HeyClear UV Resin kit 300g Premixed UV Epoxy Resin Glue Cure for Crafts

I was purchasing the smaller 100 gram bottles of UV resin,300 grams at a time,but it goes pretty quickly when you are using it everyday.It just made sense to buy in bulk and this was a very fair price for the quantity.HeyClear resin is a brand I have used and the quality is spot on with no surprises.It dries crystal clear and looks gorgeous.You can avoid bubbling by taking the proper precautions-the biggest mistake people make that causes bubbling,is stirring too quickly and then not allowing a proper outgas for a few minutes.You can even cut bubbling down by picking up the resin in its mixing/pouring container and gently dropping it back onto your work surface-obviously container and all-a few times.Then let it rest for a few minutes and your bubbling will be almost non-existent.Drying time is better than average,but I suggest running a second cycle under the UV light to make sure the middle/center is dry enough.I have had great results with alcohol inks,pigments,glitters and other additives.Just follow the one sixth rule(no more than a sixth of the resin quantity) when you add colors,etc and you'll have no problems with brittle or weak epoxy.There is no odor to speak of really,but to be safe,make sure you are in a ventilated area.I will definitely use HeyClear products again,the quality is always there and I can feel confident when I sell or gift my creations.

This UV resin is wonderful. I use it to create as well as finish coat. It is very clear and I don't have a lot of issues with bubbles. This is my new go to UV resin. I will continue to purchase this brand because the price is on point for a quality product.

I jabe ordered many different brands and types of UV acrylic and 2 part epoxy style acrylic.... with out a doubt, this brand "HeyClear" has been the best so far. I take into account the bubbles, working time in low light, setting time, viscosity, shrinkage (😆🤣😆), stickiness after setting, and how well the different types of mica Pigments (metal flake, pearlescent, UV glow, sparkly, and the basic colors; several btands) mix in. I couldn't be happier as I have ordered and used all of the lowest price brands available thru amazon, walmart and shein. If u are looking to save money yet use a quality product this is the one. Theres no stickiness after setting. Errant edges sand easily. Theres a very low bubble content, they ALL have some bubbles, its unavoidable. It sets very fast in direct sun light and good quality UV light. I seem to get almost 4x the time to work with it to mix colors, pour into the mold, and remove bubbles in the vacuum chamber than any 2 part ive used (have half a gallon left of a 2 part im saving for back-up cuz any of them give you only a few minutes working time, ridiculous). It sets super fast once exposed to a 50 or 55 watt UV light (designed for use with screen printing UV inks)... even the larger and thicker molds that are completely sealed with no bare liquid exposed, with absolutely ZERO stickiness left behind, just perfect always!!! All of mica pigments mix completely and thoroughly, even the cheap ones ive had clumping issues with in the past, there are no spots/areas on the bottom of the mold where poorly mixed pigment has settled which ive dealt with in the past given shorter working time from other brands, generally I mix colors IN the mold eith a toothpick (if its long enough) because they create less bubbles; (I also sand off the toothpick points to avoid those lines they will create in the mold that can be seen on the surface of the finished product). I use a few yellow (low UV lightbulbs while working (more visible light than red darkroom bulbs)..... it took me a while to realize that all lightbulbs give off enough UV to slowly set the acrylic 😆🤣😂.

Great for beginner or veteran crafters. Crystal clear, hardens quickly. Is prone to producing bubbles near end of bottle but is typically of handheld size squeeze bottles.

This item is a relief. Thin, but not runny. Very few air bubbles, low fumes, and cured quickly and hard. The last resin I purchased was awful. I did not have high hopes. I dread trying this but I was so pleasantlg surprised. This is exactly what I was looking for. Wonderful results.

I have to say that I was surprised about how this resin worked. The best thing is that there's no smell. I always wear a mask, but there was no foul or lingering odor. On that, it should get a 5 star, for mostly all resins have a bad odor. But, I only gave a 4, for the shine wasn't as bright as I'd like it to be. Plus, it took mine longer than 90 seconds to cure. Some of my molds took 3-4 times of me having to keep pushing the button before it'd cure. I also had to flip each piece over before they set hard. My molds weren't very deep, and my machine is new. This resin did take colors well, along with confetti. It's just the right consistency; not too thin, not too thick, but I don't feel that it's a good doming resin. Overall, this is a pretty good UV Resin, and for the price for 100 grams is really a good price. Plus, it's a safer, good resin to use; especially since I have asthma. I will continue to buy and experiment with it, but I'll also keep trying other UV Resins also.

If you been wanting to get into rasin this is a great way for beginners. Very easy to use and add mica powder for color changing make a beautiful creations.

A good resin. Sets fast with a UV lamp or Sun. I would buy it again

ho fatto dei piccoli lavoretti da neofita con questa resina e ha soddisfatto le mie esigenze. Bassa odorosità, Facile da lavorare

Ayant testé d’autres résines UV, celle-ci est de loin la meilleure, épaisse mais pas trop, s'applique tres facilement, et ne colle surtout pas apres séchage. Je recommande

J'ai essayé plusieurs sortes de résine uv et je trouve que celle-ci est la meilleure. Elle est facile à manipuler, très liquide et elle durcit bien. Par contre, il faut prendre le temps de bien la sécher pendant plusieurs minutes avec une bonne lampe uv.

ممتاز واصلي

Das Resin kommt gut verpackt in einem kleinen Karton. Die Dosieraufsetze liegen mit bei. Das Resin ist sehr klar und lässt sich gut verarbeiten. Mit einer UV-Lampe ist es fix ausgehärtet.