CRC Extreme Duty Open Gear and Chain Lube- 12 wt. oz.

WD 40 seems to be my go to however it wasn't really working for more than a day on the boat lift. This lube is tacky and kind of penetrating and foaming at the same time. It has lasted all summer.

This is the real deal, have been trying too find a lube that will not fling off a gearbox that has an input of 17K rpm and an output of 2K. Have tried motorcycle chain lubes, other brand name open gear lubes and the best up to this CRC lube was a Dupont dry lube -only issues with this dry stuff was noisy. Now using this CRC lube, applied buy spraying into a container then using a small brush to coat the gears. The spray application is kinda messy for my purpose of lubing a gearbox that is smaller then your hand. Easily cleans with brake cleaner and rag. I found after applying with brush, spin the gearbox very slowly to ensure proper distribution then allowing to set over night (smells petroleum like) to set-up, works like a charm! It may set-up quicker but never checked. This lube will add a little friction vs a dry lube as it is very sticky but will make straight-cut gears gears whisper quite.

Unlike most people here I use this on the bottom of my vehicles in place of fluid film. Where fluid film doesn’t last very long, this does the trick. Ordered six cans and coated the bottom of the truck. I can say this is a fantastic product because it kept the salt and water from rotting the vehicle with ease, after a few coats you can just leave it there, as it’s very difficult to remove, even the elements have little affect on it

I don't use it for it intended use, I spray it as undercoating on all my vehicles in September before winter, main ingredient is 'asphalt', have a 2008 HHR that lived in New England it whole life, its has no rust and hardware is easier to remove when needs to. 2 cans do a vehicle, 3 for full size truck

I had a can of black Lubriplate open gear lube for several years and this is just like that; black, nasty, sticky, bubbly, penetrating, waterproof grease. I had the can of Lubriplate for several years because a little goes a long, long way and lasts a long long time. If you get it on your clothes NOTHING will get it out, not even lacquer thinner, lighter fluid, Oxyclean or Dawn. Spray carefully and use a back up rag and some disposable vinyl gloves unless you really don't care about the over spray. However, if you have linkages, ball sockets, gear racks or chain drives on lawn and garden, farm equipment or whatever that need truly waterproof, long lasting, high pressure lubrication, this will do a really good job. This is a strong lube that sticks in place unbelievably well. I gave it four stars only because it doesn't have a spray tip that will accept a spray straw. It's even more messy because of that. I'll find some kind of replacement nozzle eventually.

Exactly as stated on can

This product works very well arrived well packaged and on time. I would definitely buy again.

As described