Thermo-Tec 14130 24" X 48" One Sided Thermo Guard Flame Retardant

I originally purchased this to replace the insulation on my Jeep Wrangler when adding a new floor liner between the passenger and driver side of the center console. It was pretty easy to work with although you need a strong cutter or sharp scissors as the cloth material is pretty dense and can be hard to work with unless you have sharp tools. After having some issues with heat soak I decided to wrap some of this around my fuel rail and the troublesome injector and it appears to have helped reduce the affect of ambient heat on the fuel line as the rough idle and misfiring has stopped. The temperature has been around 70F outside so it will be interesting to see if I run into any issues over the summer with it. It also appears to have slightly improved fuel economy ever so slightly (nothing significant, perhaps much less than half a mile per gallon).Pros:Relatively inexpensive.One roll should be more than enough for most vehicle/home applications.Ease to work with (comes thick but you can simply reduce the amount of fiber by pulling a part from the backing)Extremely high temperature threshold (1500F~)Cons:Need to be creative with how you apply it. Does not come with an adhesive side but get some double sided tape, aluminum tape, or zip ties and you should be golden.

My wife gave me an air frying oven for my birthday.The only problem is that the instructions indicated that the oven should not be operated under a cabinet, which makes sense due to the high heat generated by the oven.We had two options: pull the oven out during use to prevent damage to the upper cabinet, or purchase this item to insulate the bottom of the cabinet.I chose the second option, using this product to insulate the heat between the oven and the under side of the cabinet.The product was easy to install, using scissors, and it solved my problem. As a result, the underside of the wooden cabinet is insulated from the heat from the oven.

Those of you with an E450 RV know how hot the passenger side foot space gets, was hoping this would cool this space but found it was not as good as hoped. It helped a little as there was nothing under the carpet.

I attached this under our cabinets and over our toaster oven, microwave, and electric kettle to help prevent fires and steam damage. I'm probably being paranoid about the fire danger but for about 20 dollars, this makes me feel better. I cut it to size and made it extra wide and still had a bit left over. I attached it (pink side up, foil side down) with little strips of heavy duty 3m double sided tape and it is holding up fine. It looks fine, which is to say it doesn't really call attention to itself, and makes me feel better since the toaster over especially generates a lot of heat.

Used it to insolate gravity feed gas tank that sits above exhaust manifold on 1950 tractor, worked perfectly.

I used this to go around an area where I will be using a propane oven/stove (in a van conversion). I had already painted cement board with high heat grill paint and used high heat adhesive and aluminum tape to install this. I feel really good about it, it's just another layer of protection. I've only cooked with the stove in this area a couple of times but I feel good about it.

I bought this to use on the far side of a heat shield for the under seat muffler on the 06 CBR1000RR. I have a Bazzaz tuner that resides under there that I was worried about getting too hot (there's an air gap between the module and the heat shield but it gets pretty hot under there.) After 20 minutes on the track I could smell melting plastic. When I removed the tail section body work I found a major melted mess.If this would have been in direct contact with the exhaust I would understand. Being that it was on the other side of a heat shield I was not very impressed. This would likely work well for sound and light heat (floor boards) but if your trying to insulate something that is a higher temp look elsewhere.

Product came excessively well packaged. It is a dark gray color and not the pink in the seller photo. Of course, this has no effect on performance. Cut to size and adhered to sheet metal housing with aluminum HVAC tape.Dimension was 24x48.25". Was easily cut with household scissors. Aviation/tinners snips also worked. Razor blade and straight edge cut the foil easily but left a tattered edge on the felt.