ID-COOLING SE-903-XT V2 Black CPU Air Cooler, 100mm PWM Fan, Direct Touch Heatpipes, Compact Tower Design, Low Noise, Intel & AMD Compatible

I replaced the stock cooler on my Dell Optiplex 7080 (i7-10700 CPU). Perfect fit, I was able to use the existing Dell backplate and did not have to remove the motherboard. This Dell PC uses a standard 4 pin CPU fan connection, and there was no BIOS warning going from the stock 80mm fan to the included 92mm fan. I saw a 25 degree drop in temps at load, although the old thermal paste was pretty crusty. Easily fits the mid tower case and clears the RAM. The PC is much quieter now that the CPU fan isn't constantly ramping up and down. An excellent upgrade.

Have been using this CPU cooler for a few years now and it is still holding strong, pretty quiet operation and very good temps. Highly recommend!!!

Works great on an 85W TDP processor. I wanted a compact basic cooler without lights. The fan is quiet.

Four stars is fair for this product. If it was solely based on value I would give it 5 stars. Let’s start with the instructions. They are fine I was able to get it installed fairly easily. The build quality is pretty good for the price. I like the look but I struggled to get the fan attached but got it after a minute. It isn’t too noisy but it works pretty well. The only issue I have is that my Ryzen 7600X will sometimes see temps around 90 degrees C when playing Hogwarts at 120fps at 1440p with a 9070XT.

This was my first time installing this kind of Cooler. It is a little more annoying than the kind that doesnt need you remove your motherboard to install the back plate but its worth it, and probably less annoying when building a new PC. But Anyways just pay attention to the instructions included, and make sure you install the brackets with the screws in the centers upwards, as this is what the radiator will attach to. And dont over tighten it. Just until it stops wiggling. My CPU was running IDLE at 60 degrees Celsius, and now runs much cooler at 40 Degrees Celsius. Even under it load doesnt get much hotter. I did make upgrades to my system, as it was a gift. I guess the new ram sticks, as they are technically mis-match, made my CPU run a little hotter despite a 12GB upgrade. The cool thing is that I can bring this to my next build if I want, but I most likely will just order another one since its pretty affordable. I definitely recommend this, I cant attest to overclocking or anything like that. But it fits what seems like every socket type, although I saw no mention of AM5 socket but if you know if AM4 and AM5 are similar in terms of screw placements, then this may not be bad, but if youre running DDR5 then you probably can afford a better cooler even water cooling anyways. This is my very first PC experience and honestly everything is idiot proof lol. My grandma probably could install this.

These things are shockingly good for the size and the price. Like really shockingly shockingly good. I have the previous version of this thing on my emulation/tv gaming computer in my rec room which is an older build 5600x/6700xt and even on games that push the hardware the CPU maxes out at 73C. Is that kinda hot? It is vs a $100 big air cooler or AIO. Is it well within specs for that CPU? Absolutely. For $14 it's impossible to beat and these are my go-to coolers for basically any build that isn't getting overclocked or a known "hot" processor. I see all these builds with crazy cooling setups and obviously ppl can build however they want. It's one of the awesome parts of the hobby. But 90% of the time, this $14 cooler would be more than enough for a build that someone spent 10x as much for a RGB AIO.

Decent cooler. Small and compact meant for smaller pcs. You can get better but this isn't a wrong choice. Quiet and i recommend for people who have 20$

El cooler mas barato I el mejor para gaming

Wonderful cooler. Honestly. I didn’t not think it would perform well but I put it on my Ryzen 3 2200g cpu without thermal paste as I needed to run some tests and was surprised it kept it cool at a nice 60 degrees Celsius. Fan was quiet too. Zero compaints.

Micro-ATXケースで高さ制限があるので、全高120mm前後のクーラーを探していました。Ryzen 5 5600Gに使用しましたが、すっぽん防止ブラケットが付けられるコンパクトなクーラーは、現状これい一択かもしれません。取付け自体は、それほど難しくはありませんが、ヒートシンクをマザーボードに取付け、最後にファンをスプリングで取り付けるのが、結構難儀でした。ゲームもやらず、マザーボードがA520でオーバークロックをしませんので、冷却に関しては全く問題ありません。

I installed this cooler on a Ryzen 5 3600. Installation was easy, the included instructions are clear enough, I just wish they labeled the screws and the standoffs better since I spent longer than I thought I would on figuring out which ones to use. Also, the included thermal paste comes in a little sachet, and there is barely enough for one installation so if you get it wrong, you won't have more to re-apply. With this cooler, the CPU idles at around 34 degrees and when under load, it stays at around 75 degrees. I'm genuinely impressed by how good this little cooler is. It only has a 92mm fan and 3 heat pipes, yet it's able to keep the temps under control. Overall, I'm genuinely impressed by this cooler.

I bought this because it was the cheapest cpu cooler I could get my hands on, amazon. It cools well but people know this is a cheap cooler by looking at it.

Cooler is small which is perfect for my mini-ITX build. Keeps temps of my 7600x CPU at 75C at max load, 44C at idle. 1 star off for the fins bending a bit to attach the fan but nevertheless does not affect performance.