Lifewit Acrylic Floating Shelves for Bathroom 14" Clear, 4 Pack

Very nice and looks kid with my daughter’s collectables

ممتاز

Good but some came not clear

Very good quality, I only wish that they provide plastic washers so it won't break when over tightened.

Étagères discrètes mais qui font le travail. J’en voulais en plastique pour mettre dans la salle de bain. J’y mets des produits du quotidien plutôt légers même si elles semblent assez résistantes. Le petit rebord est un vrai plus qui empêche les produits de tomber !

Etagères assez belles, peuvent être placées dans un sens ou dans l'autre.

جيد

I have been looking forever for some kind of very shallow display cabinet for storing and displaying projects and works-in-progress for my model railroading hobby, on a wall where I have very little space. All the cabinets were too wide and too expensive. I found hundreds of shelves for nail polish, which are awesome, but too shallow for my purposes. These shelves are the perfect size! Because the shelves are clear it’s easy to see what is on them, even the ones above eye-level, and you don’t have to squat down to see the items on the lower shelves because you can see through the shelves above. Also, light goes right through, so none of the shelves are in the shadow Hi buddy OK you can come up here you go The shelves have a 1/2" lip on the front and 1/4" lips on the side, so items do not roll off. These shelves are big enough to hold 6-12 N scale cars or 4-6 HO scale cars, depending on the sizes and how you arrange them. O scale would work as well. The G scale cars I have are too big to fit. 4-inch vertical spacing is comfortable for displaying and accessing N or HO items. I spaced a few at 5 inches apart to hold some items that are in boxes. Strangely, the included screws were the countersunk kind, but the holes on the shelves are flush with the rest of the surface. So if you use those, they will probably work just fine, but will stick out a bit and look strange. They are the wrong hardware for the application. In any case, I used different plastic anchors (#8-10), a 7/32 wood drill bit, and white #8 x 1" pan head wood screws. These worked perfectly on my plaster walls, and look better than silver against my white wall. I ordered six boxes of six shelves each, not knowing how many I would ultimately need, and wanting a few spares. The shelves seem very sturdy, and even more so after they are secured to the wall. There is a raised area just behind each of the holes so that as you tighten the screws you are never bending or stressing the plastic. Even so, I am assuming at some point I could break or damage one, so I intentionally got a few to keep as extras, so I don't end up with a gap if I should break one a few years down the road. The wall you see in my photos took 18 shelves, at 4-inch and 5-inch spacing. I started about a foot off the floor to leave room for vacuuming, and then put a small chest of drawers underneath to create a visual barrier so I and others don’t walk into the clear shelves. I also left 10 inches clear at the top. I can put a few taller items, and I didn’t want anything crowded right up against the ceiling. 18 shelves hold a lot. ! This is a great use of space, where I really didn’t have any space. All of the shelves arrived in perfect shape. Each one is individually wrapped in a bubble wrap sleeve. As I said, I did not use the included anchors or screws. I also did not use the tiny bubble levels, but it’s nice that they include them. Instead, I used a 24” carpenters level. I put a strip of masking tape along the top of it and marked where the holes should go. Simply slid it up and down the wall, keeping one edge against the door frame, while marking where to drill the holes, to make sure all the shelves would be in alignment. The whole thing took an afternoon. A pro could get it done faster. This is definitely a project where you want to measure three or four times, and drill once! I only ended up with one anchor a little off-center, so that that shelf has screws just on the ends. I probably could have gotten away with that on all the shelves, but given that I want this to last many years I opted to go the safest route.

Mi hija tiene una buena colección de funkos y la mejor manera de exponerlos era en unas estanterías. Estas son para funkos! Encajan perfectamente y eso q los funkos los tenemos protegidos con una funda transparente especial. Son estanterias fáciles de colocar, ya viene con todo para montaelo solo necesitas un taladro, no pesan nada y son transparentes! He tenido que comprar otro paquete de estanterias porque no eran suficientes para todos los dunkos que tiene.