waveshare7inch Capacitive Touch Screen LCD (H) with Case, Compatible with Raspberry Pi 5/4B/3B/Zero/Zero W/Zero 2W/Pico/Pico W/Pico WH, 1024×600, HDMI, IPS

Using this as a third screen for my limited space PC setup. I especially use it for work. It can also be used as a stream deck or a good way to hold all your icons and leave your other screens free. The functions are endless really. Wouldn't recommend using it for videos though using it with spotify or something similar is cool because you can have your playlist out of the way of work or streaming or whatever. Display is decent but it has its limits. Might have to do some tweaking with colors depending on what settings you have on your system but I find it works phenomenally for my uses. Also, mounting is a bit of a chore but I recommend finding a smaller table mount of some sore and using that just take into consideration the cords on the right side of the device. I mounted it to my center pole that has my monitors mounted to it as I have them mounted fairly low but the pole goes a bit above them so there is room. I used the DHYSTAR Tablet mount holder. If you but that holder, use normal cords and not 90 degree cords. It will fit perfectly with the cords going directly through the gap. The only bad part is accessing the buttons on the side though, if you fix your settings before mounting, it shouldn't be an issue. 5 stars. Buy this thing.

The screen and image are great, no complaints at all. But there are some quirks your should be aware about if your planning on buying this.1. When there is nothing plugged into the screen, the screen will turn off and on repeatedly, until something is plugged in.2. When I plugged this into my 2016 13inch macbook pro (usb c to micro usb to power the screen, and usb c to hdmi for video) it overloaded my macbook and it shut down, and I wasn't able to turn it back on for almost an hour (scared the crap out of me). I dunno what caused it, but not gonna do that again.3. The built in stand is crap. it only has one angle and it isn't adjustable, only one angle. And the angle is at about 45 degrees so you have to be pretty close to it in order to see it dead on if your using it on a table.out of those 3 quirks the only one that really bothers me, is the stand. I wish they included either a tripod mount on the bottom or back, or a vesa mount. I solved this by just putting velcro on the back. If they sold a newer version of the same exact monitor but with a mounting option i would buy it in a heartbeat

I have a setup where my home PC and work laptop share a main monitor. The home PC is a desktop, and I wanted to be able to still control music or whatnot when my work laptop had control of the main monitor. I figured I'd risk this for the price, and was amazed at just how great this is! It set up without needing any special effort, my Windows 10 PC recognized everything and it worked right off the bat. The touchscreen didn't work at the start, but I googled calibrating a touchscreen and found how to activate it (the touchscreen turned out to not need any calibration). Anyway, I've used it all week and wish I'd done this sooner!

For a long time I've been searching for a small touch screen display for one of my projects that runs on a Windows mini pc. I bought a couple other 7 inch displays that claims that worked with Windows but I could never get the touch screen to work. This one worked right of the box no drivers, no calibration. Good quality, good resolution, Great little display.

This showed a raspberry pi device in one of the pics and it said "with case" so I thought it meant the pi could go inside the case.There's no real case for this. It's basically a mediocre screen with a plastic surround to make it more of a monitor but nothing like what I had expected.I found it by searching "raspberry pi touch screen with case" or something similar so a lot of the blame on it being nowhere near what I expected was probably amazons. I should have spent more attention to the pics and maybe I'd have seen that the ports on the side of the "monitor" didn't match up to a raspberry pi's ports.

Great image sharpness when outputting the right resolution. The color looks a bit washed out to me. It won't operate unless enough power goes to it, so be sure you have enough voltage and amperage from your power supply. It seems to power just fine using the data line with enough power.

I use this as a monitor for computers that are in vehicles, are usually mounted in the trunk, and don't have easily accessible ports besides one USB and one HDMI. This monitor is powered over USB-A to Micro USB and a full size HDMI port. The included cables are 1 foot and includes one HDMI cable and one Micro USB cable. This allows you to view the device but if you desire to use touch you will need to provide a second Micro USB cable to plug into the touch port.I would not expect exceptional picture quality from a 7 inch monitor but it is passable.

This has worked very well for the purpose I bought it for.. I thought I would use the touch screen option, but I didn’t. I am using the hdmi out from my 3090 to run this, and it is amazing as a monitor for pc. I would definitely recommend it if you are looking for an external screen. You can probably mount it on the inside of the pc, but I would rather have it in front. I wanted to flip it because my Pc is on the right side, but the back stand doesn’t allow for it.. so the cables go from left to right.

Perfect for multitasking or when i'm playing valorant and I put my zoom call on it. Its really handy to mute and unmute in class on a fly while in game.

J'ai beaucoup hésité mais je ne suis pas déçu malgrès quelque inconvénient qui me sont propre !l’écran est assez bien de bonne qualité, le boitier et bien fini.On pourra selon les besoins regretter l'absence de petit haut parleur intégré au boitier.Le tactile est très réactif est extrêmement précis, sous Windows avec une résolution de 1920x1080 les icônes sont tout petit et pourtant le tactile ne tape jamais à coté, même dans les menus la sélection se fait parfaitement .les seuls inconvénients est le temps d'allumage une fois branché le microsystème est lent à se charger prés de 5 seconde avant d'avoir l'affichage.Autre inconvénient, mon ancien écran de la même marque a les prises coté droit et il si on met un connecteur hdmi coudé il est a 270°, donc câble partant vers l’arrière, or avec cet écran le câble part vers l'avant, il faut donc un câble a 90° .

Esta muy bien. Los cables quizá algo cortos.He comprado unos a 90 grados más largos y perfecto.No me gusta que si quieres que sea táctil tenga que ser la pantalla principal. Desconozco si habrá forma de hacerlo táctil de otra manera

perfect , working and no damage

Der kleine 7" Monitor mit Touch Bedienung erwies sich als besser wie erwartet. Die 1024 x 600 Bildpunkte Auflösung sehen ordentlich aus. Er kommt auch Auflösungen in HD 1920x1080 zurecht. Am Schreibtisch habe ich das Gerät getestet. Betrieben wird es seitdem an meinem mini Homeserver. Hier hatte ich bisher einen Stecker der einen Monitor simuliert. Da es manchmal aber bedingt durch z.B. Updates notwendig werden kann den mini PC direkt per Touch Screen zu bedienen ist dieses Gerät optimal für mich. Da ich den Server normalerweise vom Smartphone oder einem anderen PC aus steuere und hier die volle HD Auflösung von 1920x1080 von Vorteil ist war es schön dass der kleine Touch Screen damit auch zurecht kommt. Theoretisch hat er auch ein deutsches Menü, da hier die Übersetzung etwas holperig ist habe ich es bei Englisch belassen. Kontrast, Helligkeit und Sättigung lassen sich natürlich einstellen.Insgesamt bin ich bisher sehr zufrieden mit dem Gerät. Natürlich ist die Bildqualität nicht vergleichbar mit einem 500 EUR Monitor aber für den Preis und meinen Einsatzzweck vollkommen OK.