SUNSEEKER 16" Hedge Trimmer Attachment Universal, Dual Action Articulating,Heavy Duty Steel Material, 12 Angle Positon

For the price, this is a great after market hedge trimmer and l bought two of them. One fit perfectly on my Husqvarna gas trimmer with no modification. I have Echo trimmers as well (and as other users have stated) the hedge trimmer shaft does need some slimming to fit the Echo shaft. For residential use, you can't beat this product. I've also bought the pole saw attachment from this same company and it works great as well, again fitting my Husqvarna perfectly. A few things to know about the hedge trimmer: you have to keep the cutting blades lubricated during use or they will get too hot and stop working. I've found chain saw bar oil works well. More importantly is not exceeding the cutting capacity of the trimmer, which max is pencil width foilage. Doing so will bind the cutters and shut it down, so don't force it. The cutting head is equipped with grease zerks. While the unit has grease in it, l recommend adding some. Same holds true with the pole saw. I ran the hedge trimmer hard over the course of 3 days on a big job, and after figuring out the issues above, it performed flawlessly. My only con would be (as others have stated) is the weight of the cutter head. I am 6'3" and a physically fit 230 lbs, but this thing had my shoulders and biceps burning after a couple hours. Because the cutter head weight weighs more than the power head of the trimmer, it makes the machine unbalanced. This forces you to continually muscle up the cutter head. This sounds like a bigger complaint than it is because the performance outweighs any negatives, just man up and get the job done. It's just something to be aware if you're a weakling. I'm not sure of long term reliability, but it's already lasted a season and paid for itself after the first hour. This unit will likely not stand up to commercial use but for home use (as long as the tool is not abused) l highly recommend this trimmer.

Ordered this to fit a 10 amp Ryobi expand- it model because of price and extra pole reach. Two other choices were said to be brand specific and not fit. This snaps right into place when the square drive system is aligned. Based on a dry run in the garage because it arrived when raining, the trimmer ran well and is an upgrade for me. There is a little assembly required as you can see from the pic showing the product just out of the box. It was easy to adjust the angle with the adjuster. There are two grease fittings on the metal housing for future maintenance. The housing is not magnetic, probably light weight aluminum. The drive shaft was apparently well greased and the blade oiled. This trimmer is kind of heavy on the long reach. Trimmed overgrowing crabapple and a small maple. Did notice larger branches not being able to get into the trimming action due to a fast blade speed. A stop and start let those branches get into the blades to be cut. This thing did the job! For storing I would have liked a way for the trimmer part to fold down to the extension.

I bought this item because I have a lot of overgrowth to cut back. I have a Stihl HS-45 gas powered trimmer but as it is hand held and it would be too much bending and reaching to use. I honestly didn't know if any pole trimmer was going to do what I was going to ask anyway so I didn't want to spend $300-$500 on a Stihl or Husqvarna. I think I paid about $80 for this one. It did come in a box bearing a different brand name on it. I think it came as a "badger". I don't know how much the power head you are using comes into play but for reference, I am using this on a Ryobi Expand it power head. Obviously, my Stihl trimmer cuts thicker material with much less effort but I was pleasantly surprised how well this unit performed. I have seen reviews stating it is heavy. Well, put anything on the end of a four foot pole and it will get heavy sooner or later. It is certainly not unwieldy. I found myself cutting in 15-20 minute bursts. This was not because it was tiring to use, that's just the way my days went using it. This thing performed extremely well on weed grasses, vines and even pencil thick branches. It struggled a little with thicker stuff but did manage to cut through it. I had seen reviews stating the head gets hot after running it for a while. I haven't noticed that but I have been hitting the cutting head with WD-40 or PB Blaster before each use (like the directions say). I Do find the cutter head loosens from bar and needs to be tightened up a little. I put threadlock on it and keep an Alan key with me and haven't found it to be a real problem. Speaking of the cutting head, super easy to change the cutting position. Easy to change position 1 handed with no tools. I found myself using it much like a string trimmer cutting low to the ground by positioning the cutter head parallel to the ground. What a treat for my back. If you're a pro or super big brand loyal, of course you will have negative things to say about this product but I have been using (and abusing) this thing on my own property and on a farm with 15 years of overgrowth and creep to it. I wouldn't hesitate to buy this product again in a heartbeat. It has already saved my money, my back, my time and my energy. For $80, I'll take that all day long.

This had to be a return. I mounted this unit on to my power head. Everything was aligned as it should be. Started the head and to my surprise was that the blade did not move. After hitting the throttle a few times the blade started to move a little. Not much. Coming out of where the blade comes out of the gear case was blue grease. Sticky grease like marine or bearing grease. I opened the gear case and it was packed sold with the sticky grease. No wonder why nothing was moving. You could tell it had been opened because the gasket was out of position and split. I scraped out what I could of the blue grease and reassembled the bottom plate. It is now 11:00pm so could not start the powerhead do to neighbors would be happy with me. So I am not sure if removing what seamed like a heaping tablespoons of sticky grease helped. Will find out tomorrow. We will see, hopefully it will run as it should. Unit looks like it is built well. I started the powerhead the next morning and it ran fine. So it was all that sticky grease that held everything back. Next step would have used non flammable brake cleaner and removed all the grease and replace with white lithium grease.

Though a bit on the heavy side, it works great. I originally bought this attachment to reach the top of my corner shrubs at my house. They are as tall as the roof line of the house and I couldn't reach the top any more with a ladder. While the trimmer did a great job being able to adjust the angle to the pole, I got lazy and just started to trim the rest of the lower shrubs with this thing. I just straightened out the trimmer angle and stood back 3 feet or so from the shrubs that are about waist high and started sweeping back and forth over top at the level I wanted. Because of being back some, instead of being right on top of the hedge, I could judge how level I was cutting and the hedge came out beautiful. I guess my other hedge trimmer is going to be relegated to trimming the honey suckle vines on the back fence. Hey it looks like this never got posted and I came back to do an update, so here it is. I guess it's been three years since I bought this hedge trimmer, and I killed it today. This has been a good tool and I abuse it. Sometimes I'd put against a branch an inch or better in diameter and let it ware it's way through until it's thin enough to get a bite on. Well, that kind of wore it out and finally stripped the gears in the head, but it did it many times. I probably should have gotten my chain saw and trimmed those branches. Anyway, this trimmer worked very well, and I will be getting another one, so I'm sticking with my 5 star rating. If used reasonably this tool will probably last as long as your power head, and if not, it will give a few years of service. Anyone know where I could get a new set of gears?

I ordered this attachment to replace my Ryobi one that had a damaged shaft. I use the attachments on my Kobalt battery powered tool. I also have grass trimmer, tiller, and edger that I use with this tool as well. My Ryobi never fit perfect into this tool but all of my others do. The attachment came in on schedule and was pretty much as advertised. It is multi-angle and gives you a lot of extra reach that I didn't have with my Ryobi. I used it to cut one of my larger bushes and the tool cut fine but was a little heavy reaching out with everything fully extended. Nothing I can't handle but it would be a problem if I had to do it for a couple of hours. The reason I gave this a 3 star rating was what happened after I had finished. When I went to remove the attachment from my tool - the shaft stayed in my tool and the metal sleeve just came off. When I inspected everything - I discovered that unlike every other attachment tool that I have - there is no stopper attached to the shaft to stop the shaft from easily coming out of the sleeve. Because there was no stopper - the firm grip my tool had on the shaft meant there was no way for me to separate the two without going into my shed to get a pair of pliers. With the pair of pliers - I was able to get the shaft to release without issue - but now I have to always carry around extra tools when I want to use this. If they had simply put a stopper on the shaft - everything would have been fine. I will need to look to see if I can add my own stopper - but unless there is something to stop against - that won't be of any value. With all the grease - I was not able to see anything to stop against. With that being said - my gut tells me that this is cheaply made and is probably not going to last - but I will give it a few more tries to see.

I knew that this was going to need to be modified to work with my Echo PAS powerhead, but I figured it was so much cheaper than the Echo version, I'd give it a try. The shaft is larger, so I used an angle grinder and flat file to take down the shaft until it would slide into the Echo shaft. I also had to mark and drill the alignment hole about 90 degrees from where it was on this unit. Once I got it installed, I thought it seemed weak. I figured I'd lube it up and try anyway. I lubed each bottom tooth with STA-BIL Blade Guard and ran it to work the lube in, and went to town on the brush in the forest around the family cabin. It worked amazingly well. I was totally shocked at how well it cut, and the size of the brush it could handle. It would chop through any stiff brush, and even small trees that were able to fit between the teeth in the blade. I re-lubed it about every 30 minutes or so, and ran it for about six hours straight. I really didn't expect it to hold up, but it did. Usually when I go cheap, I regret it, but this time I didn't. I was really shocked that this unit was able to be adjusted to an angle that worked at ground level to cut the brush down. I saw someone else say that they were missing a bolt on theirs. I also thought I was, but it was under the flap in the box. I had to look twice before I found it. It was just boucing around in the box, so I guess that wasn't the best packaging on their part. Other than that, I am really happy with how it worked out.

I’m giving this four stars only because I have not used it as of yet. However the four stars might remain for fit, let me explain. I own a Stihl KM 91r, I wanted an attachment for trimming since my dedicated one finally died beyond repair, I did not want to spend the outrageous price for a Stihl one. So I ordered this which actually fits however there are a few drawbacks. First is the head is not designed to fold over on itself (if you know professional products you understand why) next is the angle orientation, it is not parallel to engine, I am now running handlebars so we will see.

No llevo mucho tiempo probándolo pero funciona bien con una máquina de 26cc marca senix. La extensión es compatible mas no está hecha a la medida. Ambos usan un tubo de 1 pulgada y encastran bien. Corta ramitas no muy gruesas. Anexo imágenes para que se den una idea y les sirva para orientarse en su compra. Pensaba comprar una de marca Stihl a batería pero vale unas 9 veces lo que este accesorio. Si, quizá funcione mucho mejor pero por el precio está decente el funcionamiento. Lo que sí siento que como ya mi máquina trae una extensión, con este accesorio queda aún más largo y pesado. Ya el tiempo dirá cuando bueno sale el accesorio pero se siente de buena calidad por el peso.

as this was available on line and a universal fit and a lot $60 cheaper than what I had on offer from the big green shed. The attachment arrived hear in Australia from the USA it looked like from Texas originally. it was a box inside a box the trimmer was in two pieces so you need a Allen key to putt head unit onto the pole. As you can see in vid it clicked into my ryobi and hole lined up ( no modification needed) The trimmer appears to be well reinforced and dose a good job cutting very happy with it and was well worth the wait getting it shipped here

I used it on a Greenworks 80v trimmer. Works well. Cut about 150 Ft of 12 foot Hedges. No problem. For the price, you can't beat it. Oil the blades every 20 minutes or so. That's usual practice for all hedgers. It can use a quick sharpening but no complaints. So 4.5 stars.

Muy bien

j'ai acheter cet attachement pour mon coupe bordure Troy-Bilt (shaft carré) l'attachement ce connecte et s’adapte parfaitement. Par contre avec l'extension et la tete du coupe haie, cela ajoute du poids et pour une utilisation long cela peut etre fatigant pour les bras. Pour la qualité.... c'est fabriqué en chine... mais pour l'assemblage et le fonctionnement je ne vois aucune problem jusqu'a date. bien huiler les lames avant et apres chaque utilisation avec du FLUID FILM. et apres un 15-20h d'utilisation je pense ouvrir et verifier la graise dans le gearbox et m'assurer que cet attachement va durer longtemps. Plusieurs model existe (trimmerPlus) par contre il offre moins de porté pour couper en hauteur. En somme, je suis satisfait, (qualité pour utiliser autour de la maison)