AQUALONA Aquacapri Shower Column, Square Rainfall Shower Head + 5 Spray Handset, Easy Installation, Chrome, 92 x 15 x 16 cm (AQUALONA Aquacapri Shower Column)

For just under £60 this unit is really good . Very easy to install to the old single shower riser so no drilling was needed in my case . The look of it is probably the best out there & I looked at many & not just via Amazon . The only part which I found fiddly was the small nuts on the pipe holder brackets . Make sure you put the plug in your bath or cover the shower tray as they only supply 4 & any lost it would be a pain to get more . This was the hardest part but I managed it easy enough with another pair of helpful hands . I didn’t want two large hanging water hoses getting tangled up to use as the main feed from the Mira shower unit to the overhead pipe so I decided to use a Flexible Hose 1/2" x 1/2" x 300mm £2:45 purchased from screw fix . That is the small hose you can see pictured that comes from my existing Mira shower install . The width of my above the bath shower is tight & the only other option was to off set the overhead water feed pipework but this wouldn’t have worked as it wouldn’t have been central when stood in the bath . The screw fix flexi hose gave me the ability to keep it central to the wall space / bath. . Yes it would be better without it but much better than another shower hose dangling down & helps with the water pressure as there is less length for the water to travel through. If fitting to a bath mixer tap then obviously this wouldn’t work & you would need the hose . Make sure you use all the rubber 0 rings in the connections as it will spring leaks if forgot . I used an extra 0 rubber washer in both ends of the Flexible Hose 1/2" x 1/2" x 300mm & also used PTFE Tape 12m x 12mm on the threads . Including all the joints inc the water facet heads . PTFE tape cost 28p from screw fix which for a sure water tight seal on everything why not . If you are looking to replace a single use shower or bath tap to shower to this then I’m sure you can’t go wrong it works great & is very simple to install.

Initially I was a little apprehensive about buying this as it was my first ever DIY install. However, this was a very easy shower to install. Yes, it was a little fiddly in parts, but I wanted to install this into previous holes, and it worked perfectly. Once I got over the initial fiddly screws, the instructions were simple to follow, and I had the shower installed in 15 minutes. One point to note is that you may need an extra "hose" to connect the shower to the tap, as the one supplied may be a little small, but luckily I had a spare that I could swap in easily. All items are supplied. I have had this product for a couple of months now and it is working perfectly. The overhead shower provides good pressure (although this is down to your tap) and it feels great to shower in, no leakages.

Works well and is good enough for the price. It was Straight forward to fit and will do the job fine. Fittings are mostly plastic and poles were much shorter than my previous shower. If you're looking for metal poles and fittings etc .. you'll need to pay a fair bit more. Overall pretty happy with it for what I paid.

Well built-designed with clear printed instructions made installation straightforward. There is also a video by QR code to help you, should you need it. A number of parts are chromed plastic but seem durable enough. Well pleased and unit works well.

I was looking for a rainfall shower for my wet room project and didn’t want to remove the expensive mixer i already had. This connects directly to the thermostatic mixer outlet and has a small dial for switching between rain and shower head. Installation is easy and the attachments encompass the Main shower bar. Recommend you have decent drill bits for tile’s so you can get a decent hold for the brackets. I didn’t use the plastic tray also provided as it didn’t have any holes so would collect soap and scum over time. Rainfall is great and wide enough to enjoy the experience. Would purchase again and recommend to others looking for a way to update an old shower head with something sturdy and quality built

It looks ok and while I didn’t really have an issue putting it up, I think there is the potential to be problematic for some people. The brackets are fiddly with the nut being at the rear and you need to put your finger on the back to stop this being pushed out. It feels quite cheap tbh but looks good when up and no problems using it.

Bought this to add rain shower option to existing 10.5 KW electric shower. Relatively easy to fit and lightweight too, just little bit fiddly when fastening the riser pipe onto the brackets with the tiny nuts and plastic inserts - I blocked plughole to stop anything disappearing 🙄 Easy to understand instructions and still decent pressure even with the extra bits of pipework and no leaks at all. The little metal valve which switches between the heads, feels sturdy and tight too Would recommend this if you're looking to upgrade shower 👍🏻👍🏻

Bit flimsy but works and easy to install. No leaks yet and so far so good and looks the part.

Es bonito y para lo que cuesta está bien.