Question 1

does this have to be rinsed or wiped off, or can it be coated over after drying without rinsing/wiping?

Accepted Answer

My experience.  Used it this summer on some serious rust on a jeep floor panel.  I followed manf. instructions best as I could. Removed as much loose rust as possible.Thoroughly wet it down w/metal blast, waited, and rinsed with water while metal blast was still wet.  I let it dry completely before coating with rust bullet. I could see the transformation of the rust layer after metal blast. Seemed to convert the rust to a solid base. I believe this uses phosphoric acid, so likely the reason for thorough rinsing. I would think the rust bullet may not adhere well if any residual acid is left behind. If left to dry, maybe respray a bit and rinse while still wet.Overall, seemed to work pretty good. I used this combo on many rusted areas on the jeep. In some spots aluminum body filler was used followed by paint. So far holding up ok. Will tell better after the salty upstate NY winter. The key is getting to ALL the rust. Good luck.

Question 2

how is the product used?

Accepted Answer

We put it in a spray bottle and  we're  using it to remove the rust from my old truck.

Question 3

Can I rinse this off with isopropyl alcohol or acetone rather than water?

Accepted Answer

No,don't know what will mix with this paint to dilute or clean tools. I try to clean my hands with: acetone,solvent,alcohol and no results. Some how some amount came of on my hands by hand cleaner mechanics used. Probably will come off in your hands in 2 weeks. On the car I clean with denatured alcohol before cumplit dry. For this  reason I warned everyone to wear gloves. I know gloves they stick to brush handles and come off. For this reason my hands got this paint on and have to wait 2weeks to clean by self.  From what I remember I used 2 different paints:1- Rust Bullet (gray color) 2-Sherlac Black (black color) for UV protection and oil protector. Know I'm spraying Fluid Film over and inside frame and stop rust. 
Never have a issues  cleaning my hands from a paint before includes Por15.
After 3 years looks good on North East

Question 4

Will metal blast hurt or remove anodized aluminum coating since contains 1% phosphoric acid solution ?

Accepted Answer

Most definitely

Rust Bullet MB24SP Metal Blast Rust Treatment and Rust Remover, 24 oz. Spray Bottle, Clear Liquid

Description

Have a Question? See What Others Asked

Common Questions