Cruise Control Switch 84632-34011 Compatible with Toyota Camry Corolla Highlander RAV4 Matrix Tundra compatible with Lexus Yaris Scion

Super easy install. Worked perfectly in my 2014 Toyota Corolla L. Look up videos but the process was a snap. It did take some time figuring out how the airbag pins release but easily a 5 min job once you know what you're doing.1. Disconnect negative battery terminal (do not skip this)2. Remove plastic cover for cruise control on bottom right of steering wheel (you will need to drill a hole in it or get another cover with a boot Toyota OEM Part 45186-02310-C0)3. Use a flat head screw driver to push in release pins to remove airbag housing in the center through holes on sides and bottom of steering wheel. Videos were helpful in locating/figuring out how they worked, unlock the steering wheel with the key to help rotate it in better position4. Put the airbag on the top of the steering wheel, no need to disconnect the wires5. Connect included wire to stalk and plug in spot at the top of the wheel6. Snake the cruise control stalk through the steering wheel and out hole and screw in the included screws7.Pop back in the airbag and make sure it's secure the reconnect the negative battery terminal8. Enjoy being able to cruise effortlessly down the road. Truly a blessing.

The cruise control on my '09 Tacoma quit working. I had seen videos on YouTube on how to replace the switch but was hesitant to try a replacement on my own. After seeing the price on this switch I decided to give it a try. I disconnected the Pos battery cable and followed the video instructions. It turned out to be very easy to do and took me about 20 minutes. I used the original plug and it fit the new switch perfectly. After putting it back together and reconnecting the battery I started the truck and hit the cruise on button and was very please to see the little green light on the dash that said "cruise" which my old switch no longer did. A test drive showed that it worked as well as the original. I am very please.

Replaced in my 2011 Lexus RX450h. Installation was not hard, but I was a little nervous working around the airbag. Disconnected the negative 12v battery terminal, waited about 10 minutes, did the install, tried it out, worked great. Only been in for about a half hour, so don't know about durability, but price was great.

This was a perfect fit. It's an easy job and only took about 10 min to install.And, the cruise worked immediately

Like many people, my OEM cruise control stick "popped open" and wouldn't got back together. I've been driving without cruise control for some time thinking that it would be a $100+ fix. When we scheduled a road trip, I decided to go ahead and replace. I was pleased to find this product at a great price and hoped that the quality would be similar to the OEM. It was easy to install (although the instructions were somewhat vague) using a youtube video, it took less that 10 minutes to be back up and running. If the product holds up, it will be awesome... it feels and weighs about the same at the OEM and feels solid.

Based on a review I read for this part, I bought it for a 2006 Sienna, though Sienna not listed. I purchased this part, rather than one for Sienna, because this part had better reviews and appears to not have as long a stem. The fix is easy. The easiest way to replace this part is find yourself a video you can watch on how to do it. I can't post a url to one because of Amazon's terms, but there are a lot of helps out there, though it can be a "Jungle." It took me 10 minutes to replace this switch. The wire that comes with it won't fit at the steering wheel end, but all you have to do is unplug the old switch and plug in the new. This switch IS a bit shorter which is good because less chance of breaking off again. It works perfectly. If I had known I could pick up the part and do the R&R in 10 min...I'd have fixed it two years ago!

This was very easy to install, but it did not perform like it was supposed to. It does t always come on when you press to turn it on. When it is on, it doesn’t always engage the cruise control. And when it does engage, sometime it will cause my car to accelerate until I press the brake pedal. It’s scary and defective. This is the second one I’ve installed. I tried to give it another chance when the first one wouldn’t engage.

I noticed my 2008 Camry cruise control stopped working and that little push button was popped out. One video found on YouTube indicated that the cruise control switch issue. I found this one and it fixed the problem!Just a note mentioned on the video, NEED to disconnect car battery first!!! Before doing anything. The replacement should be very quick.