ODK L Shaped Gaming Desk with LED Lights & Power Outlet, 150x102 cm

I bought the 168 cm x 120 cm table, and after measuring it out against the smaller table, the extra few inches really do make a difference. I had tre carbon fibre design. Anyhow, the table itself is nice and sturdy with no noticable wobble, it pretty solid and has in general a great amount of space for you to do stuff on.The shelf basket thingy's are great for storage, and the PC space is great and solid and I have no worries of it breaking as my PC isn't the lightest thing on the planet, though it is difficult to get to the back of the PC to fiddle around with ports, but I knew that when purchasing. Additionally, the plug sockets are a great addition, two UK sockets and two USB ports, though if you want to use the LED lights you will use one of the USB ports, but that is a minor thing.There was however a slight hitch with the instructions. The initial page which shows you Left or Right is wrong in a way. As per the photo I have attached, the top diagram is for the left corner as written, but the image shows that it has the right corner, and the bottom is vice versa. As written is correct, the diagram is not. The next page as per the second photo I have attached will be correct in that it is the right corner build, with the next section being correct way to build it with the left corner. I found this out the hard way, and lets just say with the language used, I'm glad there weren't any children around. Other than that, no real complaints.Building it was a pain, but I did it by myself and with not a lot of space to maneauvre so that is my fault really, and the instructions did say two are recommended to build. I built it in 3 hours (though that was because of my initial finding out that I followed the diagram on the start of the page was wrong, and I built it wrong twice because I didn't follow the instructions so that was entirely my fault). If building with 2 people it is entirely possible to put this together in about 60-90 minutes, and if by yourself, about two hours, two and a half tops. Otherwise, I did have fun building it, and was in general really simple. It came with all the screws and gadgets needed, and there were spares just in case one went missing so that was nice, so I have a few screws of each spare to do with as I wish.All in all, I highly recommend this desk for the price and the carbon fibre design looks really good.Read less

I bought the 168 cm x 120 cm table, and after measuring it out against the smaller table, the extra few inches really do make a difference. I had tre carbon fibre design. Anyhow, the table itself is nice and sturdy with no noticable wobble, it pretty solid and has in general a great amount of space for you to do stuff on.The shelf basket thingy's are great for storage, and the PC space is great and solid and I have no worries of it breaking as my PC isn't the lightest thing on the planet, though it is difficult to get to the back of the PC to fiddle around with ports, but I knew that when purchasing. Additionally, the plug sockets are a great addition, two UK sockets and two USB ports, though if you want to use the LED lights you will use one of the USB ports, but that is a minor thing.There was however a slight hitch with the instructions. The initial page which shows you Left or Right is wrong in a way. As per the photo I have attached, the top diagram is for the left corner as written, but the image shows that it has the right corner, and the bottom is vice versa. As written is correct, the diagram is not. The next page as per the second photo I have attached will be correct in that it is the right corner build, with the next section being correct way to build it with the left corner. I found this out the hard way, and lets just say with the language used, I'm glad there weren't any children around. Other than that, no real complaints.Building it was a pain, but I did it by myself and with not a lot of space to maneauvre so that is my fault really, and the instructions did say two are recommended to build. I built it in 3 hours (though that was because of my initial finding out that I followed the diagram on the start of the page was wrong, and I built it wrong twice because I didn't follow the instructions so that was entirely my fault). If building with 2 people it is entirely possible to put this together in about 60-90 minutes, and if by yourself, about two hours, two and a half tops. Otherwise, I did have fun building it, and was in general really simple. It came with all the screws and gadgets needed, and there were spares just in case one went missing so that was nice, so I have a few screws of each spare to do with as I wish.All in all, I highly recommend this desk for the price and the carbon fibre design looks really good.

I have had the desk up for nearly 2 weeks, i wasnt sure about ordering it seeing some of the reviews, but as i subscribe to 'people are idiots', i chose to buy and do my due diligence while building. (forgive the mess in the picture, id just finished setting it up)It took almost 3 hours to build the desk alone, some people have complained that the instructions are mixed up but actually 'people are idiots', ensure that you pay attention to the location of the holes reflects the page your looking at.i would have liked the desk to be deeper, and the shelf also, the only wat my monitor will fit is in the corner in the photo, now i find myself having to lean forwards while working from time to time missing the support of my chair as there isnt space to get right under the keyboard in the corner.Complaints about screws being to long and breaking the wood, be careful is all i can say, all the screws into wood are finger tight, i only used the tools provided, if you over tighten it will break the wood, mine is perfectly sturdy with screws finger tight rather then over tightened.Last thing to note is the Power bar that comes with the desk, (note: im not an electrician) i did some probing and eventually had to dismantle the power bar to check its safe... the whole rail in rated up to 1500W if i remember correctly, it may not run your computer plus everything else you want to plug in. the USB-A sockets are able to run at a max of 10V 2AMP each if i remember my research correctly, if you want to charge 2 Phones/Tablets or run anything equivalently power demanding for long periods of time, expect it to heat up and possibly flames. the transformer is big enough to handle the current, but not to dissipate the heat, sustained current will cause damage, your milage may very.In conclusion, The product is better then i expected, its very sturdy and perfect for a cheap corner desk as long as you respect it during assembly and dont overly rely on the Built in power strip.

If you’re looking for a good sized all round desk then I would definitely say this is a good shout. The build was fairly simple. It is recommended that you put it together with a second person and although it’s possible solo, I would strongly advise that you heed the advice. The frame is solid and the overall design is quite smart. I like that they have added the wooden panel in the corner to put your PC, as well as the below-deck storage panels. My only critiques are that with the black variant, I found upon opening that some of the legs had been scratched and bare metal was visible. Additionally, not all screw holes were accessible due to misalignment. Luckily in my case, these fittings were redundant and the sturdiness is not compromised. In conclusion, if you are looking for slick look then I would advise looking at a higher end model; however if you’re looking for a gaming desk without compromise then this is a decent find.

Very impressed with this product. Quite a few parts, but of very high quality. Nicely machined for interconnectivity. The fastenings are of high quality with spares for everything. All parts complete and in good order. It takes a couple of hours to put together if you proceed slowly and methodically. The instructions are 95% excepting a slight misunderstanding between my brain and parts L & K, however, this was overcome quickly. All in all I really enjoyed putting this together, normally I leave flat pack to my better half who has more patience. Great value, straight forward and good quality solid final product. Nice Carbon style finish.

First of all, when I opened the box It was quite daunting with the amount of parts, but wasn't as hard or long to assemble as I initially thought.The carbon effect is actually quite good, I was fully prepared for a rather cheap look as you get with some carbon effects. The vinyl (or whatever material it is) seems quality aswell and daily hard-wearing.The desk once assembled is very sturdy and although it's a somewhat shallow desk-space, it's more liveable than I thought initially, even for my dual use case for gaming and general light home office work. The LED's are nice and bright and somewhat premium in that they come inside a diffuser strip.The shelves are also quite decently sized, for a somewhat small desk setup, it's executed quite well offering plenty of under desk storage space and good leg room, the additional sockets in built for charging my phone is brilliant instead of me reaching in the back corner for an extension lead constantly too

Probably the easiest and best instructions to flat pack I've done in a while, very well put together, sturdy modern desk and looks fantastic. Plenty of room for all my needs. Highly recommend. Also love the Carbon Fibre desktop and LED lights a nice touch 😀

For the price i expected a little more buy overall the desk is great quality. Biggest complaint is how difficult it is to put together and the instructions are INCORRECT. They give you an option of which way you'd like the L shape to go and they incorrectly put the instructions for the left side to the right side.

Took forever in a day to arrive but it arrived before Christmas so can't complain was a pain to build but I managed it on my own son is very happy with it although the shelving for the monitor could do with being slightly wider to accommodate different monitor bases other than that all in all a very good desk it is quiet big and the added lights and sockets it's a nice touch.. Thank you for your service.

Excellent rapport qualité-prix. Il est solide et a un beau look. Cela prends plusieurs heures à monter, mais le résultat est plus que satisfaisant. Je le recommande.

After assembling my new desk last night, I figured I'd chronicle the process and my initial impressions!Shipping/Packaging: 5/5Everything arrived in what I've come to know as pretty standard form for shipped furniture, but the corner guards in the box were definitely heavy duty. Even if the box was roughed up in transit, I don't doubt the table remains completely fine.Assembly/Instructions: 4/5While the instructions were very clear and concise, the assembly by myself took 4ish hours. Could probably have trimmed that time down, but it is a lot of bolts to secure the shelves, legs, and desk surfaces. The included tools are nice, but you DEFINITELY want an electric drill to save on some time. Make sure to dial back the drill to its lowest torque setting so it doesn't drive the screws in too hard!The integrity of the desk is already apparent, though. I don't doubt it will hold up very well.Form/Aesthetic: 5/5This desk is EXACTLY what I was hoping for. The carbon fiber looks clean. The shelf space is great for anything I could want to store away, and more than adequate for my rig. The monitor stands are the perfect height, and the LED strips are simple but add the perfect kind of accent without feeling gaudy or cheap. If I had a single gripe, it may be that the monitor stands are a little shallow, back to front, and larger monitor feet may not rest completely on them.Speaking of depth, the front to the back of the desk is shorter than my previous desk, but still allows ample space for keyboard, peripherals, and anything else I may want to have on my desk.All in all, I'm stoked with this purchase, and look forward to putting it to good use over the coming years!

Easy assembly, Decent Quality desk, sturdy, love the LED's but 2 of the plastic LED wire holders came broken other than that solid desk 9/10

The product is sturdy and of very good quality. It's a bit complicated to assemble, but it's worth the time and effort. The accessories could have been more comfortable, like being provided with a T-screw driver. The base area is not very comfortable for a huge laptop. My laptop is nearly at the edge of the table or eve a little outside the table (Alienware).