko FX600 versus the Hakko FX601. The FX600 is the iron you want to use for most soldering jobs. The Hakko FX601 is mainly for stained glass window fame soldering or more for heavier jobs that require a bit more heat. The cable on this soldering iron is quite flexible and important so that you aren't fighting against the cable but also so the iron doesn't start moving around on you workbench. Overall, I'm impressed with this model and as such purchased a few to have around.

Excelente cautín, en unos 20 segundos alcanza temperatura y su regulador ontegrado te da varias opciones camparado con otras opciones. Ya he comprado varios para uso en casa y la oficina, todos excelentes.

Je viens de le recevoir, je l'ai pas encore testé, je découvre qu'il a déjà été utilisé (voir la photo de l'embout), est-ce normal ??? Je laisserais un autre commentaire après l'utilisation, j'ai payé aussi cher pour avoir un produit tout neuf, je suis déçue 💔

Product looks genuine. Switched it on and all seemed to be ok: all lights where working and and handle was getting hotter and hotter, but even after 3 min tip was too cold to melt led wire for soldering. I even touched it and it was barely warm. I googled what could be an issue and immediately i found that most likely internal heat conductor is damaged or broken. I open it up and bingo - new item arrived with snapped internal heat conductor.