ORICO 40Gbps M.2 NVMe SSD Enclosure with Built-in Cooling Fan, Tool-Free Installation Aluminum NVMe Case, Support 2230 2242 2260 2280(M Key), Compatible with Thunderbolt 3/4 USB4/3.2/3.1/3.0/2.0

Velicidades perfectas y lo mejor de todo es que caben los ssd con disipador que era lo que yo buscaba ya que todas las que habia probado anteriormente eran grandes pero no cerraban las tapas. La gente remarcaba que hacia ruido el ventilador pero yo no escucho nada 0 ruidos.

E' il secondo che acquisto; raggiunge facilmente velocità superiori ai 3,5 mb x secondo. E' dotato di una ventola, abbastanza silenziosa.

Tolles Gerät – schnell und mit großem Speicher. Sehr zu empfehlen, besonders für Leute, die sich mit Fotografie beschäftigen.

Isinma yapmıyor kullanışli ama pahalı bir urun ucuz olsaydı 10 numara olurdu.

I Bought this Product for USB4 speeds with full fallback support. It uses an ASM2464PD Chip which supports every USB Mode! So USB4 or Fallback to every subsequent mode (Multi-Modal). Alot of units only drop to USB 3.2 Gen 2 which is 10Gbps, ie. 1000MBs. This supports 2.0 @ 540Mbps, 3.0(3.1,3.2 Gen1) @ 5Gbps, 3.2 Gen2 @ 10Gbps, 3.2 Gen2x2 @ 20Gbps, & USB4 @ 40Gbps and supports PCI-E Passthrough. I also wanted to use this for the pass through function. Which allows PCI-E cards to be connected to USB4 supported PCs. I tested 3 NVME drives on this including the one in the pictures. you lose bandwidth for pci-e 3.0 devices connected so try to only use pci-e 4.0 devices for best performance. Also tested with a 1050 GPU with special adapter lol. Worked flawlessly and was also funny to see it was safe to remove my Nvidia Geforce 1050 device haha. when I used eject feature. The chip can get very hot, the device came with a 2mm thermal pad on the chipset but there is no contact to the case. Not sure why they even put a pad on it? Maybe it helps a little?? So I installed 2 Copper Shims and a thermal pad the gap is approx 5mm from the case to the chip die. Stacking 2-1.5mm Copper shims and 1-1.5mm Thermal pad including the ultra thin thermal tape i have to hold the shims together and to the case was more than enough. During a 1-hour stress test on a GPU and NVME the case becomes warm to the touch but never throttled the speeds. Fan always runs so be aware. I want to buy 1-2 more of these for the future, very simple and easy to modify if you need more cooling or heatsinks. But overall was a great product and will buy again. Lets see how long the support chips last hopefully a long while. Cheers all!