WANLIAN 170 Degree Hinges Frameless Cabinet Door Hinges Hidden Hydraulic Adjustable Mounting Hinges Soft Closing Stainless Steel Buffer Damping Wardrobe (2 Pairs of Cabinet Hinges)

Put these on a "hidden" closet door and they work perfect. They have a slow closer bit closer tight.They are a little hard to install because they are stiff. However they are well built and been going strong for over a year now.

Very Versatile hinge that is adaptable to inset/flush or face mount in a variety of different overlap proportions. It can even be flipped around backwards to use in shallow depth / low clearance situations. This is unusual because most wide throw hinges are single application specific. This hinge does not require a pocket recess in the door or frame and simply screws to the flat panel which is very nice. This was the perfect solution for faux wainscoting panel wet-wall access in a very visible location. Installation requires attention to detail. There is poor adjustability once installed, so start with screwing in the slotted holes first.

Love these hinges. Worked exactly as needed. Other comments true as well. They do have slack or slop, side to side. You better mount them correctly becuase there are no adjustments. Glad I read those comments. I was mounting a full length mirror flush against a wall. Mounted 3 hinges to mirror frame 3/4" from mirror edge. Held mirror in place, placed upward pressure on hinge then punched, drilled and screwed lower, away from mirror screw hole. Drew a line on bottom of one hinge. Opened hinges and lifted mirror. Not quite a 1/16th inch rise on mirror side of line. Set remaining screws. Mirror was aligned prefect. If I had to do over I might have biased the hinges upward to start with. PS Used #8 size screws as recommended as well. Thanks for comments.

Used these for my crawlspace door. Easy to install and have worked well to hold the floor door open and not have to lift the whole thing. I like the way the hydraulic adjustable hinge moves so the door doesn't fall back when open. Super happy with the purchase.

Used theses for a front downward door on my custom built-in bookcase and works great.

It would have been smart to test them out on something first but I was impatient and was able to squeeze inside an opening and position them on the inside to mark where to screw the holes, which worked out well. I got these because I particularly wanted a hinge that would lift the top clear of the frame since my top extends beyond the sides of the frame. These hinges worked well and they are kind of beautiful in the design of the mechanism.I also adjusted the one obvious screw to change the maximum angle and that shortened it up a bit so it stays more vertical and outs less strain in the shed when open.Not a slow close, be aware.

Those are great of great quality. However, don't use them for small doors. Unless you are working with some heavy doors, they are not the best to use. With small doors, you will have to put a lot of pressure to pull the door out as these tend to be really strong and have too much spring power. With heavier doors, the weight of the door overcomes the strengths and makes the operation of these hinges much smoother.

These are very nice hinges, well made and stout. They did not work for my application however because my cabinet doors are arched which doesn’t allow for a straight closure. I’m keeping them and will be able to use on another project