Watch Band Connectors for Apple Watch Band Adapter, Replacement Link Attachment for iWatch Ultra (49mm) Series 9 8 7(45mm 41mm) Series 6 5 4 SE(44mm 40mm) Series 3 2 1(42mm 38mm) Straps 2pack

Apparently, with time, it is not unusual to lose a screw in your Apple Watch. Unfortunately, this is something Apple does not address, so you need to search for a third-party vendor to supply the necessary tool and screws (essentially, the correct size screws and appropriate screwdriver). I did my research and settled on this, and amextremely satisfied. I don’t think there is a better/cheaper fix for the when you lose a screw to your Apple Watch. Of course it is bundled with a couple of pieces you may really need and may never use, but still, the price is right and everything works and fits perfectly (as advertised).If you should lose one and need a replacement, this is the product for you.

I'm reviewing "Watch Band Connectors for Apple Watch Band Adapter, Replacement Link Attachment for iWatch Ultra(49mm) Series 9 8 7(45mm) Series 6 5 4 SE(44mm) Series 3 2 1(42mm) Straps, Starlight (2packs)" which I received via the VINE program.I like having the ability to swap out my Apply watch bands at will, almost like it's a piece of jewelry instead of the highly utilitarian smart device it is. I have started making watch bands out of fabric and want to try to make a leather one too. I have several old Velcro/elastic style bands that I cut the attachments off and used them for my first couple of sewn bands but I wanted to be able to create a loop that the attachment fits through for a cleaner more professional looking finish.I saw these and decided to get them. I didn't see the single review talking about how they don't fit until I saw down to make sure these work. I had no problems in sliding the attachment into my Apple Watch 7 with the 45mm case. I did notice that I had to angle them a bit more than I expected and that they will only really slide in and out from one side. But that's the case with any watchband on an Apple watch.Now, onto the rest of the review. This comes in a little plastic box with a precision tip screwdriver and attachments for 2 watch bands. They also include two extra screws. Break out the precision tweezers when you remove the bar piece and make sure you're working in a very well-lit area. These screws are TINY, and I mean really TINY! The screwdriver is just like any other jewelers screwdriver, designed to hold onto the top with one finger to keep it in position then rotate the barrel to screw it in/out. The tip of the screwdriver is also slightly magnetically charged to grab ahold of the screw, but if it's on a surface that has more 'pull', you'll need tweezers to guide it into the hold to attach the bars!I do want to add that the finish on these is very nice and I did not see any differences in the two pairs. The screw holes/bars are consistent from one to the other.My fiddling with it lets me know that I'll have no problem creating new watch bands so that I can swap them out for whatever is calling to me that day. I'm very happy with these and would not hesitate to purchase more in any other finishes they offer.

These don’t even slide into either my new Ultra 2 or series 7 they are way too thick.The manufacturing is so bad they are all different thicknesses, as the picture that I took the time to take and upload shows.Absolute junk, waste of money do not buy them! Going into the garbage.They sent me a response saying I installed it wrong like I can’t slide on an Apple Watch band and must have an IQ lower than room temperature. 😑 I am not sure what is more insulting, the fact they sell this junk or that they blame me for not being able to slide on a watch band… and now keep sending me emails saying I installed it wrong ignoring the photo which clearly shows it’s way too big to fit.Anyways avoid at all costs, but look seven instead, I did and they fit great!

It’s a good kit to either make your own watch band or fix your band. There’s extra screws in the kit. The screwdriver is magnetic which is so helpful with such tiny screws. Everything is shipped in a reusable case.

This connector fit solidly into the Ultra and stays secure.There are a couple of things that I'm concerns about. The screws for one. But the loc coating on them does bring some comfort. The other thing is the two piece construction of the bar that holds the band on. On one hand it looks a LOT better than the little spring bars that the old watches had (and you still see a lot of today), but the weakest part is now hidden in the center of the band. Maybe I'm too pessimistic. It seems sturdy but I'll update if somehow fails.Recommend 👍🏽 Helpful? 👇🏽