【2026 Upgraded】 USB 2.0 A Male to 2 Dual USB Female Jack Y Splitter Hub Power Cord Extension Adapter Cable (Not Supporting CarPlay and Android Auto)

I bought a pair of LED lights that charge using USB cables. I keep them out in the garage where USB ports are at a premium, and I wanted to be able to charge both lights from a single port. This was the cheapest, easiest solution. If you buy this to charge 2 devices in parallel, keep in mind that you'll be at the mercy of how much current your USB port can put out. You won't magically double the current output, so devices in parallel will charge slower. I haven't tried using this for data so no idea if it will work for that or not. You're on your own there. However, if you need to charge 2 devices at once, this will get the job done for minimal cost.

works for me

Great product, exactly as pictured and described, no issues or concerns

I'm totally blind. I got this to be able to run two ceiling fans off of one USB port. Note! If you do this for any device, you need to make sure your USB brick can handle the load. In my case, I ahve a few USB ceiling fans in one room. The USB brick only had so many ports. In this case, the USB brick is 20W at 5V but only had 2 ports. I have at least 3 fans I wanted to run off of this brick. So I got this to see if it would do the job and it does. I was running two fans and they did OK. So I plugged in one of these splitter and then plugged two fans into it and had the 3rd one on the 2nd port of hte Brick. The 3 fans ran at full speed. When I tried plugging in a 2nd splitter on the 2nd port of the brck and then had 2 fans plugged into that! I noticed that all the fans slowed down some being they got louder and that happens when they run at a lower speed. Whenever I would unplug one of the fans didn't matter what splitter I unplugged the fan from! The remaining 3 would speed back up and become quieter. So that told me the splitter was OK; Just that the brick couldn't really take the load with 4 fans running, but did great with 3 USB ceiling fans running. The 2nd splitter I will keep being I plan on getting some more of the USB ceiling fans and have another USB brick for that project. So for how I'm using this splitter it is working as it should. Each USB fan pulls 1A at 5V. So with 3 fans running on the brick it is pulling 3A for a total of 15W give or take a little. That is for only USB ports on the brick. So make sure you brick can handle the load and I would say don't overload the splitter. No idea what each leg of the splitter is rated at. 1A at 5V looks to be OK for a total of 2A or 10W.

Good

Nice tight connections! Good look. Nicky pliable.

Fast ship, well packaged, exactly as described — I would buy again! The 2026 Upgraded USB 2.0 A Male to 2 Dual USB Female Jack Y Splitter Hub Power Cord Extension Adapter Cable works well. I’m using it for an LED ring light and my printer with no printing problems. Good quality, priced right. Highly satisfied and recommended!

This review is based on my usage scenario and includes valuable troubleshooting steps to help others. tl;dr: Cheap molded Y splitter. I cannot recommend this splitter and I have contacted Amazon customer service to have Amazon review this item’s ability to damage equipment and create a fire risk. — I purchased this splitter to drive 2 140mm cabinet fans off a receiver’s rear USB port. The USB port has an output spec of 5v with max output of 500mA. The 2 fans combined power requirements leave 150 mA headroom. This splitter was barely used for 5 minutes since its delivery August 16th. The first thing I noticed was the build quality of the cable: Cheap molded plastic. This evening the fans stopped working. I had no power from the rear USB port on my receiver. My USB port tester showed no output. Thinking the rear USB port was dead, I brought the receiver to my workbench and all a sudden the USB port started outputting voltage again. I plugged the fan into the rear USB port and the fan powered on. I unplugged the fan and plugged the USB tester in. Plugged the Y splitter into the tester and the tester shut off. According to Ai assistance, the Y splitter has shorted, bridging 5V to ground. Both the receiver and the tester detected the short and shutdown in order to protect against an overload. At this point, the Y splitter is bad. IMPORTANT - FIRE RISK The fans worked when they were used with the Y splitter plugged into a “dumb” wall charger. The charger did not care and continued to pass dangerous current. This is a fire risk. I cannot recommend this splitter and I have contacted Amazon customer service to have Amazon review this item’s ability to damage equipment and create a fire risk.

Both ports are not compatible with USB data. I received one port only for power and another port for both power and data, which I already had.

Funktioniert sehr gut Genau wie ich es wollte Sehr gut

Fonctionne très bien

Works running two devices on one usb port

It works great just fantastic