LaserPecker LP1 Plus レーザー彫刻機 小型 レーザー刻印機 超コンパクト DIY初心者向け 家庭用 わずか210gの軽量設計

普段はレビューをあまり書かないのですが、今回は本当に驚きました。これまで使用していた彫刻機は大きくて重かったのですが、この製品を受け取ったとき、そのコンパクトさに驚愕しました。彫刻機のレーザーヘッドは手のひらよりも小さく、ヘッドをスタンドに置いてケーブルを接続して電源を入れるだけで、すぐに使用可能です。この電動スタンドは折りたたみ式で非常に便利です。 早速使ってみましたが、ソフトウェアも非常に簡単で使いやすいです。ソフトを開いてBluetoothで接続し、彫刻したい文字を入力するだけで、彫刻が始まります。非常に簡単でありながら、彫刻は非常にクリアで、速度にも大変満足しています。私はこれをオフィスに持っていこうと考えていますが、まるでペットボトルの形なので、軽々と持ち運ぶことができます。こんなに小さくて軽いのに、革や布も彫刻できるのが驚きです。早くこれを使って、さらに多くの素材に彫刻してみたいと思います。

高かったけど、愛用してます♪金属の印刷が出来ないのが残念でした😢でもスマホで簡単に操作できてイラストや文字など印刷できて良かったです^ ^

比較的安価で入門機として充分満足できます。色々試しながら幅を広げる事で、もっと満足できると思います。

iPhoneのBluetoothに接続できず。何度か試しましたが、同じ状態だったので返品しました。 楽しみにしてたのに、残念、、、、

開封後、組み立て簡単、すぐに使えます。 アプリとの連動で何度かテストしある程度お試しを終えれば、かなりの精度で名入れできます。 木や革製品には特に相性良さそうです！ 使い込んでみます♪

トレーニング（5分くらい）を終了しないと使えないことを分かりやすく書いておいてもらいたかった。携帯の設定をいろいろ変えたりして、非常に無駄な時間を費やしてしまった。

レザークラフトをやってるため、思い切って購入。 操作は簡単。 最初勢いで作動させてうっかり付属のシートに穴が空いてしまった… よく考えてやれば問題なし。 オリジナル商品ができ楽しみが広がった。

文字や直線は綺麗に表現できますが，画像表現はできないと思った方が良いです。 グレースケールの表現もできません。 パソコンを使えませんが、白黒の単純印刷しかできないと思えば及第点です。 総合して、安くて使いやすい機器です。

I love my new Laser Pecker - Super! And so far it is worth every penny. My only criticism is I wish the fan would come on while engraving and turn off when the laser has finished. It even feels expensive. The support stand, when you unfold it, it feels like polished heavy metal. You know..substantial! The bump from basic to Super really shines with all the extra goodies that come with it. Like the auto focusing support stand with built in fan (just don’t loose that square distance measuring plate, lol), the protective case, and the magnetic eye protective shield that fits around the unit, when you don’t want to wear the safety glasses. And you still DEFINITELY need to protect your eyes. IT’S A LASER! The app is SUPER easy to use with a wifi connection and an e-mail account. I easily designed a simple logo on iMac Pages, air dropped it to my phone, zoomed in, took a screenshot, then loaded the screen shot from my photo album to the app, and lasered that logo on my leather. What’s really cool, and maybe some people wouldn’t agree, was the contact that was established with Laser Pecker Customer Service right off the bat. You know, registering your device, do you have any questions, what are your suggestions and feedback to the designers and engineers. Customer service replies really fast, they are understandable and friendly. I like that! With my leather business, @time.leather.co on Instagram, I had been wrestling with myself on which tool to mark my logo on my products. A branding iron, stamp, foil, or laser engraver. My favorite part about this whole experience has been the freedom of design for branding my leather goods. I can change the size of my symbol to compliment the product, or add monogrammed initials for a customer. It’s freeing! I highly recommend this laser engraver for it’s size, portability, cost, and fun in creating!

First, before anything else, we had some pretty mixed expectations in regards to this little guy. So much that our team was evenly split. However, actual opinions (come time) began to swiftly lean into the direction of "impressed". For one, this little LaserPecker is quite costly. Especially, when you have full-out machines that cost around the same price that can cover a larger area. However, they do not compare to the user-friendliness of this one. Some of those machines are like using a 3D printer in ways (some others, a little easier than that). This little LaserPecker, however, is the easiest of them all, and by far, the most portable. Assuming the app works at least. Looking into some of the reviews for the app, we were initially a bit worried. It doesn't have the best rep. However (a lot of howevers in this review), the app seems to work just fine outside a small hiccup. Our small hiccup involved registration as the code wouldn't send out to our mail server. So we switched to Gmail and received it (finding out that they send confirmation codes from a generic domain that was likely blocked by our server due to known spam issues in the past). In the end, though, we got the code and we were able to continue using it. It WOULD be nice not to have to do that though. Since everything is managed locally from the app, we felt that any kind of confirmation codes or registration was unneeded. If anything, do a normal user/pass scenario and be done with it, but only if you have a community of art or something to go with it. Else, an account shouldn't be needed. As long as this paragraph might be, we didn't experience much trouble with it, so no stars taken. That little tidbit aside, we were able to get the app to work and were able to engrave a number of things, and had quite a lot of fun doing so. The wait time isn't so bad for the smaller stuff (branding of small logos and text on leatherwear and the sort). Especially, compared to something like a 3D printer. So you will find yourself "burning" (literally) through a lot of things as you have fun trying it out on various surfaces. However, when you go a little deeper and larger (especially with wood), the math suddenly changes. A 100mm x 100mm flower on wood (100% laser, 100% depth) we did for someone took 723 minutes (that was a little painful). So it shines best with small branding and the sort. Leather works quite well with this unit, as well as paper, cardboard, and simple plastics. Smartphone cases that feature durable plastic may take a number of runs to get a crisp enough result. We wound up using an old beat-up case as practice and ran it under it about 5 times before we were happy (each time, upping the laser or depth more and more until we hit 100% laser and 60% depth and called it good. The only thing we had a problem with was the feet, which should be dipped in rubber or cover with rubber caps of some sort. The long flower print we did featured a portion of the flower chopped off since the tripod of the laser slid ever so slightly. Likely due to the curvature of the surface it was on. The feet of the tripod are plastic, so there isn't really any grip to help keep it steady. Sometimes, it's the simple things that wind up mattering a lot. The app is quite user-friendly and as long as it doesn't experience any of the issues before mentioned (by other people than ourselves), we would say that it has plenty of potential as they expand on it. So far, we absolutely love it. **If you have found our review helpful, please vote it as helpful below so we know. This helps us to provide quality feedback in the future.

استعمله وجيد في الكتابه على الورق والجلد روعه جداااااااا انصح به 👌

What can I say, I love this thing. Makes me wonder why it took me so long to buy a laser engraver. I was waffling between this one and another brand but I went with this one because it was compact and portable. As long as you have a power supply, you can engrave pretty much anywhere. I use the engraver with the Apple App on my iPhone. I've not tried the Windows app. So far, I've been engraving wood and leather goods for my Winery and the results are very nice and professional looking. I've found that it will use bitmap and jpeg files that are in my phone's photo album. Honestly, the biggest challenge I have is getting my artwork from my computer to my phone's album. I just email them to myself. I did want to engrave drinking horns and discovered that the laser just reflects off of the light colored horns without even making a mark. The solution, I found, was to cover the horn with painters tape first and then engrave. I had to turn the depth up pretty high but it engraved nicely after that. You can see the one horn cup I engraved in one of my pictures. I'm guessing this method will work for other items that are too reflective for the engraver. I really do love this engraver and only have a few complaints. These are the things I think could be improved. First, the App interface is white and orange text which is nearly impossible to see with the safety glasses on. Black text in the option buttons would have been better. Second, there are too many verification popups in the App while in use. When you want to engrave, you have to tap four times, which is three times too many. Yeah, I get that you want to remind users to be safe and check the distance between engraver and material, but maybe make that go away after a tutorial. I get sort of annoyed that I have to tap so many times just to repeat a previous job. Third, the default preview setting is so dim, no one can possible see it. You have to immediately turn the brightness up to see a preview. Maybe make the brightest setting the default. Fourth, I thought it had a battery that needed charging. It does not. It has to stay plugged in while in use and the cord that comes with it is not very long. If you use an extension cord, be careful that the cord does not move the unit while in use. I found that my one cord had a heavy end that, if it slipped off the table, would take the engraver, tripod and all, with it. I have a USB Ryobi battery adapter that I found works just fine if I am going to be out and about at markets and shows and need to do some impromptu engraving. My only regret is that I didn't spend more to get the one with the base that rotates cylinders (for engraving mugs). But that may be a future purchase. I don't know the lifespan of this laser and have only been using it for a couple of days, so I guess only time will tell how durable it is.

I was looking for a laser printer to help add names to products in my small business. I primarily will use text and this item works perfectly for my needs. . I do not have much room and wanted something on a budget price. I purchased the LaserPecker Pro because I like the storage case, the safety shield, and the accessories that are included. The laser sets up easily. It is controlled by the app, which is thoughtfully designed and easy to navigate. It is very straightforward. I am happy with my purchase and definitely recommend it. It is great for beginners, is easy to use, and is a good value for the price.