Pressure Washer Foam Cannon, Additional Orifice Nozzle 1.1mm | Adjustable Snow Foam Lance for Car Wash, 1/4 Inch Quick Connect, 1.5 Liter

I’ve had this foam cannon for quite a few years now so I feel I can post a good review. I have recommended this one to a few friends over the years. It has never caused me any problems. I haven’t used other foam cannons for comparison. The ability to change the concentration of the soap/foam density is a cool feature and has always worked as it should. I like the adjustable spray pattern size as well. It makes foaming from a distance really easy and surprisingly accurate. I’ve used it with both my gas 3100 psi 2.5 gpm pressure washer and smaller 1800 psi electric pressure washers. It works well with both. I have always cleaned it out and run with fresh water through it after use. I like the large soap reservoir. The only downside is it can be heavy at the end of the wand when full. The holding tank is thick and seems very sturdy. The top part of the cannon is made from thick brass and is well built. Overall I give it a 5/5 and would 100% recommend this foam cannon to anyone.

I recently purchased a 3000psi electric pressure washer, so I wanted to try out a foam cannon to wash my vehicles. Some pros on YouTube suggested putting a smaller orifice in your foam cannon for better results. I purchased this foam cannon because it comes with one. I installed the smaller orifice and turned down the adjustment knob and filled up with a mixture of Meguiar's Gold and water. I was not disappointed. Lays down a thick layer of foam just like I wanted. Used it several times with excellent results and no issues. Really speeds up the process of washing vehicles. Spay pattern is adjustable, but I leave it on a wider setting all the time. Always rinse out container and run clean water through when finished.

Overall, this is a decent foam cannon. It works well with my 1800psi electric pressure washer. I picked this version for a few specific reasons and they all worked out. I wanted the large base so it wouldn’t tip over, which is valuable compared to my old narrow bottom rounded version. I also liked the opaque bottle so I could write on it to remind me the correct amount of soap. Things that don’t quite work well: The bottle has marks for measuring but they are meaningless. I had to measure 500ml and 1000ml and mark the bottle. The shape of the bottle, especially when wet and soapy, makes it hard to hold onto. I’ve had it slip out of my grip. The filter at the end of the pickup tube is nice, but it’s not a weight and it seems the pickup tube is always away from the low point of the bottle. Makes using the last little bit difficult. Not the worst issue, but just be aware. All this said, it’s a good price point and it makes foam. I calculate panel impact ratio for product, and measure soap to the ml. This probably makes me on the edge of a typical user….which makes my comments probably more critical than average. I’ve also never used a $100+ foam canon with an expensive high flow pressure washer, so I don’t know how this compares to that experience. I’ve only ever used $30 foam canons with 1800 1.5gpm pressure washers.

I recently purchased the Tool Daily Pressure Washer Foam Cannon for my car wash routine, and I couldn't be happier with the results! This foam cannon has completely elevated my car washing experience. The foam it produces is thick and luxurious, clinging effortlessly to the surface of my car and effectively lifting away dirt and grime without any need for harsh scrubbing. One of the standout features of this foam cannon is the additional orifice nozzle, which allows for a customized foam density to suit different cleaning needs. The 1.1mm orifice nozzle provided a perfect balance of foam thickness for my car, leaving it gleaming after each wash. I was also impressed by the build quality of the foam cannon. It feels sturdy and well-made, able to withstand the rigors of regular use without any signs of wear or deterioration. Using this foam cannon has truly made car washing a breeze. Not only does it save me time and effort, but it also delivers professional-level results that make my car look like it just rolled off the showroom floor. I would highly recommend the Tool Daily Pressure Washer Foam Cannon to anyone looking to take their car washing game to the next level!

Worked exactly as stated. Very good quality.

Update 4-12-19: Still enjoying the foam cannon. My one complaint is that the capacity isn't as claimed. I measured it and could only fit 52 oz, which is 1.5L, not the 2L claimed all over the post. I've contacted the seller to see what they say. There is even a question that's listed above the reviews asking about the capacity. It doesn't affect the function, just seems weird why the volume is so much less than advertised. I'll update if the seller says anything different, but still a 5 star foam cannon. Original Post: Ordered this foam cannon after seeing a bunch of youtube videos claiming the need for the 1.1mm orifice for their foam gun. Since this included both the 1.25mm and 1.1mm, I figured I'd be set for any pressure washer. I picked up this along with a SunJoe SPX3000 (2030 psi, 1.76 GPM). Together, they are a great combo. I'm sure a gas pressure washer would put out more foam, but this put out a generous amount with about 4 oz soap in the bottle. Changing the orifice required a 16mm wrench (odd size, but I did have it). I'm sure there's a US equivalent sized wrench that would work as well. I filled the bottle full and used most of it per car I washed (we did 2 today). I was being very generous and spraying everywhere for fun, so I'm sure the bottle could last 2 mid sized cars if you wanted to save on soap. Overall, great product. Adjustments are easy and cleanup was simple. Just make sure you've got a half way decent pressure washer to pair with any foam cannon, otherwise, you may be a bit disappointed. This almost eliminates the need for a soap wash bucket since there was so much soap on the car (a rinse bucket would suffice for me). Great price and I'd recommend!

Have used it several times and seems good. I use it with an electric pressure washer so I did put in the smaller orifice that it comes with. I get really good foam that way. I would buy this again

The foam cannon is ok. It's built with good brass and seemingly good rigid plastic. For the most part it's pretty straightforward on how to use it. Now comes the catches; For starters there's indication anywhere on what type of spray you'll get based on how the adjust the opening of cannon. It has a knob that adjust the flow of soap.... Which is good, except it won't stop turning so you dont really know where you have it set to. It has good potential, but I'd save my money and buy something from either chemical guys or by the mfg of your pressure washer.

I just bought and used this cannon. It worked amazing. I had some gel car soap and mixed it with warm water and suds galore came out. Very impressed with it. Comes with 2 hoses and 2 orifices for different psi. Mine is a 3200psi and I didn't have to change it. Seems like a solid unit, just remember to rinse the jug and run some clean water through it so soap doesn't gum it up. Buy it!!

La uso per lavare auto e moto. Faccio prelavaggio e anche lavaggio. Ottima Schiuma.

Excellent product worth the money

Très bonne qualité, je recommande

Works absolutely as it should, really foamy, nice quality, got some weight to the nozzle which feels really nice. Highly recommended.