Antec Flux Pro Full-Tower E-ATX PC Case, 6 PWM Fans Included, White

As my title says. The space you get in this case is literally insane. The case is not that big either, they just know where to put panels and how to size things appropriately. The case has the best build quality I've ever seen as well! All panels are thick and high quality! All screws are great quality as well. All panels use snap fittings and they keep things in place well; I have no doubt they will hold up. The side panel is tempered but not tinted (this is a huge deal as the side glass almost doesn't even look like it is there!) The case is super easy to work with, and I had zero issues fitting my water cooling stuff in there. It really feels cavernous inside but it isn't that big for a full tower case. The fans are high quality as well, and you pay for them! The bottom 2 fans are amazing. They push so much air into the case even at low rpm! It is basically as though they are pulling air with no restrictions... I need to get some more of those for my other cases. Temperatures are great! I have never had lower temperatures. Did I mention the thing is almost dead silent with fans at 900 rpm? I also have absolutely no scratches or imperfections anywhere!? The price is great! You get 6 Noctua level fans worth at least 90 bucks (I would know: I own many of them), the perfect case layout, wood (mine has tasteful yellowish wood on the white model), tempered side glass, tool-less entree, a buncha high quality left over fasteners, fits anything you wanna put in it, basically every single thing but the kitchen sink in terms of cases is included. Just buy it already lol

My first real computer build in a while. I recently built an identical one to this for a client. I liked it so much that I went out and got one for myself. This has to be the closest thing to a perfect case ever. Mostly tool-less for opening up and snapping back together. You will need a screwdriver and some tools to put in a board, cooling and any additional fans. As you can see I went over the top on this one with a Asus Dark Hero MoBo and Super 4080 graphics card. Particularly nice was this case being white, they have a dark one as well but was out of stock and I ended up liking this better anyway. Very clean look. Now for the particulars: Build quality - Absolutely the finest I have seen in a case. No sharp metal, everything very well engineered. Attention to detail in every aspect. Plus plenty of screws and parts for every possible build. Aesthetics - Top notch, this case looks nice, clean lines, tastefully appointed and trimmed in real wood. Interior - Designed by people who build custom rigs. So many options, put radiator on top or bottom, fans everywhere, options for side mounting PSU, and room, so much room. Plus space to hide all the ugly wires and accentuate the pretty stuff. See the photos of my build! I didn't even go too overboard. The most impressive case I have ever seen or built. A little big but when you are building that once a decade rig, and you just got paid, what the heck.

Great case, very good build quality. It has great airflow to help keep components cool and is still quiet. A 4090 will fit, this is a big case.

One of the best built cases I have come across. Rather large but it's the XL version so know what you are getting. Incredible cable traces and form based design optimized for all the space for all the things you could need (comfortably could fit a 420mm radiator). Fans are quiet but could be improved for the pricepoint. Minor gripes aside, great case!

It's a huge case with plenty of room to work in and was way heavier than I expected. I personally think the black version is better looking and it would have been easier to find matching internals but oh well. The airflow is incredibly good and keeps my very old gpu that needs to be repasted a comfortable 67° where it was running at 80° in my previous case. Cable management is very easy and there is pre routed paths to follow, the layout for 2.5 ssd is also very slick and the whole case is very adjustable and easy to work in. The bad. I hope Antec starts making a solid metal or acrylic side panels because I know I'm going to end up breaking the tempered glass side panel one day with how you are supposed to take it off. Instead of screws to hold it in you have to wedge your fingers on one side and pull towards you which gives me extreme anxiety every time I have to do it. A few of the rbg pins on the fan hub were bent more than I'd like to see, and it's annoying that the rear exhaust fan isn't connected to the fan hub.

Its Large... like... really large. So if thats not what you want... dont get this. Pictured next to my o11 dynamic which is not a small case. I stealth mounted the bottom shroud fans below for a very very clean look. Ran into some issues with my psu and the ishift mount, but figured it out. took some finagling as the plug receptacle is in an odd orientation. But they do provide good instructions for figuring that out (which I didnt even notice till after I solved the problem). Good case, high quality. I will absolutely be carrying this one forward for more than one upgrade.

love this case but antec its so scummy selling a batch of white cases that comes crooked. mine's came with a very crooked part that by luck i could fix myself. and it was obvious that this was not a problem with the handling of the package it came like that from factory for the rest excellent case, very good looking very spacious and good thermals

Case Is Way Bigger Than Expected ! Worked Out Great Though Has To Be My Favorite Build So Far! Perfect Airflow & Thermals Are Cool & Fans Are Quiet I Kept The Stocks Fans Got Tired Of Too Much RGB , I Wanted A Slight Original Look With Just Enough RGB , It Was Easy To Build In! Cable Management Was A Breeze! Great Value For The Price I Paid ! Always Wanted A White Build & It’s Bright White , Waiting On My White Cable Extensions To Arrive Then I Will Be Complete!

大きく、拡張性があるので中身のデザイン凝りたい人におすすめ 上面にアクセスできるUSBスロットが二個でタイプⅭが一個なのでたくさんつなぎたい人は背面にアクセスしやすいようにケースを置く場所を考えた方がよさそうです。

This is probably one of the best cases I ever had to work with. It is VERY close to being perfect. As it stands, I'd give it 4.75 stars. The quality, fit and finish, as well as how well it is laid out, designed and machined is insane. I've been building PC's for close to 30 years now and it's incredible to see where Antec (and PC chassis design/quality overall) has got to in terms of quality. I remember cutting my fingers on sharp metal edges in Antec cases in early 00's. The only dings for this case are the included fans. Yes, many fans are included, but I wish that they weren't. At this price range, most PC builders would choose their own fans anyways. The included 140mm/120mm fans are non-RGB. Though 2 of them are reverse-bladed (the 2x 120mm on the bottom blowing at video card - reverse being they such from the frame side, wheareas normal direction fans exhaust at the frame side - frame side being where the arms holding the fan engine are). The built-in fan controller on the case has only space for 5x 4-pin and 5x RGB headers. So there is already not enough space on the fan controller to even connect all of the included fans. You basically have to hope that you have enough fan headers on motherboard to even power all of them out of the box. The only other thing about the fan controller is that the RGB connectors are a bit flimsy, and wire can easily pop-off at the slightest pull. But this is not really an Antec issue, its just how the RGB plug is designed - so an industry-wide flimsyiness. At some point they will add some sort of retention clip I reckon. I think they could have excluded the fans from the package, saved a bunch of money by doing so and maybe even lower the consumer price a bit as a result. The stock fans are nice enough, and have very nice sleeved white wiring. But the non-RGB of them was a deal-breaker for me so I ended up removing all of the stock fans from the case, and re-using 2x reverse-bladed ones as the bottom intakes near the PSU, they seemed to be perfect for that role. Given how many fans this case can support, I HIGHLY recommend looking into daisy-chained fan packages. And I don't mean the pass-through dongles some fans come with. Those are a nightmare if you have any more than 2. I mean the built-in passthroughs into fans themselves, that allow multiple fans to interconnect between each other and only use a single cable for power/data. These fans are a GODSEND for a case like this, especially given the limited fan controller space. Unless you are looking to invest into your own, larger fan controller in which case, all power to ya. There are pretty pricey solutions of daisy-chain fans available from Corsair, Lian-Li and others, but they are insanely overpriced. I'd recommend getting Thermalright 3x120mm TL-M12QW package for daisy-chain feature and insane value for price. Their aesthetics are a bit basic but given the price, can't complain. Hope they make white daisy-chain 140mm version soon. Your other daisy-chain140mm options are Thermaltake CT140. Of course, you can look into others but for some reason the daisy-chain technology empowered manufacturers to charge 3x-4x the price of a normal fan. Other than that, you will still probably have to end up adding more fans to the case, as it only includes a single rear-exhaust fan. So if they already think we will be adding fans/radiators, why not just remove included fans? I also wish that PC manufacturers figured out some sort of easier, faster way to attach fans, other than the screws. It is still a PITA to screw in 14 fans, 4x screws each, since the fan holes are typically non-threaded and thus can really take a massive effort, and the screws will almost always end up scratching the paint etc etc. Most fans have rubber dampening covering the screw holes, which doesnt make it easier to screw in. Unscrewing the 6x included fans, then screwing replacement 12... ugh, i had to take breaks, because each screw would require a herculean effort. NZXT I believe are coming with 3x 120mm fan assemblies, where its a single connector and 3x fans in a single frame, which I really do believe is the future of PC case fans. Multi-fan assemblies and/or daisy-chain interconnects, single wire. I am done with the wiring messes and old-school wire pass-throughs on fans. With RGB + PWM standard, each fan having 2x connectors and 2x pass-throughs is an ugly wiring mess immediately. No more. I have 3x such fans in this case rest are all properly daisy-chained with internal connectors, and difference in easy of use and wiring is massive. Will probably replace the remaining old-school wiring fans with daisy-chained ones in future. Again, I can't say enough about how well the case is designed. There are cable routing options everywhere and cable channels even below the motherboard. Yes, this will take some trial and error to get everything right, but the end result is definitely worth it if you really care about aesthetics of the wiring in your build. They also include an insane amount of accessories, extra screws etc all in a neat box. The manual is exceptional too and they even tell you how to wire-manage. The back of the case is a masterpiece with wiring channels, clips, velcro cable-ties, nooks and crannies. A wire-optimizers wet dream, to be fair. I'm not even so remotely obsessed with wiring optimization, its my least favorite part of the PC building, but this case makes you want to do a good job more than any other case I've had before. My previous case was Fractal Design Define R6. But you already probably knew all this if you watched any of the Youtube reviews of this case. But rest assured, the case is all that and more, and I think for the price, it is an extremely good value. They could have easily priced this at $350-400 range (CAD).

Lowered my gpu temps by almost 10 degrees. Upgraded from a phanteks p600s. The antec does feel a bit more budget quality wise but makes up for it with the excellent performance and value. 10/10

Excelente! La configuración predeterminada de los ventiladores es ideal

Great air flow, plenty of space for cable management. Is a bit on the bigger side but that’s fine. Did I mention it looks fantastic