KES Self Adhesive Toilet Paper Holder Stainless Steel Tissue Paper Roll Holder Hand Towel Holder for Bathroom RUSTPROOF Brushed Finish, A7070-2

Easy to install and so far sticking to wall.

In use since 2015, no rust, no falling off. Satisfactory product with good design. Durable.Why is it not available now?

Super easy to install. Peel and stick. Works great without stud or screws. Looks good too!

No holes to drill, no anchors to install. Solves the problem and has now been in use for over a year. Good choice.

Product looks great and looks like a permanent fixture instead of being adhered onto the wall. Installation was very easy.We got this for our apartment and we stuck this onto the glass wall. It's been there for over 3 years and is holding up fine.I'm not sure how easy the removal process is, however. There's no pull tabs to remove the adhesive like with 3M hooks, and the product doesn't seem to be as easily re-usable as the 3M hooks are as it doesn't use the standard adhesives from 3M. You either dispose or try to get some adhesive and make it work.

I love how low-profile this holder is, especially when used in a small bathroom with limited space. Strong adhesive hold and matched the design of the bathroom beautifully.

I have not found a suitable toilet paper holder that looks as nice as this classy version AND seems to HOLD UP LIKE IT WAS HELD WITH CEMENT! This holder is not only great looking & will accommodate any bathroom decor but it is EASY TO USE as well as it is EASY TO REPLACE & REMOVE discarded and New Toilet paper. What a find! The 3M peel away stick-um on the back might seem like ordinary scotch tape but believe me IT IS NOT! The ADHESIVE on this product is excellent. Just remember to place toilet paper holder on a CLEAN spot on a non used bathroom tile & DO NOT put it BETWEEN THE TILES so as to over flap on the tile grout! I cleaned my tile with ALCOHOL, wiped dry & than gently went over the tile with a blow dryer to make sure the tile was perfectly dry before I put up the toilet paper holder. Upon completion of the short blow drying of the spot for applying onto the tile, I QUICKLY peeled the back of the 3M tape & carefully aligned the toilet paper holder & slowly & at first, gently applied the holder to the tile. Voila! It should be up & running. (Pardon the Pun!) Just a TIP. As someone else mentioned, get a LEVEL to make sure it looks even BEFORE hanging. If your tile was placed on crooked you might want to EYEBALL the difference in leveling out so the toilet paper doesn't look like it was hung lopsided even though you might have it perfectly level. That's one of the draw backs if things are not done properly to begin with & the fact that after years of a house being built it tends to get a bit out of balance and sags & will no longer be perfectly square & level. So, if this is the case we need to work with what small indifferences there may be. This is a great product for a substitute toilet paper holder if you don't want to go through the trouble, aggravation & cost of installing one, in the wall with cement & tile. Buy this product, YOU WON'T BE DISAPPOINTED!!

I have a ceramic recessed toilet paper holder that would only take the smaller single rolls which toilet paper makers seem to have done away with completely. So now I was left with a hole in the wall and having to either reach up and behind me to grab the roll off a shelf or off the sink countertop in front which was a stretch, and not an ideal place to keep a roll of toilet paper. I know I could have installed a new holder somewhere else but I have a rather small bathroom and there really weren't a lot of convenient spots. And that still left me with a recessed hole in the wall that served no purpose. This worked out perfectly as the roll now sits in front of the recessed holder and fits EVERY size roll there is. I had originally put the ceramic stone around the holder so I was able to stick the stainless steel holder to the stone. The stainless steel holder is much heavier than I expected - excellent quality and attractive. I tried one of those extender spindles but that didn't work at all - did not extend far enough to accommodate a larger roll. If you are able to position one over an existing recessed holder, I would highly recommend this product.

I have a small collection of vintage handbags I wanted to display. However, because of the type of handle, typical hooks wouldn't work properly. These do the trick perfectly! I wish they were still available in bulk; I got a dozen when I initially ordered.

The media could not be loaded.  This thing is minimal but it's looks greatPros: Easy installation, strong adhesive, looks good.Cons: Kinda wish I installed mine in the other direction.

In my bathroom one side of my toilet paper holder just fell off. Being recently widowed after 42 years of marriage, this is something I would have handed to my husband and it would be magically fixed. My daughter is about as handy as I am so I would be waiting a loooong time to get it fixed. The old holder was positioned on the wall opposite the toilet and the bathroom had been completely renovated by people with long arms because I always had trouble reaching it. This one you can stick anywhere you want so I stuck it to the side of the vanity next to the toilet. It is a little too close now, but I am working with it because it was the only place to put it. It sticks really well. I have had it up for months with no problem.The only problem that I had , which is the reason I took off a star is that at the bottom arm that holds the roll, I wish that the little peg sticking up was either spring loaded or higher because sometimes when I am removing some toilet paper, the roll slides off because the peg is not high enough. Other than that, it seems to be sticking well which is great for me because otherwise I didn't know how to repair the original holder or use any power tools for that matter. It took me a year to rEalize that the reason my power screwdriver wasn't working, was because it was set on reverse!If there is any change in my evaluation of this product, I will come in and do an update.

This toilet paper holder is simple, yet effective. You mount the holder using double faced tape which is on the back of the holder. Just peel the paper and mount it where you want. Be careful though. Once you've placed it on the surface you want, it REALLY holds firm, so be sure that you have mounted it where you want it with the bar on the correct side (right or left). The only very slight pet peeve I have about it the toilet paper sits against the cabinet or wall where the holder is mounted. That is not a big deal though. This works for what I need and it is better than the other toilet paper holder I had before. With this one, you can tear off the toilet paper without it falling to the floor. The previous ones I have only held the toilet paper with two spring type clips and every so often the roll would come out of the clips and go rolling either into the garbage can or the floor. You really cannot go wrong with this holder. One of the nice little touches with this holder as well is the small jutted piece of metal at the end of the holders bar. That keeps the paper roll from sliding off the bar. One thing I would like to see with this holder is to make the mounting plate just a little more thicker so the dispenser sticks out a bit further so the toilet paper would "hang" instead of resting against object the holder is mounted on.

I purchased this toilet paper holder a month ago for my bath remodel, and may I say, it is one of the few bathroom accessories that has surpassed my expectations.Solid metal construction, quick and easy mounting with the adhesive backing, and a modern designer look that integrates well with similarly styled, more expensive brands such as Grohe. It holds a roll of toilet tissue perfectly, and dispenses it without fuss or noise. I turned it this way and that before taking off the adhesive backing, and found that in one position, it held the roll bar out more stiffly, and turned the other direction, it was floppier. I decided that I liked it to hold the toilet roll out from the side of my vanity more, so I mounted it that way and it works like a charm.It's been two weeks now, and the adhesive is holding it still. Since the weight of this product plus a large toilet roll puts minimal stress on this unit, I think it will probably hold forever unless someone deliberately misuses it (puts full body weight on it perhaps? I dunno, seniors do things like that now and then, so be careful about installing proper grab bars around your toilet so the octagenarians in your home won't be tempted).All this, and the price beat out the designer lookalikes. I love it. I would totally buy this product again for the next time I do a modern bathroom redecorating. Thanks KES!

I bought this to install over built in toilet paper holder that definitely does not work for the new massive size rolls. It is not a perfect solution since in order to line it up so that the tp hits the cut out space, the top looks off center. Also, the adhesive did not work at all for me. I used gel super glue and it has held like a champ for 3 weeks. Hubby is a little ticked that it will never be removed, but don't care bc I no longer have to fight with the tp for the first third of the roll. Overall I'd highly recommend it as long as you realize what you are getting and have a plan for making it work.

We have a little bathroom with no space for a traditional toilet paper stand and no walls near enough for a wall mounted roll. I got this hoping I could stick it under our sink next to the toilet but I was unsure if how well it would stick especially being used everyday by my careless kids. I have it on a slightly uneven porcelain surface but it has held up amazingly and is still stuck on there nice and sturdily.