Borgen Wall Mount Pedal Hook for E-Bike & MTB - Black

This purchase really makes me smile. The quality and heft of these wall mounts far exceed what I expected coupled with a very competitive price point make these truly a superior product. And all the hardware was included to make mounting a snap. Usually I’m missing something but not with this product. My bikes look great and are secure, not to mention they are off the garage floor.

I finally got around to hanging these up. They are very solid and have plenty of area to hit studs or go into block. I used them in block with Tapcon screws. I hung three bikes up and love the way they look on the wall. They are in my garage and leave plenty of space for the car to still park and for the door to open. Would highly recommend.

I wasn’t sure what to expect from a bike wall mount that holds onto the pedal, but this thing works great. Installation was straightforward with just a few screws into a stud, and once it was up, it felt solid. My road bike hooks in by the pedal and rests securely against the wall — no wobble or slipping at all. What I really like is how much space it saves. The bike sits close to the wall, and it’s super easy to take on and off. Way quicker than some of the traditional wall hooks I’ve used in the past. I’m even hanging my commuter bike (slightly heavier), and it still holds without issue. The rubberized cradle around the pedal protects it from scratches, and the angle keeps the handlebars from swinging into the wall. It looks clean and organized in my garage, and I can finally park my truck without dodging bikes. Highly recommend if you want a simple, sturdy, and clever way to store your bike vertically.

Nice product. Built well, not cheap nor flimsy. I'm using mine a bit 'off book'. I'm hanging my bike vertically from the front through axle. I carry my road bike in the back of my truck w the front wheel off, and I don't want to put it back on just to store it until the next ride. Product works great for this.

This might not be your first choice, I know it wasn’t mine. I tried several other bicycle hanging systems, prior to this, without success. I have a small single car garage and 2 large bicycles to store, along with every other ladder and implement of destruction you would normally expect. Floor space is at a premium. All of the other Bike hangers, in every other configuration that I could find, would not accommodate both bikes. The Borgen pedal hanging brackets/system is able to snug the bicycle against the wall, at an angle. This was perfect for my needs! The wider parts of the bicycle is moved towards the ceiling, and leans the bike in toward the wall at the bottom. This maximized the usable floor space! As long as you keep the handlebars above your head on the wall, the floor remains open! In my one car garage, I can now park my car and make it to the door without banging my head on any bicycles! In addition to being an excellent fit, and a very clever ‘Out of the Box’ design, this is a Rock Solid mount, constructed of heavy gauge steel that almost disappears with the bike on the wall! Installation is extremely simple. - Position, level and hang the center pedal bracket (3 screws) high enough on the wall to provide head clearance you need. - Mark your tire locations on the wall, and mount the (2)provided wheel scuff plates with the 4 remaining screws. *Once the pedal bracket height was established, installation took less than 5 minutes! If you need to conserve floor space, this could be the answer for you! I was very pleasantly surprised to find such a well engineered solution for my storage issues. Highly recommended. Simple. Quality Construction. Easy installation. Low profile design. Maximizes floor space. Go forth and purchase!!! (To be absolutely clear, I am UNPAID for this review! I know I sound like a factory sales rep, but I just really like this product!)

Well, okay, so I have a BMC Team machine ALR1 cycle which I don't have a great place to store in the garage. I didn't really want to pick up a rack of any kind, and I happen to have a great small wall next to the Triumph which would fit the cycle perfectly with a mount like this. So, I went for it. Install happened to be perfect since the wall had a stud right where I needed it for the pedal hanger! But I'll warn you: if the pedal hanger doesn't have a great mounting point like a stud, this might not be the mount for you. At least with the included hardware. That said, if you were to use a more robust wall anchor (not included) it might be possible to substitute something else to meet the mounting needs. All in all, my wheelbase is about 39" and so the location I had to work with was ideal. I used both tire brackets, even though only 1 seemed to be necessary. So far, very happy with the purchase and with studs in the right place, I had no trouble mounting.

Worked well, my pedal didn’t fit at the crank arm so it’s spaced out an inch or two from the wall. Kit was great otherwise.

Very nice quality wall mounts! Easy to mount with the all the materials you need included.

The material is very solid, this is not going anywhere as long as it is secured properly. I was not too happy when I pulled the pedal bracket out, only to find there is not enough space for it to fit between the pedal and crank. I am not a fan of returning Amazon stuff as some say it is tossed away. So grabbed a grinder and shaved it down a little to allow sliding the pedal into place. Will smooth it out and touch the paint up. If they made the opening just 2-3mm wider it would solve this issue and not compromise the strength this has. I used both platforms, as it gives me some piece of mind. It gets a 5 but my review gives them a 4 due to the design issue, and the wish it had some more measurements online to verify. I do recommend this product however.

Wer ein Fahrrad besitzt, kennt das Problem: Wohin mit dem Rad, wenn es nicht benutzt wird? Die Borgen Fahrrad Wandhalterung bietet eine intelligente, platzsparende und stabile Lösung, um Fahrräder sicher an der Wand zu befestigen. Ich habe die Halterung ausführlich getestet und teile hier meine detaillierte Bewertung. 📦 Verpackung & Lieferumfang Die Fahrradhalterung kommt gut verpackt an. Alle notwendigen Befestigungsmaterialien sind im Lieferumfang enthalten: ✔ Halterung aus pulverbeschichtetem Stahl ✔ Hochwertige Schrauben & Dübel für sicheren Halt ✔ Wandschutzpad zum Schutz der Wand vor Reifenabrieb ✔ Anleitung mit klarer Schritt-für-Schritt-Erklärung 💡 Erster Eindruck: Solide Verarbeitung, durchdachtes Design und robuste Materialien. ⚙️ Montage & Installation – Schnell und einfach an der Wand befestigt 🔧 Einfache Wandmontage dank mitgelieferter Schrauben & Dübel 🛠 Montierbar in Garage, Keller oder Wohnung – vielseitig einsetzbar 🚲 Flexibel für fast alle Fahrradtypen geeignet (MTB, Rennrad, BMX, E-Bike) ✔ Bohrlöcher markieren, bohren, Schrauben festziehen – fertig! ✔ Für sicheren Halt muss die Wand tragfähig sein (z. B. Beton, Mauerwerk) ✔ Aufpassen bei Rigips- oder Leichtbauwänden – zusätzliche Verstärkung notwendig 💡 Montagezeit: Ca. 10 Minuten, einfach und problemlos! 🏋️ Belastbarkeit & Stabilität – Hält die Halterung, was sie verspricht? ✅ Tragkraft von bis zu 30 kg – ideal für E-Bikes & schwere Mountainbikes ✅ Pulverbeschichteter Stahl sorgt für lange Haltbarkeit & Rostschutz ✅ Softschutz an der Halterung verhindert Kratzer am Pedal ✅ Zusätzlicher Wandschutz schützt die Wand vor Schmutz & Kratzern 💡 Fazit: Die Halterung hält sicher und stabil, selbst bei schweren E-Bikes! 🚴 Funktionalität & Alltagstauglichkeit ✔ Platzsparende Wandaufbewahrung – Fahrrad hängt sicher & nimmt wenig Platz ein ✔ Schnelles Einhängen & Herausnehmen – perfekt für den täglichen Gebrauch ✔ Hält das Fahrrad waagerecht & sicher an der Wand ✔ Passt für fast alle Fahrradtypen & Pedale (außer XLC & Crankbrothers Stamp) 💡 Top für kleine Räume, Garagen oder Keller – endlich kein Chaos mehr! 🏆 PRO & CONTRA – Mein Fazit nach mehrwöchiger Nutzung ✅ Vorteile: ✔ Sehr robuste Verarbeitung & hohe Belastbarkeit (bis 30 kg) ✔ Einfache & schnelle Montage mit gutem Befestigungsmaterial ✔ Schutz für Wand & Fahrrad (Softschutz & Wandschutzpad) ✔ Platzsparende & stilvolle Lösung für die Fahrradaufbewahrung ✔ Funktioniert für MTB, Rennräder, E-Bikes & mehr ❌ Nachteile: ❌ Nicht ideal für sehr breite Pedale (z. B. XLC, Crankbrothers Stamp) ❌ Nicht für Rigips-Wände ohne Verstärkung geeignet 💰 Preis-Leistungs-Verhältnis – Lohnt sich der Kauf? Mit einem Preis von ca. 20–40 € (je nach Set-Größe) bietet die Borgen Fahrrad Wandhalterung ein hervorragendes Preis-Leistungs-Verhältnis. Die Kombination aus Stabilität, Schutz & einfacher Handhabung macht sie zu einer perfekten Lösung für Fahrradliebhaber. 🌟 Gesamtbewertung: ⭐⭐⭐⭐⭐ (4,8/5) 🎁 Tipp: Entdecken Sie außergewöhnliche Bildkalender, Puzzles & Leinwände – die perfekte Geschenkidee! 🖼️🧩 Erhältlich auf Amazon – einfach nach "Marco Warstat" suchen. 📆

Utilizzo questo supporto per appendere sia la mia MTB da 29 pollici sia la bici da corsa. Lo impiego con bici che non superano i 10 kg, ma con tasselli di buona qualità penso possa reggere senza problemi anche e-bike oltre i 15 kg: il materiale infatti è molto robusto. In dotazione sono presenti la staffa per il pedale (compatibile con tutti i tipi di pedali) e due staffe per le ruote. Se si vuole evitare di fare troppi fori a muro, è possibile utilizzare solo la staffa per la ruota anteriore. I tasselli sono inclusi nella confezione. La staffa per il pedale è inoltre dotata di una protezione in gomma per evitare graffi. Nel complesso è un prodotto eccellente per appendere le proprie bici alla parete; apprezzo anche l’aspetto estetico, perché sembrano quasi esposte in vetrina. Consigliatissimo!

Donne entière satisfaction

Duvara sorunsuz taktım. Bisiklet çok sağlam duruyor.