AstroAI 8Pcs Multimeter Test Leads Set with Alligator Clips | Plunger Test Mini Hooks and Test Probes 1000V 10A CAT III & CAT IV 600V for Fluke Multimeter, Voltmeter, Clamp Meter

Good quality leads with robust plugs or a secure connection to the meter and probes. Good value for money as the set covers probably all of the metering connection test probes you will need. As the basic probe set delivered with the meter were faulty due to one of the strain relief shrouds being overly bent and causing a beak in the wiring, I would recommend ordering this set with the meter.

Good quality, and good price to expand the possibilities of my multimeter.

The leads and probes appear to be made of high quality materials with no obvious flaws in manufacture. All items are marked with their maximum voltage and current limits and are "CE" marked. The standard probes show low resistance (0.2 - 0.3 Ohms) on my Fluke 73 multimeter, exactly the same as the Fluke probes, so pretty accurate. My only criticisms are: 1. The probe heads are a bit on the long side. While this is caused, in part, by the adaptability of the probes (the heads can be swapped), they can be awkward to manipulate in enclosed spaces. 2. The croc clips can only be attached to the probe tips (with the sleeves removed), which makes the probe heads even longer! I wouldn't recommend these for professional use - I would always recommend Fluke or Sealey. However, at a tenth of the price of Fluke probes, these are perfectly fine for home and DIY use.

Great

Good value

Good leads and clips fitted my fluke meter perfectly

The mini hook leads are shorter than the rest, which I do not understand why. For me is working well enough as I do not have the need for longer ones, but I sure at some stage it will come handy. However that will be an exception and the product is still decent.

I guess the overall quality is ok for the likely use. Most of the probes are fine however the leads of the plunger mini hooks are ridiculously short at around 300mm meaning that frequently the actual meter would be far too close to anything being tested. 2 times longer would be much better. I thought the other leads supplied could be used as extensions but they can’t as far as I can see. Disappointed.

Me gustó mucho el materia de que está hecho, viene con excelente ajuste para los multimetros que uso, todos los accesosrios tienen muy buena calidad quedo bastante satisfecho con esta adquisición, independientemente de que llegó en muy buen tiempo, puedo decir que de mi parte a la evaluación en general queda en un 100 muy contento y satisfecho con este producto

Lots of options and they work well.

Have a Klein MM400 CATIII 600V multimeter. Was looking for a leads kit rated for CATIII, which this kit is. Purchased this kit to provide spare lead, alligator clip conversion and lead with miniature hook clip for circuit board testing. The primary test lead is 18AWG, the same as the Klein test lead, but the lead has thicker shield/coating which should mean longer life. The lead ends fit snugly in the Klein tool ports. The test leads and accessories are also labelled well with regards to their rating, which is important for safety of the use of the tool. Because the design is component-based it should mean lower cost for replacements, as some components may last longer than others.

A great little set of connectors for my personal PSU. Good clipping options and seem to be of a good quality.

普通のプローブの先に付けられるワニ口クリップが便利です。 手持ちのマルチメーターのプローブの先にも付けられました。 これだけ単体で売って欲しいくらいです。