Camp Chef Leg Levelers Fits Most Stoves and Camp Tables, (4-Pack), Black

I bought these leg levelers to install on the leg extensions for an Explorer 14 inch two burner stove. They are good quality and are very useful to level the stove on uneven ground. That being said, there are two challenges in removing the original installed leg caps and then inserting the replacement levelers.The instructions simply say to remove the old ones and install the new ones. Simple enough on paper but there is always a hard way and an easy way to do things. I wish the instructions provided a bit more insight into how to go about that.Both the original caps and the replacement levelers are a very tight fit into the leg tubes; very tight. I initially tried to pry the original cap off with a screwdriver but they are not just a cap, they have some length, enough to make them a very tight fit. Consequently I had to put the tip of the screwdriver under the cap lip and using a hammer, tap it in many places until enough of the cap was out of the tube so that you could grab it by hand and kind of wrestle it out the remainder of the way. A lot more effort than needed.I have an old axiom that when you are trying to do something that looks simple, should be simple but is either not working or seems unreasonably difficult, you are probably doing it wrong. Here's the easy way. Maybe somebody else figured it out, but it bears repeating anyway.Get a fat round stick about 3 feet long, stick it into the other end of the leg tube about 18 inches or so from the end cap and give it a good healthy shove. I used a long piece of round wooden dowel stock about 1 7/8" in diameter and 30 inches long, but a broom handle would probably work equally well. The cap will pop off effortlessly. I removed the end caps on the remaining three legs in about 20 seconds. Dirt simple.Now about inserting the levelers, that's another challenge. I attempted to hammer in the first leveler, and it was not going in easily, and probably should not have as you want a very tight fit but in this case there is a difference between a tight fit and no fit at all. The problem is that the inside of the leg tube end has a very sharp 90 degree edge that wanted to scrape off the plastic of the levelers, acting like a knife. Hence the reason it would not go in without risking damaging it by brute-forcing it with a hammer, which is unnecessary.I beveled the inside edge of the leg tubes with a small rattail file to remove that sharp edge; it took less than a minute to do each leg. I then coated each leveler with a bit of lubricant and lined it up square to the tube and it only took a few good whacks with a hammer to install it without feeling like I was about to destroy the leveler. And the result was a very, very tight fit, as desired.So there you have it - good product that keeps your stove level on rough ground. If you want to easily remove the original caps and install the levelers into the leg extensions, try what I discovered.

Glad I got these, because the FedeEx driver that delivered the Camp Chef gas stove I got these for must have used the stove as a football on the way here. Thee was more tape on there than the Nixon White House. (Sorry millennials. Read a book.) To be fair, Camp Chef came through and offered to replace it for me, but none of the damage affected the performance and that would’ve taken time I didn’t have. They sent me a nice spatula set for free. Good people. Can’t say the same for FedEx. Anyway, these legs came in handy because I had to replace two of the plastic caps on the legs, which were pushed in and broken during delivery. Simple install: just take a rubber mallet and bang them in. They’re adjustable to about 2-3”. Should work fine. Very pricey.

I love these. I have the 3-burner Expedition that comes with the BBQ box. These fit perfectly and were super easy to install. I am very happy to be finished with the days of trying to level my stove by moving it around a ton and using bark or rocks to get it close. I haven't actually used these yet, but my Dad bought them for his. He has an older 2-burner stove (I couldn't tell you what model). His legs were skinnier so these feet did not fit into them. But even without installing them correctly, they worked great for leveling his stove. We just inserted them as best we could, and the bottom of the leg sat flush against the flat surface of the nut. He has to store them loose because they won't press into the legs, but they are still functional. Since these fit perfectly into mine, I fully expect them to work great.The only complaint I have is that I had to buy them separately. Camp Chef should just make them standard!

If you are a camp chef you know your griddle needs to be leveled just right. An omelette should not run of the griddle, but burger drippings should. That's what I like about these legs: You can adjust your portable cook stove so your cooking is on the level, in a manner of speaking. No camp- ground is "graded" perfectly and this is why these legs are so marvelous. The issue of uneven terrain is solved with adjustable legs. The legs are perfectly made and slide in for a snug fit. These legs are the best complement to your Camp Chef cook stove and if you life to use the griddle, they make cooking become magical. I highly recommend this product to insure your cooking experience is the best it can be. Would be a great gift for dad if he forgot (or just overlooked it).

These are sturdy, and easy to use. I installed all four in about 2 minutes. They adjust very easily, and makes any surface work for the Camp Chef Expedition 3X I have them installed on.Really though, the price is pretty high for a few pieces of molded nylon. I guess Camp Chef must not sell many if the prices are this high. Still, I would buy them again if I had another stove that needed them.

Worked very well

I like the product as it solves the issue of leveling out the grill with a griddle on it. Forget trying to find the right spot or looking for makeshift shims. It was easy to install, use and had a reasonable height adjustment. Now I can adjust the level and make sure liquids stay or go where they need to go (eggs).

These solve one of the biggest problems with my Camp Chef 3-burner stove, especially when using the 2-burner griddle. They make it easy to level my stove (or rather slightly tilt it forward so the grease runs into the grease trap). No more turning the stove around for 10 minutes trying to find the right placement to do the same thing. No more looking for pieces of bark or stones that leave your stove wobbly. Just remove the existing plastic end caps, pop these in, and your camping life instantly becomes easier. It works great on hard surfaces as well.