‎Frychee Wall Corner Protector, Walls Edge Protector，Self-Adhesive Wall Corner Guards,PVC Double Side Edge Protector， Furniture Stairs Guard (2, 2.5x90cm/0.98x35.4in)

As described. Looks nice and worth the money

Good. Worked as expected.

we got these as that they have multiple mounting options and some of our walls are blocked and can only use adhesive. We have a few corners in particular we need to protect so these will be helpful. However, they’re really just a piece of plastic that you stick onto the corner so the cost seems quite high considering what they are. These are hard plastic compared to some others that are a softer plastic. I’m not sure which is better but these are about twice as much.

Covered a chewed part of the corner perfectly.

To my surprise, there are actually 2 of the Frychee Wall Corner Protectors included. They are identical and both about 36 inches (3 feet). I went back and read the entire product description, and I don't see that it says anything about 2 being included, so that was a pleasant surprise.Note that the product does have a slight shine and you can see a slight reflection in it if you look into it. I ordered the totally clear ones, the ones without the red tearaway strips.Great that it can be installed with screws or adhesive and wonderful that both options are included.The screws have an additional covering that can be seen in the product's main picture that are smooth so it has a more complete look when installing with screws instead of seeing the screw head.It also has 14 clear, flexible strips that are approx 1-2 inches each are clear and can be used if want to install without drilling into the wall. You can't tell by looking at it, but there is a thin covering so that there is adhesive on both sides. It takes a minute or so to figure out how to remove it, but it is there. I was beginning to think there was adhesive on only 1 side, but I just needed to try more carefully to remove the thin clear covering. Seems like a high quality product!

It is a decent solution for commonly-damaged corners. But, in reality, not all corners are strait 90, and just 2 screws on top and bottom are not enough, the plastic is wriggly and noisy. I had to use one sleeve and all (8) screws to achieve a reasonable corner protection - and that is way too expensive.

I recently purchased the Frychee Wall Corner Protectors, and they have proven to be an excellent addition to my home. These self-adhesive PVC double-sided edge protectors are designed to safeguard walls, furniture, and stairs from daily wear and tear. Here's a detailed review based on my experience.The installation process was straightforward. Unlike other products that rely solely on adhesive tape, these wall corner protectors offer an innovative option: screws. This feature is particularly useful for ensuring a secure and stable installation. The screws provide a strong grip, making the protectors reliable even on humid or uneven surfaces. Additionally, if you ever need to remove or adjust them, it’s an effortless process that doesn't leave any unsightly marks on the walls.One of the standout features of the Frychee Wall Corner Protectors is their wall-friendly design. Traditional adhesive-only options can often damage paint or leave residue marks, but these protectors are designed to avoid such issues. They can be removed without harming the walls, maintaining the beauty of your home while offering robust protection.Durability is another strong point. The protectors are made from thickened PC material, which is both impact-resistant and scratch-proof. This makes them ideal for high-traffic areas and homes with wallpapered surfaces. They provide a larger surface area for the screws to grip, ensuring that they stay in place over time without losing their sticking power.The aesthetic appeal of these protectors is also worth noting. They blend seamlessly with my home decor, offering a stylish way to protect my walls. The clear 1.97x1.97in size is unobtrusive yet effective, adding to the overall look of the space rather than detracting from it.Safety is a key consideration, especially in homes with children and pets. The Frychee Wall Corner Protectors act as a protective barrier against sharp corners, reducing the risk of bumps and bruises. This added layer of safety is particularly reassuring for families with energetic little ones and curious pets.This Frychee Wall Corner Protectors have exceeded my expectations. They combine style, durability, and ease of installation, making them a fantastic choice for anyone looking to protect their walls and furniture from daily wear and tear. If you’re in the market for reliable and aesthetically pleasing wall corner protectors, I highly recommend giving these a try.

Got these to protect the wall corners at the top of my stairs & they’re working great! They were super easy to install. Either peel & stick or screw them on with the included hardware. With peel & stick, just clean your wall corners up really, really well, peel the backing off & stick them on. The adhesive seems to be good quality & they’re holding well.I like that these are clear so they don’t stand out like a sore thumb on my pretty walls. I can definitely recommend these ones!

I got this wall corner protector to keep my wall edges safe from scuffs and dents and it has worked really well. The protector was easy to install since it comes with adhesive backing so I just had to peel and stick it to the corners. It fits snugly along the wall edge and doesn’t stand out too much so it blends in with my decor. The material feels durable and it absorbs impact from bumps or furniture pretty well so I don’t have to worry about constant repairs or repainting in those areas. It’s especially useful in high-traffic spots like hallways where corners tend to get worn down fast. I think it’s a good option if you’re looking to keep your walls in good shape

I have several doorways and columns in my house where the paint is constantly chipping off the edges; these wall corners solve the problem. Once the wall corner protectors are installed, the paint is now protected and there is no more stripping and chipping.I removed a star because the double sided tape which is used to attach the protectors is a bit thick and so there is a gap between the wall and the edge of the corner protectors. To get around this, I completely removed the tape and instead used construction adhesive to attach the corner protectors.The corner protectors are decent quality, though I would have preferred if they were made from aluminium instead of plastic.

Got this to protect high-traffic wall corners in the garage. The protectors seem of good quality and are crystal clear. They come in a sturdy/protective tube and with a plastic film to prevent damage/scratching during transit. I did not need to reduce their length, but the material can be cut with a multi-purpose fine saw if desired.Installation was extremely easy: after wiping the walls clean, I lined the protector at the desired height and used an electric screwdriver to attach them to the wall. I did not need to use the included hardware, but it seems of good quality and it is nice that it is provided. I installed both protectors in less than 5 minutes, after spending almost 10 minutes cleaning and prepping the surfaces...TIP: Don't forget to wipe the inside of the protector with a lint-free cloth and appropriate cleaner right before screwing it to the wall. Otherwise, the material is clear enough that lint, fingerprints, and/or streaks on the inside will be trapped and forever visible after installation!The one improvement I would make is to add 2 more mounting holes in the middle of the protector. Although it will not fall off after being screwed onto the wall at both ends, depending on how perfectly straight the walls are, there is a small gap between the protector and the wall near the middle. This does not affect functionality, but it makes noise/rattles when bumping against the protector, which can get annoying over time...All in all, a quality product that is very easy to install, looks great and gets the job done. Recommended!

As advertised!, Thank you.

Our 6th project using Frychee wall protectors, this one for the garage. This one is slimmer and great for shorter walls and workbenches.Installation took about five minutes as some oils and grease, as well as a lot of dust, needed to be wiped away and the surface alcohol dried. The instructions are very easy to follow and there is an included measuring tape in case you want to cut the corner protectors for a custom fit. For these I am going to add some external screws since it is in the garage and will be subject to extreme cold and heat which would do a number on any type of adhesive.The protective tape peels off easily from either side once you have it in position. The dark protector blends in nicely and provides some peace of mind and inexpensive protection.