Corsair RS120 ARGB 120mm PWM Fans – Daisy-Chain Connection – Low-Noise – Magnetic Dome Bearing – Triple Pack – Black

Just got this one system fan in my mini-itx to blow air inside - it works well. Note: In order for the RGB to work - you need to connect it as a daisy chain to something. It does not work connected straight to the rgb header on the motherboard.

Perfrctly working product. Very high quality.

منتج جيد جدا

Really good! It cools my GPU like crazy! it went from 70°down to 60° maximum! But it makes a little sound and the rpm was going up and down but I don't care about sound I care about performance.

These are some fantastic ARGB fans. Connecting all three together with daisy chaining works flawlessly. The PWM and 5v connectors are a little tight but it's expected if you're going to chain them in close proximity to each other so there is very little slack to deal with and cable manage. Comes with four extensions; 2x 5v ARGB connectors and 2x 4-pin PWM connectors with decent length. The noise is a note higher than my default case fans that came with my Corsair 5000D case. Silent mode fan speeds with my default fans made no noise. These Corsair R120 ARGB generate a little bit of noise on Silent mode profile.

good quality

ممتازة جدا سرعتها عالية وممتازة للتهوية

Decent fans. RGB colours are quite nice, not too bright. Air flow is also good, default speeds are a bit loud. Do need to adjust them via mobo or otherwise have decreased temps in my mid tower case by a fair amount. RTX 5070ti idle before at 40 degrees down to 29 degrees C. Cpu idle 31 degrees down to 27 degrees. RTX full power was at 72-76 degrees depending on game, with fans installed now down to 64 degrees C. Internal case temps dropped a considerable amount too, about 10 degree drop overall. The cable length is disappointing, could do with more length and more of a insert to place cables which aren't used. Bought a separate PWM Fan controller to connect all together. Probably get more out of them if stuck on full speed but the sound isn't worth it. Pricing was ok due to black friday deals. Installation was ok, was a bit annoying as I can have 2 120mm fans on the top, then the other had was used at bottom front panel. Luckily cables provided just about reached, they wouldn't without my additional fan controller. Just a FYI for all who do not place all fans together in a true daisy chain. Update: bought another set of 3 RGB white to complete the aesthetics. I was thinking adding the other 3 fans would be more audible but nope, exactly the same & still quiet enough. Pushes more air through and dropped ambient temps another degree and highest temps also by 2 degrees. The daisy chaining was still a pain in the rear. Luckily I've got a bunch of extender cables just incase & to help the addition of future fans to add later down the line. Overall, currently benching the machine. Cpu temps have dropped by about 10 degrees underload, idling at 32 degrees. Motherboard idles at 30 deg rather than 49. GPU dropped from 65-76 down to 57 deg C underload, idle dropped to from 40 down to 24 degrees w/ fans at low RPM on the gpu itself. Ambient case temperature has dropped from 68 down to 52 degrees. The machine is now cool inside at max load. Much happier, but the gripe remains about daisy chaining. Used SignalRGB to override all colours and working well.

Fan var ışıkları yanıyo