ZSLAIFU A 5V USB LED Light Strip, COB LED Strip Lights, White 5V LED Lights, Small LED Strip Light, TV Lights for TV Under Cabinet Kitchen Living Room Shelving or Displays (White, 3.28ft)

This little LED strip is really good. It’s bright, easy to set up, and works anywhere you can plug in a USB. The COB lighting looks smooth and clean without the usual dot pattern, and it’s perfect for adding a bit of extra light to shelves, behind a TV, or under a cabinet. For something so simple, it makes a big difference and feels like a solid buy.

These light strip arw perfect for light boxes printed off of 3d printers. Super bright, and also dimmable. And peel and stick option makes them simple to apply. Then cut off any extra. Couldn't be simpler. The price is pretty good too. Definitely will be buying more.

Great light that I can use in any application. I can plug it into the Wall (120volts) or I can use a power bank. Great for power outages.

Kind of nice, bright, adhesive strip not too strong. Easy to use switch. Please note, the circle denotes the switch, the top lit line is the reflection of the real light the one below.

These work great. Nice and bright white and the dimmer works perfectly.

Nice soft, even light, pure white light, not too crazy bright, easy to install, silent switching, and no heat at all - feels cold to the touch even after being on max brightness for 15 minutes. Dimmer works fast and doesn't just keep going up-down-up-down when you hold the button (like my ceiling fan remote, which I hate). When you hold the power button on this light strip, it takes about 2 seconds to go from full dim to full bright, or 3 seconds to go from full bright to full dim. Then it just stops there at that min/max setting instead of immediately going back the other way like my ceiling fan does. That's nice when you want it all the way up or down. Of course if you let go at any point while it's changing, it stops there. The power button has a little blue light that's only on when the light is off - handy so you can find it in complete darkness. Time will tell how long the actual strip light and its adhesive last. I mounted it on a piece of quarter round trim I already had in the garage, then attached the wood to the ceiling with blu-tac (no drilling) and secured the wire with a couple of staples (very tiny holes) so it isn't pulling on the LED strip or dangling over my work space. The painted white wood doesn't stand out much and also shields the light it so it's not shining directly into my eyes. My office has sloped ceilings because it was originally attic space which we converted into living space with heat & AC. Pics show light turned off and at max brightness, with other lights in the office also on in both pics. Phone camera doesn't capture the actual light quality difference, but if you look at the laptop around the keyboard, you can see a lot more detail with the light on. Also the back wall is much brighter, and that bounces a lot of light onto my work area too. There were a lot of shadows in this corner of the office so I needed a work light and this fit my needs and budget perfectly!

There is both a general quality problem and a separate one that was specific to my unit. My unit stopped working after installation. I didn't feel like returning this, and usually if a device like this just quits, it means that power is cut somewhere. So I pried open the switch casing and found that one of the four wires (two in the cable coming into the casing and two in the cable exiting it) had detached. The other three wires had clean bare wire stripped of insulation and had a solid connection. The broken wire had a small lump of insulation which appeared to prevent if from being securely soldered to the board. I cut away the insulation, and resoldered it. That was the specific problem. The general one was that insulation of the cable was stripped away such that the inner wires were almost visible at the entry and exit of the casing. The casing has internal stays that are to grip the cables, resisting accidental tugs, but they require the cable insulation to do so. To address this, I glued the cable insulation to the casing. Since both sides had the same problem, I believe it is one of general quality. It looks ok and works now. Aside from these initial problems, I like the unit, it's elegant on/off/dimmer switch, and how it looks in operation.

Very bright nice consistent lighting. I like the color of the light and it works well in 3d printed light boxes. Unfortunately after just a day the adhesive had popped off in a few spots. I was able to re-adhere it but it came up again. I'm probably going to have to glue it down. I also liked the dimmable feature.

Nicely under my table lightening the floor, 3 setting is perfect.

Es de buena calidad, buen material y parece duradero, espero que funcione bien

es lo que te muestra la imagen

They are bright and easy to use but the sticky backing that it adheres it to other items is subpar, we found after a day or two it started to easily peel off.

Útil