Touch Screen Monitor with Case,ROADOM 10.1’’ Raspberry Pi Screen, IPS FHD 1024×600,Responsive and Smooth Touch,Dual Built-in Speakers,HDMI Input,Compatible with Raspberry Pi 5/4/3/Zero,Versatile Stand

Quality and accessories are good.. slightly wobly when the pi goes on it while touching.. and the touch screen is bad.. i touch one side of the keyboard and it starts touching random other keys on the same line.. tried this on both screens i bought on 2 different Pi’s as well.. otherwise good for what i intended buying it for

UPDATE: The only down side I found is that it is very tricky to access the MicroSD card when the Pi is mounted on; this can be easily solved with standoffs that lifts the Pi up a little which gives more room for your fingers to pull and insert the card. In the picture I used 11mm brass standoffs. I also put some tape around the edge of the MicroSD card so it could be easily pulled out. ORIGINAL REVIEW: There are 2 versions of this monitor: a 7" and this one which is 10.1". On the 7" version the ports are located on the side, where on this version they're more inward because, well - it is physically bigger. Because of this, the mounted Raspberry Pi on the back along with all the cables are less visible from the front. For this reason and because I wanted something small and still big enough to read from, I decided to go with this 10.1 version and I'm very pleased with it. The box of this monitor is quite rich with stuff - you won't need to go and buy any cable to connect it to your Pi as it comes with all the cables you'd need - it also comes with a screwdriver and screws for mounting your Pi. I didn't even have to use its power adapter as I already have a power adapter for my Pi, and I just connected the included short USB cable from my Pi to the monitor's 5V+TOUCH port to power it up, which also enables the touch. The only thing I did added which wasn't included in the box is a convenient ON / OFF power switch cable, as the Pi 4 that I'm using doesn't have a power switch. The idea of screw mounts specifically for the Raspberry Pi on the back of the monitor is what makes this monitor a very good product - I began a Raspberry Pi course and had trouble trying to keep my Pi and all the cables organized on my desk, which every time turned into a mess when I touched one of the cables. No more with this solution - I mounted the Pi on its back, connected all the included cables and forgot that it's there. It's like having an all-in-one computer, just smaller. :) My desk is now cleaner, and every time I want to access the Pi I just flip the display to its back, do whatever I need and flip it back to the front. The built quality seems and feels very good. It's plastic all around but it seems to be built to last. The tension of the stand is quite firm as well and very steady, and the touch feature is very responsive with no delay or lag. When I got it, I almost forgot that it has internal speakers. I realized that when I went into its menu settings and suddenly saw "Volume". These built-in speakers are very nice thing to have for occasional use, but don't expect too much of them; I have a simple mounted stereo speakers soundbar on my main monitor so I'm no hardcore music listener by any mean, and so to me these built-in speakers are quite good for this small form factor - and it doesn't take any additional space on the desk. To access the menu you use the buttons on the right hand side: there's an ON/OFF button, a Menu button, an Up button which is also a shortcut to access the Brightness, a Down button which is also a shortcut to access the Volume, and an Exit button. The screen quality is very sharp, though only when used on its proper native resolution, which is 1024x600 (if you try different resolutions the image won't be as sharp, but it's a common behavior with all LCD monitors). Though, on boot, I'm not sure why the on-screen menu shows 1280x720, as this is beyond what this monitor is capable of - you can set it to that resolution or even to Full HD from the OS side too, but again, the image won't be as sharp, so make sure you keep it on 1024x600. The menu of this monitor is also quite rich with settings that I didn't expect to find on this small form factor, such as color temperature presets, energy saving and also a low blue light setting which makes the screen appearance to a warmer one, like how your smartphone nowadays does - it doesn’t do it automatically though, but I really appreciate this feature, as I'm quite sensitive to blue lights. Beside of this, you have the traditional 4:3 and 16:9 aspect ratio toggle settings so this monitor could be used for playing retro games at the correct aspect ratio as well. Attached some pictures that I took from the unboxing process for your impression (I blurred some areas that reflected my personal environment). Hope you'd find this review helpful.

I used this to put Lineage OS on a Raspberry Pi 4 to make a bartop interface to my ai server so I could generate cocktail mixing instructions on the fly. I have two issues with it. The first is the resolution is lower than I would like. It's advertised as "HD" but the actual resolution is below 720p at 1024x600. To be fair that is also clearly stated but I missed that part. Secondly, the base is quite wobbly, making it difficult to use an onscreen keyboard without the whole unit shaking. You could probably fix this by securing the base with some double-sided adhesive tape or something like that. I haven't tried yet. Other than that it works as intended. They have the right idea, but the execution needs improvement imo.

So far I love this thing. I had a bad experience buying a screen from Aliexpress that said it was made for the Pi, but not only could I not power it through the Pi, but even normal 5v power supplies I have couldn't run it consistently. I don't have any issues with this one -- it powers easily from the Pi (I'm using the GPIO pins) and so far just works. The touch screen also immediately worked. Only thing I had to troubleshoot was I couldn't get audio, but it turned out I just had to set the Pi audio to HDMI. The size is good for me because I have bad eyesight but am trying to make a compact computer for fun. It's amazing all the cords it comes with. I've never bought something that was this complete. I mounted the Pi to the back and it works well. The cords (especially the GPIO cord) are pretty short if you're not going to mount the Pi, but it can still work. And you should be able to hook it up w/out the pins if it's too short I believe (I haven't tried it.) So far, couldn't be happier

I'm using it with a pi 4: 1. It comes with a ton of cables and screws, everything you could possibly need. And then more. 2. The included manual is actually good for once. It has very clear pictures explaining how to hook things up. 3. It assembles really quickly and solidly, unlike some others that seem kind of loose 4. It just works without any configuration or tweaking of drivers. 5. It's fairly low-res, but fine if you're using it to display something that will be viewed from at least a few feet away. 6. The weather at the bottom of the second picture is scrolling; that's why it looks a little less-sharp.

Worked great on my Pi 4 and 5. Display is bright and the range of viewing angles are good. The touch works well and is responsive. Use it for klipper control. I wish the USB C port could display video but it can’t. You will need a min of 2 cables, HDMI, and then USB C for touch and power.