Art3d 12"x12" Peel and Stick Backsplash Tile Sticker for Kitchen, White, (10 Sheets), 30 * 30cm (A17049P10)

I’m pretty happy with the results of my kitchen after installing this product.However, after the first night I woke up to bubbles....I was able to fix but I can still see some - which is annoying! Be super careful as you lay it down. Don’t stick it quickly and DO NOT remove the backing until you have smoothed the tile over the wall super slow. (Prevent those bubbles!!!) I made a few beginner mistakes - the tiles weren’t completely straight, tho no one can tell, if I didn’t align correctly and pulled it up, I damaged some of the faux grout and lastly I didn’t use a tape guide or a sharp enough knife to cut/place everything perfectly straight. I installed this on a plasticky cheap preinstalled backsplash and the adhesive went on WELL. I see that almost everyone who installs this and the tiles fall down are installing on textured walls. It will not work on textured walls so don’t Waste your time or money. This will stick well to wood, real tiles, plastic or Formica backsplash and flat clean surfaces. I ordered one pack of tiles for a 14 x 90 inch backsplash. But I need a bit more for the outer edge. The project took me under an hour. I’ve only had it for two days and hope they last a long time....

This is an AMAZING and affordable alternative to real subway tile backsplash. My husband installed it without any issues. I had ordered the spray adhesive but it's not necessary. This stuff sticks VERY WELL! My husband tried out 2 pieces and took them off the kitchen wall, and the pieces are so sticky they ripped of portions of paint layers that were on the wall lol. He left the pieces for several days expecting he'd have to use the spray adhesive to reattach them because he thought they'd dry out but they didn't. So, great adhesion, fantastic price, easy install and amazing look. Friends and family didn't believe it was peel and stick. They thought it was the real deal. I would say the one thing my husband didn't like was having to be extra careful when peeling off the plastic to reveal the sticky side, as it would tare the piece in fragile places where the notches are cut out. But really aside from that we had no complications. It's sooo easy to clean with just a damp cloth. Absolutely love it!

I initially installed these June 1, 2022. I loved the look, I used adhesive spray that I bought from a hardware store to help secure the bond to the wall. I wouldn't say it was difficult, but it definitely took a little bit of time to get them up there. The first three photos are my finished product, which has been exactly what I wanted. The last two photos were taken September 2024. You can see the stick up tile has turned a bit yellow, and there are some slight areas that unstick occasionally, But I can just press those back down and they're good for another couple weeks. Eventually I will get the adhesive spray in properly fix those areas.Since I installed it in my laundry room, I know the heat and moisture in that room can play a part in some of the changes that I've seen. Overall even with the slight yellowing, it still looks nice. And yellow happens to be one of my accent colors in there, so I'm doing okay with that.The tiles are great thickness, even the adhesive it comes built in with seemed a really good quality. Cutting it to fit was also easy.Keeping in mind the couple of things I pointed out, I would absolutely recommend these if you can live without outcome.

Decent price with the coupon and so I decided to give this one a try. If you follow the instructions, installation isn’t too tricky and results are great. It does take a steady hand, a sharp cutting knife (I used a razor blade), and a good cutting setup (I used a self-healing cutting mat and a long ruler).It’s really important to overlap the “grout” evenly. And a couple tips for the sections that are blank that say overlap here: First, if you follow the instructions, the words “overlap here” are upside down - that’s ok! Second, cut just a little sliver off the bottom of the bottom overlap square. I found it sometimes came down a bit too low and I struggled to cover it and keep the next sheet of tiles aligned properly.Photos are of my project, a basement bar area. The wall was clean and dry when I started and the tiles stuck very well. I am going to add some grey caulking on the side edges to create a defined border.This was the look I wanted and for the ease of use, I think this was a good value. So much easier than putting up real tiles!Edited to add: This was on eggshell finish paint on a smooth wall. A lot of the reviews that show peeling issues, you can see the paint finish is probably a satin or semi-gloss (and some the wall just has too much texture). If the paint you are applying over has more than an eggshell finish, go over it with a fine grit sanding block first, then wipe dust away before applying.

This looks amazing in my kitchen! I watched installation videos before I started. The people in the video made it look much easier than it really is! I found it stressful to get everything lined up correctly and straight! It sticks great to my wall which is isn’t a perfect wall. I am experiencing issues with the seams. You can see where the sheets go together and I’m finding that after a month later it is not sticking great where the pieces overlap. I chose this product because I wanted a tile backsplash without real tile. I love that it shines and is easy to clean. I love how it look but I don’t like that it is showing wear so quickly in the seams. If I were to do this again I may attempt to paint what looks like a tiled backsplash because it would hold up better. I do get many compliments about the backsplash. It truly looks great. I am the only one that notices the separation, but it’s bugging me!!