Omada 5GHz AC867 Wireless Bridge, 5km Distance, Gigabit(EAP215-Bridge KIT)

This was the easiest PTP I have ever used. I am very impressed with how quickly and easily it installed. I shot the signal about half a mile across a lake and it worked perfectly the first try when only lining up by eyesight. It passed traffic immediately once powered on and has been working great for about a week now. The only complaint is that the connections need a better cover for weather resistance. I feel like after some time, water will get into the connections as it is just a snap in plastic cover.

I bought this to share internet between two buildings on my property that are separated by about 800 feet. Set up was pretty easy and the ability to use the Omada app on my phone to verify signal strength and connectivity was a huge help compared with my previous failed experience in trying to set up a wireless bridge from another manufacturer. I'm still a little bit confused on how the instructions led me to set up logins and passwords on the two wireless units in the bridge, but I got it all working without many issues. Once it was working, it was great. I could achieve full bandwidth at my remote site, matching the performance I could get at the main site (several hundred megabits per second). It was stable and has worked well for us over the first couple months of use so far. I like this system a lot.

Very reliable, easy installation. Best bang for your buck, satable connection even with heavy rain, im Covering a considerable ground of mynarea with thjs kit. Recommend

I’m very impressed with the Omada EAP211. It has excellent range and works very well. The connection has been reliable and consistent, and it was exactly what I needed to extend my network over a long distance. Overall, this is a great product for anyone looking for strong, reliable long-range Wi-Fi. I would definitely recommend the Omada EAP211 to others!

This bridge works well and gets great speeds. It comes with the main and client already paired and is essentially plug-n-play and is easily identified by Omada Controller. The bad news is that for some unfathomable reason, Tp-link gave it a POE port that is passive-POE only. No matter what, both ends require two wires run to them, one for power (either ethernet or DC power) and one for data. It does not support active-POE and cannot simply connect to a POE switch like most APs, etc. I'm using it to get WiFi inside a metal-sided barn a few hundred yards away. WiFi won't penetrate metal buildings, so the bridge is on the outside wall connected through the wall via ethernet to an EAP610 inside the barn. Works great, but requires two wires run through the wall on both ends. What were they thinking?

This bridge works as advertised. I have great signal speed from my house to my shop 400 feet away. Easy install and setup.

These were very easy to install. After mounting them and using a small carpenter’s square to sight along and aim them at each other I connected the PoE cables and they powered up and worked right out of the box. I have WiFi in my shop now. I’m very happy with them!

Quality, packaging and presentation are five stars. Ease of installation I would say is also five stars. Looks and range are also five stars. I just installed these with a clear line of sight but at different altitudes and about 300 meter apart. They created the bridge without any issues, as soon as I turned them on. Like I did the alignment by eye and it worked perfectly. The only issue I had, and it was a pain in the you know what, was when I tried to connect an EAP650 outdoor antenna to the client AP via ethernet cable through the LAN ports that where available. That just didn’t happen, no matter how I tries to configure the system. I tried using Omada App and I discovered that my EAP215 firmware was out of date. So I contacted customer service, give them the serial number of my EAP215 bridge antennas and they updated the firmware for me. They were super helpful and fast. To my surprise after the update, my client antenna started to work also as a 5Ghz router antenna, with a very decent coverage. I tested the speed at about 139mbps download speeds. I will give more updates after I try connecting my other antenna to the LAN port. The only reason I'm giving 4 stars is because the installation instructions are missing details like to check for updates as soon as you turn on the antennas and they also lack instructions for the scenario that I was trying to do (connect an EAP650 outdoor antenna to one of the LAN ports on the client side).

Ótimo produto

Having used the previous generation of these devices, based on the PharOs platform, these work better than I expected. Those Pharos based ones stopped working after about 8 years in the field (literally a field!) and it could have been a cable fault, but as they’re are mounted about 8m above the ground, in a location not easily accessible, we opted to replace them (and the cabling) with these, to bring them into the Omada platform that we’ve been using for the rest of the site for sometime. The build quality is good, although expect the plastic to yellow in the sun, but it won’t go brittle. They use exactly the same mounts and housing as the previous generation, so you could literally just swap the AP out, if the cabling and mount are good. They’re not certified to transmit as far, I forget the exact numbers, but I think it was about 15Km on the old platform, verses about 5Km on the new. That wasn’t a concern for us, but could be for others. The setup of the devices was a piece of cake, we installed the Main AP on the main building where the Controller is situated, and the client one at the other building. Once the client AP was powered up, using the in box PoE adaptor, they automatically paired and began working. The speed is nothing to write home about at only 800Mbps, but this is 10x the internet uplink, and only needs Kbps to function as intended. All in all they provide great value too, as you get two APs in the box, preconfigured, whereas with the previous generation, they were about 3/4 of the price, but you only got 1, and had to install software to configure them. These are also part of the Omada platform, so you get all the benefits you would expect from using that platform. In addition, the bridge APs also functioned as client APs, allowing devices to connect if there wasn’t a better positioned AP to handle the traffic.

Se compró esta antena en diciembre y se instaló en el mes de febrero, de inicio funcionó muy bien después se desconectaba con frecuencia y ayer después de 5 meses de uso una de las antenas ya no prendió, mi pregunta es aún tiene garantía con el fabricante ?

These devices are awesome. Super affordable, easy to configure, weather resistant and fast. I've installed mine in a heavily-forested rural area about 100 meters apart with excellent throughput and extremely low latency. They've been subjected to heavy rain and snow without skipping a beat.

Fitted and turned on. Set it up and it worked. What I was looking for. Great coverage in the garden now.