Jiusion Aluminum Alloy Universal Adjustable Professional Base Stand Holder Desktop Support Bracket for Max 1.4" in Diameter USB Digital Microscope Endoscope Magnifier

Purchased this as I need to solder some surface mount components as attempting that would be impossible with the original flimsy stand provided with the microscope. The vertical reach of the column is not tremendous, so I will have to be careful using the soldering iron that I don't inadvertently catch and burn the plastic bezel of the microscope with the shaft of the soldering iron. This is something you can easily do if you are concentrating on a separate screen. With a steady hand you could probably just manage SMD soldering with it, but you are probably better off with a combined microscope and display designed for the purpose, rather than the separate Raspberry Pi display setup I have. As a general purpose microscope stand though it is excellent, not Mercedes-benz build quality but solid enough. The ratchet is a bit sloppy, as others have said you need to roughly focus on with the stand, clamp it down then finely adjust the focus on the microscope itself. The case is a lovely bonus, well made and semi-rigid it holds all the bits in one place. Very pleased with my purchase, even if it didn't quite fit my original requirements.

The microscope stand comes in three sections - the rack and pinion slide arm with microscope mount, (ring) The base, with four rubber feet already attached The mounting bracket, with two fixing screws, and an Allen key to complete the assembly. Total assembly takes less than five minutes, and results in a very smart, and very rigid and solid stand. In use, the slide assembly is smooth, and an adjustable thumb wheel allows tightness to be adjusted, so that the slide can be moved easily, without any juddering. The microscope is retained by two adjustable thumbscrews, fitted with plastic buttons, to prevent damage to the body of the equipment. The stand arrived as three components - base, stand, and mounting bracket, all neatly packed in a rigid zippered case. Once assembled, the rack and pinion arm and head can be easily unscrewed, and together with the base, can be rapidly stowed in the case, with enough space to store the microscope, (not included with the stand), which is ideal. This microscope stand is well-made, solid, and operates smoothly - with the bonus of a rigid plastic carry case - it’s an exceptional bargain!!

It came in a plastic case with a zip for opening and closing it. Once assembled it didn't fit the case so there wasn't much point in supplying an undersized case. I won't dismantle it to fit it back in the case. I'll use the case for something else I expect. It is sufficiently solid to hold a camera without any play. It has to be assembled as expected. An Allen key is supplied to fit the two bolts that hold the bracket onto the base. I was a bit surprised that the retaining ring collar is made from plastic when the main parts are metal. There are only a few turns of thread on it, so some care may be needed not to overtighten it and strip the threads. The rack and pinion raising and lowering mechanism is nice and free of play. The locking screw holds the position of the camera holder firmly. It has a nice high quality finish. Overall I'm happy with it. It's very good value for money.

Works great for holding the low-cost USB-powered microscopes. The adjustment screws securely hold the camera/scope to the frame and will accommodate a wide range of diameter. The frame is sturdy as well as stable. When you snug the rail lock thumbscrew, the holder frame moves up and down smoothly. This is magnitudes better than the flimsy, unstable frame provided with the USB microscopes (which are basically unusable for high magnification). One last plus is that it comes with a fantastic case - so no need to purchase case with USB microscope. (photo) Basic low-cost USB microscope in stand with simple slide holder and backlight I made on my 3-D printer (you do need something to hold slides as the base finish bumpiness and reflectivity is distracting depending on your depth of field).

Bargain. Very good quality.

Turned my MoKo Wireless Digital Microscope, (4.3-inch Full Color LCD WiFi USB Microscope) from a plasticky toy to a brilliant bit of kit. Made it stable and less prone to knocks and vibration and made the whole scope more functional with its adjustable height coupled with the scopes zoom/focus etc. Really happy with this stand and the price alone means it is great value. It turned my £40 scope into what feels like a professional £200+ unit all in for about £57......(microscope and stand) If you have a scope/camera that feels a little like a toy/hobby bit of kit, buy this. It will transform your use.

very handy quick delivery

It works adequately on my Jiusion USB microscope (which is hopeless without such a stand). It is aluminium (including the drive rack) so it will not be especially durable, but probably adequate for home use. The machining tolerance on the rack is terrible (wobbly), but the clever design of the friction clamping screw means the looseness of the adjustment does not translate into a wobbly held position and the microscope is easily focused. The adjustment range is quoted as 0 to 7 inches (0 to 18 cm). That is a blatant LIE, which annoys me. The length of the milled rack is 4½ inches as a generous measure (4.4 inch). They have measured from the flat top surface of the stand to the top of the vertical post. That is not the adjustment range! Sure you could loosen the clamps on the microscope body, but that should not be counted as “adjustment range”. Wind it to the bottom of the rack. Call that zero. It then moves 4.5 inches as a maximum. That is a long way from 7 inches. It does a reasonable job at a good price. It loses a star for lying about the spec.

Oldukça kaliteli bir üründür. Tamamı alüminyum alaşımdır . Biraz pahalı.

仕事用のデジタル顕微鏡で、使えました。 汎用性もあり、値段の割には しっかりしていてびっくりしました。 昇降もしっかりしていて、調整ネジで昇降時の動かしやすさも、調整出来るので安定して動かせます。 組立用の工具もついて、さらにケースもついているので外出先でも使えますね。

Bis zum kleinen Klapp-Ständerchen ist das USB-Mikroskop einfach, aber praktisch! Dank UVC-Standard kommt es mit jedem möglichen Betriebssystem zurecht und kann mit einem beliebigen Webcam-Viewer oder ähnlichem benutzt werden. Die eingebauten LEDs sorgen für genügend Helligkeit und der Fokus-Trieb ist leichtgängig. Die Bildqualität hat mich positiv überrascht: Mit meinen Kindern habe ich früher Insekten mit wesentlich kostspieligeren Geräten angeschaut. Für meine Enkel habe ich nichts mehr in der mittleren Preisklasse gefunden, mehrere 100 € waren mir aber zu viel. Also mal dieses Mikroskop ohne große Erwartungen versucht. - Es hat die Qualität meines alten deutlich übertroffen.

A great way to control the movement of the microscope. Heavy duty and great build quality.

I have a Plugable microscope that came with a gooseneck stand that was quite frustrating, if not impossible, to use for going through my U.S. pennies--the camera, which is very sensitive at higher resolutions, would move together with its suction gooseneck and would require adjustments all the time... This all changed after I received the Jiusion digital microscope stand. The stand is indeed very sturdy: it doesn't move or shake at all when I change the coins on the base. So I keep my settings untouched, and now going through the coins has become enjoyable again. I don't have to strain my neck, which used to be sore after looking through a number of pennies at a time using a loupe. I found the adjustment mechanism of the stand to be very smooth, and as I said, the holder keeps my microscope steady and settings undisturbed. One thing I would suggest to the manufacturer is to include a longer screws for holding the scope. The screws that came with the stand were too short and wouldn't hold my Plugable scope. I had to go to Home Depot and pick up a couple of metric machine screws to use instead, which wasn't a big deal, but it would be nice if the holding screws were about half a centimeter longer. Also, the box that the stand came in wasn't as robust as one would expect. It was totally squashed when the stand arrived, and I was concerned that the parts were damaged. However, since the stand was shipped disassembled, and the parts were protected with the popcorn wrapper, everything was fine, and the assembly was easy without any problems. I think that it (the squeezed box) was probably a result of a freak accident, but I'd look into that if I were the manufacturer. To sum up, an excellent product, which would benefit from a little longer holding screws. I expect to enjoy the stand for years to come.