Foam Cannon S V3.0 (Thicker Snow Foam Technology) with 1/4 Inch Quick Connector for Pressure Washer, 34 oz Bottle (V3.0 (1/4" Quick Connector) + SOAP Sample)

After going through an MTM, a cheap Amazon one, and the old MIJC V2, this V3.0 is on another level. What makes it incredible: • New “Thicker Snow Foam Tech” actually works – produces shaving-cream-level foam with even basic car wash soap (I use Chemical Guys Mr. Pink). One pass and the car is completely buried. • Adjustable foam thickness knob + air intake dial give you total control – from light pre-rinse to absolute blizzard. • All-metal 1/4” quick-connect and brass fittings – no more plastic cracking or leaking after a few months. • 1-liter bottle with wide mouth – super easy to fill and see how much soap is left. • Fits perfectly on my Sun Joe SPX3000, Greenworks 2000 PSI, and Kärcher K1700 – no adapter needed. I’ve used it 15+ times in 90–100 °F heat and it still looks brand new. Zero leaks, zero clogging, and the foam is so thick it just clings forever. If you want the thickest, most satisfying foam possible without spending $120+ on an MTM PF22, this is the one. Hands-down the best foam cannon under $50.

Best foam cannon I've ever tried. Used it on the Ryobi 1.8gpm automotive pressure washer, worked perfect, didn't try the smaller nozzle that was supplied with foam cannon but the one on in the packaging worked like shaving cream

Good foam cannon does its job and produces thick foam. I wish I knew ahead of time that the included orifice nozzle tips are only rated for certain pressure washer psi. Had to buy an additional 1.35 mm nozzle for higher psi pressure washer (for 2176 PSI (150Bar) ~ 4061 PSI (280Bar) pressure washer).

A nice upgrade from the previous version placing it more in line with the original pro model. The components are clearly high quality. Produces a nice foam with my Ego pressure washer even when using solutions that have less foaming ability. The size is typical, but the bottle design has some pros/cons. I like the single turn locking mechanism for the lid, which makes opening and closing much easier and faster. However, the bottle has a small base and is very too heavy, so I have had it tip over onto the concrete a number of times damaging the housing. The thinner bottle does make it easier to manipulate the bottle, but I think I would prefer a broader based bottle to prevent the tip overs. I have also had some issues with leaking from inside the spray housing when the bottle is upside down, like when mixing. I have checked the seals and even reassembled everything with tape at the threads but still leaks from inside the housing somewhere.

Without a doubt the best product out there! I would 100% purchase again! If anything I would’ve like the base to be more sturdy otherwise excellent product!

This foam cannon is great! Yes, it is very expensive compared to most, but I had a cheap tool daily foam cannon (also from Amazon) and the foam quality and the spray pattern were less than ideal. This mjjc foam cannon works much better. A couple things I really like about: 1. It comes with smaller diameter nozzle for use with pressure washers with a lower gallons per minute (GPM) rating. I'm using an electric pressure washer with 2400 psi and 1.2 GPM and the smaller nozzle definitely helped produce thicker foam. 2. The pick up tube that goes inside the bottle has a weighted stainless steel ball on the end so no matter what angle the bottle is at it never sucks air. It's a small detail that I appreciate. Overall this is a good buy and performs well, I just wish it was a bit less expensive

I didn’t even use it one time and fell from 5 inches off the floor and broke got a $40 one that lasted me much longer $92 for what?

So satisfying to seen the snow foam on the car. By far the best I've used.

The weighted suction hose inside the bottle is mint because its allways drawing soap out the bottle no matter what angle your using it on is Foam Cannon out there 👍👍

This works great with my power washer, i used my own liquid soap it still works perfect, worth the money.

Great foam canon well worth the money

Great product

Does what it is ment to do. But over rated and very pricey. I compared this to a $30 cheap foam cannon with a $5 mod of the insert combination with a metal mesh and a fabric material. What I did not like was the assembly in the lid wasn't locking well and is loose. The breathing hole on the lid made my soap run out. So be aware of that. The mouth of the container is smaller than the $30 cannon I bought. Construction is well made. The bottle is proprietary so no other bottle may fit. Other than the price a nice peice of kit.